- Addresses factory-related issues with Metal Injection Molded (MIM) parts.
- Achieve an improved trigger reset and break angle with 33% less travel compared to the OEM Trigger.
- Boasts the shortest length of pull compared to the OEM and other aftermarket options.
- Features an over-travel set screw for fine-tuning and optimal reduction.
- Expertly CNC machined on a 5th Axis from solid 4140 steel billet—no MIM components.
- Enjoy extra smooth edges and a rounded tip for maximum comfort and to prevent trigger bite.
- Treated with a black nitride finish for lifelong durability.
- Improved finger placement, potentially making the trigger pull feel approximately 1/2lb lighter.
- Compatible with Sig Sauer P365 models: P365, P365 380, P365SAS, P365XL, P365X, and P365 X-Macro.
- NOT Compatible with California Compliant P365s that have the magazine disconnect.
- Experience a cleaner, crisper trigger pull, enhancing accuracy and overall performance.
- Do you want Us to Install the Parts and Do the Polishing Work for You?
- Having Installation Trouble? Check out these Troubleshooting Tips
- Protected by the M*CARBO 100% Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
- RED Triggers ETA Date: 1/4/2024
WHAT'S IN THE KIT:
- 1 - Precision CNC Machined Flat Trigger
- 1 - .035 Allen Key
- 1 - Black Oxide 1/8" Set Screw
Sig Sauer P365 Short Stroke Flat Trigger
This precision-engineered upgrade is CNC machined from solid 4140 steel, ensuring maximum durability and reliability. It is designed to correct common Sig Sauer P365 problems associated with MIM (Metal Injection Molded) parts, offering a significant improvement over factory components.
Experience a 33% reduction in travel over the OEM trigger, with improved reset and break angles. The Short Stroke design allows the shooter to place their finger lower on the trigger, improving leverage and creating the feel of a 1/2lb lighter trigger pull. With the included over-travel set screw, you can fine-tune your trigger to achieve maximum reduction.
This upgrade includes an extra smooth edge and rounded tip on the bottom of the trigger to prevent trigger bite. The trigger is tumbled smooth and finished with a lifetime-lasting black nitride.
We recommend installing the Sig P365 Trigger Spring Kit simultaneously for a reduced workload and an overall trigger pull reduction of up to ~40% less than the factory trigger pull. Experience an enhanced, clean, and crisp Sig P365 Trigger Pull.
Say goodbye to factory MIM parts and hello to increased reliability and performance with these precision Sig Sauer P365 accessories, designed by combat veterans. Choose the best Sig Sauer P365 upgrades for competition-level performance!
Check out this review by Dirty Civilian featuring former CAG/Delta Operator Kyle Lamb!
Sig Sauer P365 Resources:
If you're getting the Sig Sauer P365 Short Stroke Flat Trigger Upgrade, then you might find the following Sig Sauer P365 Resources useful in further enhancing your firearm. Download the Sig Sauer P365 Owners Manual or use the Sig Sauer P365 Exploded View as a Parts Diagram to plan your next firearm project.
Drop Tested and Approved:
Sig Sauer P365 Short Stroke Flat Trigger Upgrade is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The Sig Sauer P365 Short Stroke Flat Trigger Upgrade has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Sig Sauer P365 Short Stroke Flat Trigger Upgrade. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Incredible upgrade with minor fitting on 2023 365X Macro.
4.2lb repeatable pull when coupled with the spring kit. I had to do some minor fitting between the trigger bar and safety lever like another review mentioned due to the safety lever sitting proud after the install. However this let me tune the engagement to be perfectly fit for the new pre-travel (which is less than 1/3 the original.) and maintain the striker block safety. If you run into this issue and are not comfortable making the adjustments PLEASE take it to a gunsmith. My safety lever was pretty rough cut from the factory(may have been the fitment issue to begin with). Overall I am extremely happy with this trigger. Go watch the video on the install and see if you drop the safety lever at the same time they do!
