Products 1-23 of 23
Show
3Pc. Punch Set - 1/16
(7)
Retail: $18.95
Price: $14.95
Availability: In Stock
Item #: 200033556667 -

    3 Piece Gun Punch Set - 1/16" - 3/32" - 1/8" Must have Armorer & Gunsmith Tools in most commonly needed sizes! One of the Essentials for your Gunsmith Tools List. These are some of the most common sizes needed for any Firearms Project. Gun Punches are a must have!Nickle Plated for Premium Rust Protection.

    Brass & Nylon Tip Armorer Hammer (3 oz)
    Retail: $19.95
    Price: $14.95
    Availability: In Stock
    MCARBO Item #: 20003311445444 -

      Brass & Nylon Tip Armorer Hammer (3 oz)Hammer Body with Knurled Grip3 oz Hammer Head with Custom Brass & Nylon Tips (1 of each) Custom 3oz Head and Custom Tips are a must have for Specialty Gun Tools! The brass head is for preventing marring of metal surfaces and for brass punches, the nylon head is non marring for all surfaces. Custom Gun Smith Tools are a must for Firearm work. Best Gun Smithing Tools and Armorer Tools for Custom Firearm Work. ...

      Muzzle Lapping Kit - Silicone Carbide Lapping Compound
      (9)
      Retail: $12.95
      Price: $9.95
      Availability: In Stock
      Gun Tools Item #: 200033224442 -

        Barrel Muzzle Lapping Kit Includes: 1/2 oz Can of 180 Grit - Barrel Lapping Compound 45 Degree - Brass Barrel Hand Lapping Tool Silicon Carbide Barrel Lapping Compound for hand lapping rifle barrel crown. Use the 45 degree brass muzzle lapping tool with the silicon carbide lapping compound to remove the micro burrs on the end of the lands and grooves at the crown of the barrel. Brass Tool with fit a wide range of calibers from .17 to .50 cal. This bit can be turned by hand or with a hand...

        Armorer Brush & Pick Kit
        Retail: $9.95
        Price: $8.95
        Availability: In Stock
        Gun Tools Item #: 20003311446555 -

          Armorer Brush & Pick Kit Includes 3 types of Gun Cleaning Brushes and 4 types of Gun Cleaning Picks! Brass, Nylon and Steel Bristle Brushes will you to go as soft or hard as you like!  Nice variety of nylon picks to clean tight spaces without damaging you surface finishes.  Add these to your Gun Cleaning Tools and make your own Gun Cleaning Kit with a wide variety of Gun Cleaning Supplies we offer.

          AR-15 Barrel Nut Thread Grease / MIL-SPEC / Aeroshell 33ms / MIL-G-21164D …
          (10)
          Retail: $12.99
          Price: $9.95
          Availability: In Stock
          MCARBO Item #: 19962358241 -

            AR-15 Barrel Nut Thread Grease Kit: 1/2oz can Aeroshell 33ms 2 black industrial grade nitrile gloves (XXL) 6” aluminum chemical applicator brush Aeroshell 33ms Resources: Aeroshell 33ms Data Sheet Aeroshell 33ms prevents the aluminum upper from welding itself to the steel barrel nut under the extreme heat and pressure of use. Barrel Nut Grease comes in a durable metal can with a threaded lid for easy application and strong defense against accidental openings. Aeroshell 33ms Barrel Nut Grease...

            1,000 Grit Ultra Fine Silicon Carbide Sandpaper - 10 Pack
            (6)
            Retail: $2.99
            Price: $1.99
            Availability: In Stock
            Item #: 22229222522222 -

              Silicon carbide is an abrasive sharp synthetic mineral that cuts fast and smooth.  Use with water or cutting oil to reduce clogging and extend abrasive life.  Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.

              9MM / .380 / .38cal / .357 Bore-Snake - Gun Barrel Cleaner
              (10)
              Retail: $9.95
              Price: $8.95
              Availability: In Stock
              Bore-Snake Item #: 22229222411111 -

                9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner.  It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels.  Solvent safe and will not deteriorate when you apply bore cleaner to it.  One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the...

