Products 1-6 of 6
Show
Availability: IN STOCK
MCARBO
Item #: 20001122111 -
SKS Trigger Spring Kit Consists of 2 custom designed SKS Sear Springs. (2.5lb Sear Spring and 3.5lb Sear Spring) SKS Trigger Spring Kit will reduce your trigger pull from a factory 4.5lbs to a smooth 2.5lbs. The M*CARBO SKS Trigger Job is the best and fastest way to get the most performance out of your SKS. M*CARBO specializes in custom SKS parts and accessories so let us know if you have any ideas for anything new that we should create to further customize the SKS. One of the Best SKS...
Availability: IN STOCK
Item #: 22229222522222 -
Silicon carbide is an abrasive sharp synthetic mineral that cuts fast and smooth. Use with water or cutting oil to reduce clogging and extend abrasive life. Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.
Availability: IN STOCK
MCARBO
Item #: 19970200201 -
Firearm & Feed Ramp Polishing Kit includes:
1/2 oz can of Non-Abrasive Firearm Polish3 Bullet Felt Tipped Dremel Polishing Bits1 Pair of Black Nitrile Industrial Strength Gloves1 Microfiber Towel
Polishing your Feed Ramp greatly Improves feeding operations by eliminating microscopic machining lines that slow down the travel of the bullet into the chamber, thus increasing the chances of an Failure to Feed (FTF) Malfunction. Watch the video below for a "How to Polish Feed Ramp" instructions....
Availability: IN STOCK
Bore-Snake
Item #: 20003311446666 -
.30 Caliber Firearms Bore Snake Works for .308 / .30-06 / .300 / .303 & 7.62mm Works Great with MIL-SPEC CLP!This model has a 30 stamped on the brass weight Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it...
Availability: IN STOCK
MCARBO
Item #: 200033667778 -
Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.
Availability: IN STOCK
MCARBO
Item #: 19962359149 -
MCARBO MIL-SPEC CLP / Cleaner + Lubricant + Preservative / MIL-PRF-63460E Advanced Corrosion inhibitors that meet new corrosion protection requirements that exceeds the D version of MIL-PRF-63460.Military Issue CLP is for use in cleaning, lubricating and short-term preservation of both small and large caliber military weapons, operating in the temperature range of -60 to +160 °F.Superior lubrication and protection to all areas of your firearm reducing the wear and tear caused by frictionCombat...