-
All In One Internal Parts Upgrade Bundle for Night & Day Improvement!
- Reduce your Trigger Pull by 50% and Eliminate Pre-Travel!
- Reduce Pre-Travel aka Creep, Slack and Slop in the Factory Trigger Pull with Laser Cut Trigger
Bar
- Reduce your trigger pull from a stock 9-10lbs to a modified 4.75lbs (Average results can
vary up to +/- 1lb)
- Eliminate Trigger Flex & Trigger Guard Flex with our Hard Coat Black Anodized Aluminum Replacements
-
Trigger Upgrade provides clean & crisp trigger pull for Improved Accuracy &
Performance!
- Upgrade the Factory Plastic Feed Ramp with a Stainless Steel Feed Ramp for Improved Feeding Operations!
- The Best of the Best from M*CARBO in One Easy Bundle!
- Guaranteed Night and Day Results!
- Includes All Internal SUB-2000 Upgrades for a Complete One & Done Installation!
-
Do you want Us to Install the Parts and Do the Polishing Work for You?
- Do you
want KEL-TEC to install your M*CARBO parts into your KEL-TEC Firearm?
- Functions in both the KEL TEC SUB 2000 Gen 2 & Gen 1
- All of our Best Custom KEL TEC SUB 2000 Accessories in One Bundle!
- Highest Quality American Spring Steel ASTM A228 Music Wire & 302 Stainless Steel Spring Wire
- All In One Bundle includes - All Parts and Tools necessary to get the most Performance out of your
SUB-2000!
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
What's Included:
Includes all Internal SUB-2000 Upgrades plus tools needed to complete the project.
KEL-TEC SUB-2000 All In One Pro Performance Trigger Job Bundle
Includes all Internal SUB-2000 Upgrades plus tools needed to complete the project.
Please be aware that this no longer uses or comes with the trigger shim as shown in the video
- KEL-TEC SUB-2000 Stainless Steel Feed Ramp
- Firearm & Feed Ramp Polishing Kit
- KEL-TEC SUB-2000 Performance Trigger Bar
- KEL-TEC SUB-2000 Extended Magazine Release (Glock or Multi-Mag)
- KEL-TEC SUB-2000 Trigger Spring Kit
- KEL-TEC SUB-2000 Aluminum Trigger (Curved or Flat)
- KEL-TEC SUB-2000 Aluminum Trigger Guard
- KEL-TEC SUB-2000 Stainless Steel Hammer Bushing
- KEL-TEC SUB-2000 Carbon Steel Screw Upgrade Kit
- Set of 5 - Black Oxide Carbon Steel - Grip Pins
- SUB-2000 Armorer's Wrench
- SUB-2000 Assembly Dowel
- 2 - 2.5mm Allen Keys
- Loctite 380 "Black Max" Plastic to Metal Instant Adhesive
- Synthetic Grease w/ PTFE Teflon Lubricity
Our Full Line Up of KEL-TEC SUB-2000 Internal Upgrades for Un-Matched Performance Gains you won't find in any other SUB-2000 Gen 2 Accessories or Gen 1 Accessories. We worked our way from the Inside Out to give you the type of SUB2K Performance we all immediately wanted out of the box... introducing the All In One SUB-2000 Pro Performance Trigger Job Bundle!
We highly recommend installing all of these upgrades at the same time to get the lightest trigger pull and most performance out of your SUB-2000. The really nice thing about this bundle is that it includes all of the parts and tools needed to install everything at the same time rather than opening up your SUB-2000 each time you want to gradually upgrade it. Not to mention it's going to shoot like a completely different Pistol Caliber Carbine when you're finished! You just might get completely addicted to your SUB-2000 after you feel the results!
Do you want Us to Install the Parts for You? We can also polish the feed ramp if you like.
The Best of the Best M*CARBO KEL TEC SUB 2000 Accessories in One Easy Bundle! Replace your Factory Plastic Feed Ramp with a 416 Stainless Steel Feed Ramp. Improved feed ramp geometry to better assist feeding rounds into the chamber. Improve Feeding Operations and Reduce Malfunctions! The KEL-TEC SUB-2000 All In One Trigger Job Bundle will reduce your trigger pull weight from a factory 9-10 lbs. to a crisp 4.75 lbs. The Machined 6061 Aluminum Trigger will eliminate Trigger Flex commonly found with plastic factory trigger! It's also Tumbled Smooth & Hard Plated with Black Anodizing for Superior Strength and Durability. Your Aluminum Trigger is paired with a Precision CNC Machined 6061 Aluminum Trigger Guard as a Match Set! Tighter tolerances than factory plastic trigger guard to prevent wobble and more sturdy lever when folding barrel assembly. M*CARBO Specializes in KEL TEC SUB 2000 Gen 2 and Gen 1 Performance Parts! Custom KEL-TEC SUB-2000 Gen 2 Accessories by Combat Veterans!
