Tikka / Sako

Tikka T3 / T3x Trigger Spring Kit The M*CARBO Tikka T3 Trigger Spring Kit will reduce your Trigger Pull from 4.5lbs to 2 lbs. It's the Best Bang for your Buck with the M*CARBO Tikka T3 Trigger...

Tikka T3 / T3x Trigger Spring Kit The M*CARBO Tikka T3 Trigger Spring Kit will reduce your Trigger Pull from 4.5lbs to 2 lbs. It's the Best Bang for your Buck with the M*CARBO Tikka T3 Trigger Adjustment!  This is your Tikka T3 Aftermarket Trigger Solution. Works with all models and calibers from the Tikka T3 Hunter to the Tikka T3 Lite Trigger Adjustment. Tikka T3 Trigger Spring Replacement will give you over a 50% trigger pull reduction that will tighten your shot groups and improve...

Gunsmith Bench Block Gunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and...

Gunsmith Bench Block Gunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wood with a Hole in it. ...

Gunsmith Shank Installation Tool Micro-Tip Flat-Head with Notch Cut to Assist with Moving Parts & Springs in Tight Spaces inside your Firearm Much needed handy tool for any Armorer's Tool Kit or...

Gunsmith Shank Installation Tool Micro-Tip Flat-Head with Notch Cut to Assist with Moving Parts & Springs in Tight Spaces inside your Firearm Much needed handy tool for any Armorer's Tool Kit or Gunsmith Tool Kit!  completely Universal Tool for hard to access parts inside Firearms and most particularly Springs in hard to access places. The Gunsmith Shank is a Spring Adjustment Tool that will be your handy assist in any tight spot you find yourself in with Gun Springs that...

Barrel Muzzle Lapping Kit Includes: 1/2oz Can of 180 Grit - Barrel Lapping Compound 45 Degree - Brass Barrel Hand Lapping Tool Silicon Carbide Barrel Lapping Compound for hand lapping rifle barrel...

Barrel Muzzle Lapping Kit Includes: 1/2oz Can of 180 Grit - Barrel Lapping Compound 45 Degree - Brass Barrel Hand Lapping Tool Silicon Carbide Barrel Lapping Compound for hand lapping rifle barrel crown. Use the 45 degree brass muzzle lapping tool with the silicon carbide lapping compound to remove the micro burrs on the end of the lands and grooves at the crown of the barrel.  Brass Tool will fit a wide range of calibers from .17 to .50 cal. This bit can be turned by hand or with a hand...

.30 Caliber Firearms Bore Snake Works for .308 / .30-06 / .300 / .303 & 7.62mm Works Great with MIL-SPEC CLP!This model has a 30 stamped on the brass weight Get the inside of your barrel clean with...

.30 Caliber Firearms Bore Snake Works for .308 / .30-06 / .300 / .303 & 7.62mm Works Great with MIL-SPEC CLP!This model has a 30 stamped on the brass weight Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it...