                22LR / .223 / 5.56 Bore-Snake Gun Barrel Cleaner
                (3)
                Retail: $9.95
                Price: $8.95
                Availability: In Stock
                Bore-Snake Item #: 22229222422222 -

                  22LR / .223 / 5.56 Bore-Snake Gun Barrel Cleaner Universal Bore Snake that will cover your needs for a 22lr Bore Snake, 223 Bore Snake and 5.56 Bore Snake.Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated...

                  2.5mm T-Handle Hex Wrench
                  (10)
                  Price: $9.95
                  Availability: In Stock
                  Item #: 19970100103 -

                    Fastest way to remove SUB-2000 Screws by hand with the "Flywheel Effect" Bondhus 2.5mm T-Handle Hex Wrench is Made in America. Recommended for removing the 2.5mm screws on your SUB-2000. Cushioned, curved handle increases comfort and reduces fatigue. Handle is welded directly to blade for a tool that will last a lifetime. Handles are designed to match torque capacity of blade. The slight downward angle of the handles is ergonomically superior to a straight T-Handle for comfort and...

                    2.5mm Hex Keys (Set of 2)
                    (1)
                    Price: $2.95
                    Availability: In Stock
                    Item #: 19971100122 -

                      2.5mm Hex Keys for the carbon steel screw upgrade kit and carbon steel grip pin upgrade kit. Set of 2 Hex Keys.

                      Firearm & Feed Ramp Polishing Kit
                      (84)
                      Retail: $15.95
                      Price: $12.95
                      Availability: In Stock
                      MCARBO Item #: 19970200201 -

                        Firearm & Feed Ramp Polishing Kit includes: 1/2 oz can of Non-Abrasive Firearm Polish3 Bullet Felt Tipped Dremel Polishing Bits1 Pair of Black Nitrile Industrial Strength Gloves1 Microfiber Towel Polishing your Feed Ramp greatly Improves feeding operations by eliminating microscopic machining lines that slow down the travel of the bullet into the chamber, thus increasing the chances of an Failure to Feed (FTF) Malfunction. Watch the video below for a "How to Polish Feed Ramp" instructions....

                        .30 Cal .308 30-06 .300 .303 & 7.62mm Bore-Snake Gun Barrel Cleaner
                        Retail: $9.95
                        Price: $8.95
                        Availability: In Stock
                        Bore-Snake Item #: 20003311446666 -

                          .30 Caliber Firearms Bore Snake Works for .308 / .30-06 / .300 / .303 & 7.62mm Works Great with MIL-SPEC CLP!This model has a 30 stamped on the brass weight Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it...

                          12 Gauge Shotgun Bore-Snake Gun Barrel Cleaner
                          Retail: $9.95
                          Price: $8.95
                          Availability: In Stock
                          Bore-Snake Item #: 20003311446777 -

                            12 Gauge Shotgun Bore-Snake Gun Barrel Cleaner Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the bore of the barrel. One pass loosens large...

                            Bullet Shaped Felt Polishing Bits - 10 Pack
                            (5)
                            Price: $9.95
                            Availability: In Stock
                            Item #: 288811222121 -

                              10 pack - Feed Ramp Polishing Bits 1/8" Shank with 3/8" Felt Buffing Pads Rotary Tool Accessories - Bullet Shaped Feed Ramp Polishing Bits - Dremel (10 Pack). Wool Felt Point Mandrel Mounted Polishing Tool White Conical Grinding Head Rotary Accessory Kit Fit Dremel - 1/8 Inch Shank

                              Gunsmith Bench Block
                              (71)
                              Price: $6.95
                              Availability: In Stock
                              MCARBO Item #: 200033667778 -

                                Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.

                                Synthetic Grease w/ PTFE
                                (14)
                                Price: $1.95
                                Availability: In Stock
                                Item #: 19970100102 -

                                  Synthetic Multi-Purpose GreaseSuper Lube® Grease is a patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube® is compatible with most other lubricants and will not run, drip, evaporate or form gummy deposits,...