Great upgrade from Sig's somewhat mushy MIM trigger
Does everything that it promises, reducing pre-travel, reducing overtravel, improving (though this is subjective) the feel of the trigger on the 365 considerably, and giving you a little bit more room for winter gloves. Note the installation is a bit trickier than most modular FCU firearms I've worked with, but that's going to be the same even if you were putting in an OEM trigger, and the installation videos are excellent. Well worth the money.
trigger doesnt work out of box
with my p365 macro it does not work out of the box (and all 365 use the same fcu), it takes up too much pre travel and causes the safety lever (part number 29 if you look at the sig gun disassembly.) it causes it to stick up too high and wont let you put your slide back on. i took it to a gun smith and they said the trigger should of been cut more on the front. Mcarbo said its sigs fault and to get there trigger to work i should shave my back plate, polish the safety lever, shave my trigger lever, or finally cut the front of the trigger which should of been cut to begin with. but if you do that it voids there warranty. so you can either void your sig warranty on your $850 gun or the warranty on a $80 trigger that said it works out of the box.
Love this trigger
The M Carbo P365 trigger is a huge improvement from OEM Sig flat trigger. The reduced take-up and geometry on the M Carbo trigger is really nice, the OEM trigger had a lot of take up and felt kinda spongy at the break. Still enough take up for a safe EDC gun, and pull weight did not change (did not install spring kit).
Perfect trigger
This trigger is all metal and reduces trigger pull significantly. Installation was a little above my gunsmithing skill level so I opted for the MCARBO installation. They did a great job and I am well pleased with the trigger. I recommend changing the springs out at the same time.
Just do it
Love this trigger. Insane improvement vs sig’s mushy oem. Super crisp break and I love quick the reset. Drastic difference to shoot with. Super smooth! Speed and follow up shots are great.
I paired with the mcarbo spring kit, mcarbo titanium striker & new stainless stryker housing/rear slide cover, and extended mag release, it’s a dream to shoot. Dpm recoil spring has it tuned to perfection. Other than a new grip module and slide, I won’t ever change a thing.
If you’re hesitating getting because of not wanting to switch out springs, the trigger is a worthy upgrade by itself.
Awesome trigger !!
So far this seems to be one of the best overall triggers I’ve had and used so far. I’ve not yet moved it over to my EDC gun yet just bc I like to get new products thru a certain amount of rounds, and/or abuse before trusting my life with it. My only hesitation was the set screw but so far it seems to be holding up just fine. Hopefully after the next trip or 2 at the range I’ll be swapping FCU’s over to my EDC, and ordering another MCarbo trigger to replace my AC skeletonized flat trigger.
Bought the red trigger
I bought the red trigger for p365. Installing took some time as I am new to this but I was very disappointed in the lack of the precision quality control as described . I had to file down 1/8” off the front of the trigger stop otherwise it wouldn’t allow the trigger bar to return enough to allow the slide lock to seat down to allow me to put the slide back on. As a novice it took me 2hrs just to figure this out and come up with a fix. I shouldn’t have to modify this like I did.
Do you have a video that addresses the install on a FCU with a manual safety?
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
mine did not, takes up too much pre tavel and leaves your saftey lever up too high and you cant put your slide on. (saftey lever is #29 if you look up a exploded parts list on sig). i took it too a gun smith and they said the front of the trigger should of been cut more. and mcarbo said its sigs fault and i should cut the back plate, or my trigger bar
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this trigger work with the 365X Macro Comp
Will this work on an FCU with a manual safety?
If I purchase this with the titanium striker kit, do you recommend I also purchase the spring kit ?
Will this work with p365 x macro tacops?
Does this work with sig p365x?
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
The P365x is the same as the XL, and all P365's are the same. All the parts work on them all the models. From the regular P365,X, XL, M-Macro
I have the p365x 9mm, it is not the xl or the macro. So your parts are not compatible for it ?
I have the p365x 9mm, it is not the xl or the macro. So your parts are not compatible for it ?
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
what about the trigger for the P365X Macro
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
Curious on if this trigger will still make the P365 drop safe?