All of the Tools needed to perform the installation as quickly as possible.
- SUB-2000 Armorer's Wrench is the SUB-2000 Multi-Tool with 4 different functions to assist you in the installation process and Remove the Metal Collars on the Gen 1 and Gen 2 SUB-2000.
- SUB-2000 Assembly Dowel is the proper length and thickness with smooth machine cut ends to assist in pushing the hammer back without damaging any internal components.
- Two 2.5mm Allen (Hex) Keys are necessary to get the stock screws out of your SUB-2000, especially if they are stripped inside the bare aluminum factory grip pins.
- Loctite 380 "Black Max" which is the absolute Best Metal to Polymer Instant Adhesive available and is also used by KEL-TEC at the factory.
- Synthetic Grease with PTFE which is a patented Teflon grease formula designed to outlast and out-perform conventional petroleum based grease.
Absolute Must Have KEL TEC SUB 2000 Gen 2 Accessories for Increased Reliability and Performance!
What Gen is my SUB-2000?
All In One Internal Parts Upgrade Bundle for the KEL TEC SUB 2000 Gen 2 and Gen 1. Full line of Custom KEL TEC SUB 2000 Gen 2 Upgrades by M*CARBO for Maximum Possible Performance out of your SUB2K! All Custom KEL TEC SUB 2000 Parts work for both the Gen 1 and Gen 2 in this Bundle.
The only thing not included and recommended as a "Nice to Have" Tool for this build is the 2.5mm T-Handle Hex Wrench.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 All In One Pro Performance Trigger Job Bundle, then you might find the following KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 All In One Pro Performance Trigger Job Bundle has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 All In One Pro Performance Trigger Job Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Sub 2k bundle kit
A must for your sub 2k, complete package of everything needed to transform your s2k from nice to simply phenomenal! Chris Nelson's videos are extremely informative, as necessary in the instal phase. You not only get his knowledge of installation but a profound understanding of the functionality of each component. Simply the best! The replacement components are highly engineered and built to last with high quality materials.great feeling of satisfaction and accomplishment once you have completed your build!
Worth every penny
Amazing difference. Trigger excellent after install. Could not be happier with this kit. Your installation video is great. All parts excellent quality.
Sub 2000 trigger job
My sub's trigger pull was 6.5 lbs to start with and after the installation of the springs ect. the trigger pull went down to 4.5 lbs, the reset is alot better so I am very happy with the kit even though it's a little pricey.
Great kit
This is one of must for your kec tec sub 2000
Is this really half the cost of the gun?
I'm sorry...this trigger kit is literally half the cost of the fun it self. Half the point or more of a keltec is that its cheap....of I have to spend half as much again to get a different trigger, wouldn't I be better off spending the over 200 bucks more at the time of purchasing the firearm and just getting a better rifle with an already better trigger. Plus look at what your getting? Probably not 20 bucks worth of stuff to the company. That's just insane
Whooooo!
Im so glad I did this upgrade. No joke. Just like the other reviews say. Night and day difference no doubt. Completely different firearm after installing. Installing isnt hard. Take your time and if you screw up good..itll help you memorize how to disassembke/reassemble it faster later on. Just watch the video and take your time. Get a good dremel tool or something and polish the feedramp beforehand. Bighly recommend this upgrade.
Great Product With One Slight Problem
My Sub 2000 has just about every upgrade that M-Carbo makes and I love it! Great stuff! And I love the instructional videos. I don't know how I would have done the trigger upgrade without the video. The video is well done and clearly understood. My only complaint however, and it is a small one, is that the armorer's wrench which is included in the kit, does not fit the spring clip on the safety button. The prongs on the wrench are too far apart and the wrench is too thick to use the ridge in the polymar of the gun as leverage. I was able to remove the spring with a couple of screw drivers but it would have been easier if the wrench had fit. I've included a picture of the situation. The grind marks on the tool are from me in order to make the wrench thinner. But the prongs were still too far apart.
Kel Tec Trigger Bundle
The Trigger Bundle worked even better than I expected. Quality parts at a good price. It lightened the trigger pull up very well. I’m very happy with it.
Is the magazine it comes with compatible with glock 23 40 S&W?
yes, it work with the glock 23 40 S&W
Is this trigger bundle compatible with the Sub 2000 in .40 S&W?
Yes it compatible with the Sub-2000 .40S&W
What tools are needed to complete this project?
T2 October 28, 2022 9:29 AM
The required hex keys are included as well as the Universal tool. The only other thing that would help is a Gunsmith Bench Block and a dremel for polishing.
Will this fit the Integrally Suppressed CQB model?
Yes it will work in your CQB
Does the Kit fit a Marlin Model 60?
No this is only for the sub-2000 they are 2 different firearms.