KEL-TEC SUB-2000 Trigger Spring Kit

  1. Custom Lighter Hammer Spring
  2. Custom Lighter Sear Spring
  3. Custom Lighter Trigger Return Spring

The KEL-TEC SUB-2000 Trigger Spring Kit will reduce your trigger pull weight from a factory 9-10lbs. to a crisp 5.25lbs. According to KEL-TEC, the SUB-2000 has a factory trigger pull weight that can vary between 9 and 10lbs.

M*CARBO now offers the KEL-TEC SUB-2000 Trigger Adjustment Solution that has been highly reviewed and acclaimed as one of the Best KEL-TEC SUB-2000 Accessories on the market! It's even used by the KEL TEC Shooting Team, ask them how they like their new trigger pull at their next event! This Kit is made of the highest quality spring steel available, right here in the USA.

The KEL-TEC SUB-2000 Trigger Spring Kit will improve your accuracy and tighten your shot groups. Reduced malfunctions should be expected because the KIT springs are constructed of the highest quality 302 stainless spring steel & ASTM A228 music wire. This is the best way to upgrade the trigger on your KEL-TEC SUB-2000!

Introducing the all in one KEL-TEC SUB-2000 Trigger Job from M*CARBO to reduce your trigger pull, reduce malfunctions and improve accuracy. This Kit will work for both the Generation 1 and Generation 2 models of the KEL-TEC SUB-2000. If your looking for KEL TEC SUB 2000 Accessories then you need to do a SUB-2000 Trigger Job and feel the difference for yourself.

Why not do all internal upgrades at the same time while you have your SUB-2000 disassembled? Take a look at the SUB-2000 Pro Performance Trigger Job Bundle to do just that!


KEL-TEC SUB-2000 Owners Manual & Exploded View:

If you're getting the KEL-TEC SUB 2000 Trigger Spring Kit, then you might find the following KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project. Print or Download the SUB-2000 Trigger Spring Kit Instructions by MCARBO.

No Hassle 100% Lifetime Guarantee on Parts & Accessories:

The KEL-TEC SUB-2000 Trigger Spring Kit is protected by the M*CARBO No Hassle 100% Lifetime Guarantee against any product quality issues or workmanship defects. If parts fail or are deemed defective we will send you a replacement regardless.


Drop Tested and Approved:

M*CARBO ASTM Spec Springs will offer a perfect trigger pull reduction with an unlimited drop test rating (3", 6", 9" & 12"+).


Range Tested and Approved:

The KEL-TEC SUB-2000 Trigger Spring Kit has been tested repeatedly with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made KEL-TEC SUB-2000 Trigger Spring Kit designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Q: Will this kit work for the Gen 1 or Gen 2?

A: Yes the KEL-TEC SUB-2000 Trigger Spring Kit will work for both the Generation 1 and Generation 2 models of the SUB-2000.

Q: Is it a collar or castle nut on the rear of the SUB-2000 trigger housing?

A: The Gen 1 has a collar and the Gen 2 has a castle nut.

Q: What do you recommend using to remove the Gen 1 collar?

A: A strap wrench would be best. If you don't have one you could use a rag and channel locks. Try your best not to scratch up the collar.

No Hassle M*CARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. No Hassles Ever!

We even pay return shipping and automate the return process here!

We pride ourselves in making quality parts for people like us that appreciate great performance out of a well made firearm. So if you don't get the results you were expecting or just don't like it, we will make it right by any means necessary. Send us an email to help@mcarbo.com. We pride ourselves in outstanding customer service so send us an email and we will show you!

Once you're part of the M*CARBO Brotherhood your not just a customer...you're a Brother! M*CARBO Brotherhood - Veterans, Police Officers and 2nd Amendment Patriots! A portion of all sales go to the Military Foundations we humbly support.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 242 Reviews:
Az

Great kit

Rating:
Pros:
Cons:
Everything you need works well and nicely made installed with minor difficulties, trigger went from stiff to smooth as hot butter!The difference is night and day.

North Carolina

Quality

Rating:
Pros:
Cons:
This kit took my good Sub2k to a great Sub2k

Get it!

Rating:
Pros:
Cons:
Took my trigger press to 4lbs. Very easy to install with Chris' awesome video. I am very pleased. Thank you Mcarbo.

Worth every penny

Rating:
Pros:
Cons:
Springs and pins are a definite worthwhile short money investment. Do it

Arizona

Hammer Spring Too Weak

Rating:
Pros:
Cons:
I’ve bought nearly every MCarbo mod for my gen 2 Sub 2000 with fantastic results. I decided to install their battle trigger an spring kit to lighten the trigger. It took my 9lb trigger to 5.3 lbs, but I started experiencing frequent failure to fire. I noticed the failed rounds all showed light strike dimples in the primers. This happened no matter what ammo I used (Federal, PMC or Sig). I re-installed the original hammer spring and the problem disappeared. The trigger pull only went up to 6.5 lbs. I think the kit’s hammer spring may be a bit shy of strong enough.

Number of questions: 0