KEL-TEC SUB-2000 Performance Trigger Bar
- Reduce Pre-Travel, Slack and Slop in the Factory Trigger Pull
- CNC Laser Cut from Aircraft Grade 4130 Pittsburgh Steel!
The New KEL-TEC SUB-2000 Performance Trigger Bar is physically shorter than the factory trigger bar to reduce the amount of distance the trigger bar has to travel in order for it to engage the tip of the sear. That reduction in pre-travel distance is felt by your finger as you pull the trigger and feel the sear engagement quicker and more crisp than ever before. This is a first of it's kind for the KEL-TEC SUB-2000! The KEL-TEC SUB-2000 Trigger Job is not complete without this part. A must have KEL-TEC SUB-2000 Accessory that took us nearly 2 years to create!
Eliminating the pre-travel will allow any shooter to quickly improve accuracy and performance!
You have to feel the difference with your finger. With the new trigger bar, yes there’s slight pre-travel still, but the trigger is solid and not mushy at all. That pre-travel almost immediately hits the wall.
**The M*CARBO KEL-TEC SUB-2000 Performance Trigger Bar works for both the Gen 1 and Gen 2 SUB-2000.**
What Gen is my SUB-2000?
Reduces Factory Pre-Travel - aka Creep, Slack and Slop in the Factory Trigger Pull!
After you install the NEW KEL-TEC SUB-2000 Performance Trigger Bar your Trigger should be a smidge of pre-travel, solid wall, crisp, clean break.
Click here to check out the R&D reports in the forum!
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Performance Trigger Bar, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Performance Trigger Bar has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Performance Trigger Bar. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Simple
An easy to install upgrade. I do not know if it is really necessary but since I was doing a complete internals upgrade I installed this as well. The stock internals are lacking.......especially the trigger.
Helped with sloppy trigger.
This wasnt a necessary upgrade but did take most of the slop out if the trigger. Not a problem on a 100 yard gun IMHO but already putting in other parts so why not ? Excellent machining.
shorten the trigger pull
It didn't make as much difference as the spring kit did but but if you are the kind of shooter that likes a shorter trigger pull and faster reset this is a nice upgrade
Better trigger feel
An easy to install upgrade that makes the trigger feel better. The stock Kel-tec trigger is not impressive
Crisp and clean pull now
Now this was included in the "All in One Performance Bundle" but comparing the original stamped steel trigger bar to the "performance" trigger bar you will definitely notice the difference. Besides almost a 5 pound trigger pull difference with the complete bundle (springs, bushing, trigger, and trigger bar) the quality is much better and much improved. MCarbo never disappoints in quality.
Christopher
Kerrville, TX
Better
While I'd say the shortening of the pull isn't fantastic, it is at least noticeably shorter and far crisper of a break. It is nice to see a properly finished product verses the rough stamped OEM part.
Wow!
At first did not oot for this product. But I had a change of heart and am really glad I did. Makes all the difference when installing other trigger parts. The trigger goes from okay it works I stock form. To this is worlds better, with spring kit. To the point of really great, feels like a really good normal trigger, which the stock one was definitively NOT!
Does this also reduce the stacking/mushiness that occurs AFTER the wall? This stacking travel seems longer than the pre-travel before the wall.
defiantly will improve the feeling of the trigger and reduce or eliminate that feeling of mushy especially once you add a trigger kit.
Will the bundle upgrade kit parts void my KELTEC factory Warranty?
Hello, if installed by Kel-Tec or an M*CARBO Gunsmith, it will not void the warranty