• Non-Abrasive Firearm Polish
  • Clean, Polish & Protect Firearm Surfaces
  • Will not remove hot factory gun bluing
  • Poishing a feed ramp is vital to reducing FTF malfunctions!
  • Bullet Shaped Felt Polishing Bits Included!

Firearm & Feed Ramp Polishing Kit includes:

  • 1/2 oz can of Non-Abrasive Firearm Polish
  • 3 Bullet Felt Tipped Dremel Polishing Bits
  • 1 Pair of Black Nitrile Industrial Strength Gloves
  • 1 Microfiber Towel

Polishing your Feed Ramp greatly Improves feeding operations by eliminating microscopic machining lines that slow down the travel of the bullet into the chamber, thus increasing the chances of an Failure to Feed (FTF) Malfunction. Watch the video below for a "How to Polish Feed Ramp" instructions.

Flitz Gun Polish Kit:

For General Firearm Surfaces our Flitz Firearm Polish Kit will also remove superfical rust and discoloration without harming the blueing. You can also polish your knife collection. How to Polish Stainless Steel Gun is as easy as 1-2-3 as outlined below.

Easy To Use:

  1. Apply Polish Paste
  2. Do Not Let Dry
  3. Buff Polish with microfiber cloth or felt polishing bit

Flitz is good for both knife and gun care. Great kit, for cleaning, polishing, and protecting against rust and corrosion. If you spend good money on a knife or gun, it makes sense to take good care of them. Excellent kit for use on blued, nickel and stainless guns. The cleaner works very well, and the polish is a great polish and brings an excellent shine.

Overall Customer Rating of 85 Reviews:

Everything Included and Solved My Issue

Rating:
Pros:
Cons:
Before using this kit, when shooting dirty Blazer ammo I had to clean my feed ramp every three mag’s or I’d get a failure to feed. After 100 light strokes with the 1200 grit and polishing to a mirror finish, I had no failures after 9 rounds of Hornady Critical Defense and 111 rounds of the Blazer.

UT

PMR30 Ramp Polishing Kit

Rating:
Pros:
Cons:
I just used the ramp polishing kit and my Dremel Tool to polish the upgrade, stainless steel feeding ramp. It worked great! Beyond my expectations. Within ten minutes I had the ramp looking like a stainless steel mirror. I would recommend that you use your Dremel tool at about 1/3 to 1/2 speed. Full speed seems to burn up the polishing compound and heats up the ramp too quickly. You won't regret using this kit.

Fixed the FTF issue

Rating:
Pros:
Cons:
I purchased the feed ramp polishing kit, guide rod and spring for my Carbine. FIXED the FTF issue immediately!
Now the Carbine is fun to shoot. Thank you

Georgia

Good reason for 81 five stars as I write this.

Rating:
Pros:
Cons:
This is ridiculously easy even for those of us who aren't gunsmiths by any stretch-- just follow the video. I polished the sear-trigger interface and feed ramp to a mirror-like shine for one gun, and immediately polished the ramps for 3 more. Then I noticed the bluing on one barrel was wearing. So I soaked that in vinegar for a few minutes (doesn't hurt the metal), wiped off the remainder, and polished the barrel and the recoil rod. (Coated that with TWP 25 for extra rust resistance, but really not needed if maintained since the shroud had come polished from the factory anyway.) This kit is so convenient, I just ordered another one to have on hand.

IL

Rating:
Pros:
Cons:
Excellent product. Good quality and worked as discribed

Number of questions: 0