                                  Rocksett
                                  (8)
                                  Retail: $5.95
                                  Price: $2.95
                                  Availability: In Stock
                                  Item #: 3CC-Rocksett -

                                    Rocksett by Flexbar has a Temperature rating up to 1,500 degrees Fahrenheit which far exceeds that of Red or Blue Loctite.It's the Industry Standard for Muzzle Brake Applications due to the temp rating and removable strength rating similar to Blue Loctite.It's far superior to Red or Blue Loctite due to the massive 1,500 degree temperature rating, which is 3 times that of Loctite. Instructions for Using Rocksett:Rocksett is a ceramic cement (not a contact cement). You have plenty of working...

                                    SUB-2000 Collar Adhesive - Loctite 380
                                    (8)
                                    Retail: $11.95
                                    Price: $9.95
                                    Availability: In Stock
                                    Item #: 2328340 -

                                      SUB-2000 Collar Adhesive - Loctite 380 "Black Max" The Loctite 380 "Black Max" is a black, cyanoacrylate adhesive that comes in a 3 g tube. This is what KEL TEC uses from the factroy to secure the Collar to the back of the SUB-2000. You really need a strong adhesive like the Loctite 380 "Black Max" to bond the aluminum collar to the plastic trigger assembly since there are no threads for the collar to tighten up against on the firearm. The low viscosity, durable adhesive is great for a variety...

                                      Loctite Threadlocker - Blue 242 - Removable
                                      Price: $9.95
                                      Availability: In Stock
                                      Item #: 7934024200 -

                                        Loctite Threadlocker - Blue 242Great for preventing screws from backing out during shock and vibration. Ideal for firearm applications. Removable Blue Threadlocker is most ideal for keeping screws in place that may need to be removed again in the future.Recommended for most Firearm Applications Loctite Threadlocker Properties ChartTemperature rating up to 300 degreesTorque rating up to 110 in-lbsMFG# 24200.20 FL. OZ. (6ml) TubeDesigned for locking and sealing of threaded fasteners which...

                                        MCARBO MIL-SPEC CLP / MIL-PRF-63460E / Cleaner + Lubricant + Preservative
                                        (11)
                                        Price: $6.95-$12.95
                                        Availability: In Stock
                                        MCARBO Item #: 19962359149 -

                                          MCARBO MIL-SPEC CLP / Cleaner + Lubricant + Preservative / MIL-PRF-63460E Advanced Corrosion inhibitors that meet new corrosion protection requirements that exceeds the D version of MIL-PRF-63460.Military Issue CLP is for use in cleaning, lubricating and short-term preservation of both small and large caliber military weapons, operating in the temperature range of -60 to +160 °F.Superior lubrication and protection to all areas of your firearm reducing the wear and tear caused by frictionCombat...

                                          1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mm
                                          Retail: $3.95
                                          Price: $2.95
                                          Availability: In Stock
                                          MCARBO Item #: 20003311333222 -

                                            1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mmIncludes one 1/2 x 28 Crush Washer for installing Muzzle Brake, Compensator or Flash Hider Crush Washers are made from special engineered, heat treated steel that has been fine turned balanced between high spring rate and ductility to meet the function requirement of "crushed with high spring tension without cracking".This crush washer is designed for AR15 flash hider, muzzle brake or compensator installation on barrels with a 1/2x28...

                                            .22LR - 40 Cal Muzzle Brake Crush Washer
                                            Retail: $3.95
                                            Price: $2.95
                                            Availability: In Stock
                                            MCARBO Item #: 22229222377777 -

                                              .22LR - 40 Cal Muzzle Brake Crush Washer This is your Muzzle Brake Timing Crush Washer for all calibers from .22LR to 40 Cal and everything in between to include 9mm Crush Washer and 5.56 Crush Washer.

                                              12 Gauge Shotgun Crush Washer for Muzzle Brakes
                                              (2)
                                              Retail: $3.95
                                              Price: $2.95
                                              Availability: In Stock
                                              MCARBO Item #: 211105556666 -

                                                12 Gauge Shotgun Crush Washer for Muzzle Brakes Replacement Crush Washer for 12 Gauge Shotgun Muzzle Brakes.

                                                Gunsmithing Tools and Supplies Section is our List of Best Gunsmithing Tools that we think are Essential Gunsmithing Tools that make sense and are Inexpensive Gunsmithing Tools You Must Have on your Gunsmithing Tools List! Let us know if we are missing something? Send an email to chris@mcarbo.com