• Modified KEL-TEC SUB-2000 Flat Trigger Replacement
  • Flat Trigger Design allows shooter to place finger lower on trigger improving leverage and making the trigger pull feel lighter.
  • Best Trigger Option available for shooting with gloves
  • Machined 6061 Aluminum Flat Trigger will eliminate Stock Trigger Flex!
  • Tumbled Smooth & Hard Plated with Black Anodizing for Superior Strength
  • Corrects Factory SUB 2000 Trigger Problems
  • Do you want KEL-TEC to install your M*CARBO parts into your KEL-TEC Firearm?
  • Flat Trigger Upgrade provides clean & crisp trigger pull improvement
  • Functions in both the Gen 1 & Gen 2 models of the SUB-2000
  • Protected by the M*CARBO 100% Lifetime Guarantee
  • Made in the USA!
  • Fast Same Day Shipping!

Ultimate KEL-TEC SUB-2000 Flat Trigger:

  • Custom Designed & Manufactured by M*CARBO
  • Flat Trigger Profile provides a straight, flat trigger face with a curve at the bottom to insure consistent finger placement lower on the trigger.

The KEL-TEC SUB-2000 Flat Trigger won't flex or warp under rapid fire like the factory plastic trigger! The M*CARBO Flat Trigger was designed to allow the Shooter to place their finger lower on the trigger face, improving leverage and lowering the feel of the trigger pull.

The KEL-TEC SUB-2000 Flat Trigger has a flat-faced design allows the user to place their finger lower on the trigger face, improving leverage and lowering the feel of the trigger pull.  KEL-TEC SUB-2000 Flat Trigger design allows the shooter to pull straight back, making it easier to tell if you’re pulling too far to the left or right.

The KEL TEC SUB 2000 Trigger Problems have a real impact on shooter performance. The major advantage to the KEL TEC SUB-2000 Trigger Replacement is that it won’t flex like the plastic trigger. Another advantage is the wider smooth blade on the trigger with no hump in the middle or plastic ribs like the factory plastic trigger it the most ideal KEL TEC SUB 2000 Trigger Upgrade available. Most KEL-TEC SUB-2000 Trigger Problems can be resolved with a new KEL-TEC SUB-2000 Trigger. Your new M*CARBO Flat Target Trigger will allow you to perform at greater levels than previously possible with that flimsy plastic trigger.

The KEL-TEC SUB-2000 Flat Trigger by M*CARBO is CNC milled out of a block of 6061 aircraft grade aluminum, then tumbled to remove sharp corners and finally hard platted with black anodizing to give it superior strength and a premium finish. This is the Ultimate Machined Aluminum Flat Trigger for your SUB-2000 that will out last and out perform the factory plastic trigger. You will immediately notice a much smoother and crisper trigger pull with this machined aluminum flat trigger. No more flexing or jerky trigger pull.

This is one of the best trigger improvements you can make to your KEL-TEC SUB-2000 aside from the KEL-TEC SUB-2000 Trigger Spring Kit which will reduce your trigger pull from 9-10 lbs to a modified 5.25 lbs and is one of the few KEL-TEC SUB-2000 Accessories used by the KEL TEC Shooting Team! Get both to install at the same time to get the most desirable trigger pull available on the market for your KEL-TEC SUB-2000. The KEL-TEC SUB-2000 Aluminum Flat Trigger Upgrade will fit both the Gen 1 and Gen 2 models.

M*CARBO had the shooter in mind when we designed the KEL-TEC SUB 2000 Aftermarket Trigger to correct all of the factory trigger problems. Don’t’ wait any longer to upgrade your trigger with much needed aftermarket performance.

KEL-TEC SUB-2000 Owners Manual & Exploded View:

If your getting the KEL-TEC SUB-2000 Flat Trigger, then you might find the following KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project. Print or Download the SUB-2000 Trigger Spring Kit Instructions by M*CARBO.

No Hassle 100% Lifetime Guarantee on Parts & Accessories:

The KEL-TEC SUB-2000 Flat Trigger is protected by the M*CARBO No Hassle 100% Lifetime Guarantee against any product quality issues or workmanship defects. If parts fail or are deemed defective we will send you a replacement regardless.


Tested and Approved:

The KEL-TEC SUB-2000 Flat Trigger has been tested with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made KEL-TEC SUB-2000 Flat Trigger designed and manufactured by Combat Veterans.  We will donate a portion of your purchase to the Military Foundations we humbly support. 


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Installation by M*CARBO is available and recommended. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without this KEL-TEC SUB-2000 Flat Trigger. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

KEL TEC SUB-2000 Downloadable Resources

Q: Will this Trigger work for the Gen 1 or Gen 2?

A: Yes the KEl-TEC SUB-2000 Target Trigger will work for both the Generation 1 and Generation 2 models of the SUB-2000.

Q: What's the main difference between the curved trigger and the flat trigger?

A: Everyone is used to a curved trigger and they are preferred by most. Some guys have larger fingers and prefer a flat trigger to give them a more relaxed grip on the trigger. Other guys just prefer the relaxed grip of a flat trigger. The flat trigger is a fairly new design that's gaining popularity.

No Hassle M*CARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. No Hassles Ever!

We even pay return shipping and automate the return process here!

We pride ourselves in making quality parts for guys like us that appreciate great performance out of a well made firearm. So if you don't get the results you we're expecting or just don't like it. We will make it right by any means necessary. Send us an email to help@mcarbo.com We also pride ourselves in outstanding customer service so send us an email and we will show you.

Once you're part of the M*CARBO Brotherhood your not just a customer...you're a Brother! M*CARBO Brotherhood - Veterans, Police Officers and 2nd Amendment Patriots! A portion of all sales go to the Military Foundations we humbly support.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 30 Reviews:
Ocala florida

Flat trigger

Rating:
Pros:
Cons:
I had to have this upgrade love this trigger.

Which trigger?

Rating:
Pros:
Cons:
Which trigger should I get? The flat trigger or curved trigger? What are the benefits of either trigger or the differences between the two? Thanks.

Mn

Great quality!

Rating:
Pros:
Cons:
Great quality build, and feels much better then the factory trigger. Love the flat trigger!

Many Good Reasons To Install

Rating:
Pros:
Cons:
I really like this aluminum flat trigger for some good reasons. The Polymer OEM trigger is squiggly, pull it and it wiggles around at the bottom of the pull. It has a very long take up, too long.
I am 6'6" and weigh 285 Lbs, and have fingers like Shrek. I want a trigger that I can shoot with gloves, one that has enough take up that it isn't excessive but not so tight it would cause and accidental discharge putting my gloved finger in the trigger guard should the safety be off. This trigger satisfies my good reasons to install and in combination with the trigger spring upgrade makes my rifle shoot like a completely different more enjoyable firearm.

Rating:
Pros:
Cons:
top quality easy install much better then factory plastic

Number of questions: 0