Products 1-4 of 4
Show
Mosin Nagant 91/30 Trigger Spring Kit
(33)
Retail: $29.95
Price: $19.95
Availability: In Stock
MCARBO Item #: 200033112221 -

    Mosin Nagant 91/30 Trigger Spring Kit Custom Trigger Return Spring Custom Sear Spring Shims (2 x .011) Custom Trigger Shims (2 x .016) Heavy Duty Firing Pin Spring 550 Cord Gut (Installation Tool) Synthetic Grease w/ PTFE 1000 Grit Silicon Carbide Paper (3" x 3") One of the Best Mosin Nagant Mods you can make to improve function and reliability not to mention Reduce the Trigger Pull on your Mosin Nagant Trigger! Most complete Mosin Nagant Trigger Job available by request from the M*CARBO...

    Muzzle Lapping Kit - Silicone Carbide Lapping Compound
    (6)
    Retail: $12.95
    Price: $9.95
    Availability: In Stock
    Item #: 200033224442 -

      Barrel Muzzle Lapping Kit Includes: 1/2 oz Can of 180 Grit - Barrel Lapping Compound 45 Degree - Brass Barrel Hand Lapping Tool Silicon Carbide Barrel Lapping Compound for hand lapping rifle barrel crown. Use the 45 degree brass muzzle lapping tool with the silicon carbide lapping compound to remove the micro burrs on the end of the lands and grooves at the crown of the barrel. Brass Tool with fit a wide range of calibers from .17 to .50 cal. This bit can be turned by hand or with a hand...

      1,000 Grit Ultra Fine Silicon Carbide Sandpaper - 10 Pack
      (4)
      Retail: $1.99
      Price: $0.99
      Availability: In Stock
      Item #: 22229222522222 -

        Silicon carbide is an abrasive sharp synthetic mineral that cuts fast and smooth.  Use with water or cutting oil to reduce clogging and extend abrasive life.  Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.

        Gunsmith Bench Block
        (59)
        Price: $6.95
        Availability: In Stock
        MCARBO Item #: 200033667778 -

          Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.

          Do you have a Mosin Nagant 91/30 and an idea for New Mosin Nagant Accessories? We like to hear them! Send us an email to chris@mcarbo.com