February 11, 2023 12:27 PM
Yes! During our testing and development, we perform drop safety tests according to SAAMI Standard Z299.5 rating (12" & 48").
Does the trigger pull weight increase over the stock sig flat trigger if I use the stock springs with this trigger?
February 11, 2023 7:32 AM
Felt like maybe slightly but it was almost exactly the same.
Only thing it affected on mine was the reset.
But I have no way to measure it. Just guessing.
I still have factory springs
I have Sig Custom Works FCU. Is this trigger compatible?
Yes, all FCU are the same, just different colors
Does installation of this trigger differ when using a FCXXXXXXX custom sig works FCU?
The installation is the same for all FCU
Will the short stroke trigger work in the new xmacro? The only reason I ask is due to a fitment issue I had with a different trigger that worked fine in my xl, but when I installed it in the macro there was clearence issues to the rear. Thanks for your time.
Kraig September 16, 2022 6:43 AM
I had the same issue with my new 365 X-Macro there was not enough clearance in the rear. I tried to even to Dremel the rear or trigger so it would pass and ended up giving up and put the stock trigger back in with trigger spring kit
Answered by
Mark Dill /
April 26, 2023 12:32 PM
We have tested it in the xMacro without issue.
Is there an instruction manual on how to install the trigger?
We have a fully detailed video on how to breakdown and install the trigger on our Product Information page.
Do you ship this item to Sweden?
You can find the dealer page in our international orders, but we can only ship to specific dealers
AF&K Sport Sweden AB - Stockholm, Sweden
Anyone able to confirm this trigger and sear spring group will work in the new version P365X with manual safety?
The FCU for the 365 models are the same, the only difference is slide length and grip size of the pistols. We also have had good feed back from our 365x customers.
Is there a date of these triggers being available? Or is is it best/quickest to order and will ship when ready?
We recommend placing your order and we will ship it out as soon as possible! We are currently non-stop running these triggers in our CNC machines and are sending them out in batches to our Vendor for the surface finishing process. All backorders are being filled oldest to newest, so placing your order will keep your spot in line :) We are working as hard as we can to try to catch back up!!
If I order one on 4-13-2022 when would it ship with the back order?
we are sending out batches of machined triggers to our Second Process vendor for surface finishing on a consistent basis and will fill all backorders in the order of when they were placed! The average lead time between batches is around 3-4 weeks, depending on our vendor's lead times and shipping.
How's the trigger reach on this versus the standard curved trigger? I tried the factory flat trigger and went back to the curved because it was easier for me to reach.
The resting position of our Flat Trigger sits further back than both of the OEM triggers, with the "short-stroke" shortened pre-travel instilled in its design. This will allow you more space for your finger between the trigger and the guard and will be a much more comfortable reach. Chris does cover this in our recently uploaded video as well!
Will this retrofit into the SAS and if so, are the benefits the same?
Whaduu January 4, 2022 8:37 AM
Yes and YES! :) Our trigger has been tested and verified as compatible with the SAS models.
So if I understand,the p365 & the p250 have the same fire control module. So would this kit work in it also or am I misinformed.
December 26, 2021 6:36 AM
We have not tested our P365 Trigger in the P250 and cannot confirm it's proper fit or function in that model.
So if I understand,the p365 & the p250 have the same fire control module. So would this kit work in it also or am I misinformed.
December 26, 2021 6:35 AM
Would this work on the Sig 365 XL?
I installed it on the new P365 .380 and it works perfectly
Answered by
/
April 5, 2022 10:57 PM
Yes this trigger will fit and work in all Sig P365 models!
Yes this trigger will fit and work in all Sig P365 models!
Does this trigger reduce the pre travel of the P365 and by how much? And if it does, does the striker safety lever interfere with assembly/disassembly?
I apologize yes the set screw is to adjust over-travel. The trigger will sit at a better starting angle (right at 80 degrees) compared to Sig's MIM flat trigger (which is about 68-69 degrees), and due to this improved starting angle of the trigger face, being a short-stroke trigger, no pre-travel adjustment is available.
I thought and it appears that the set screw is used to adjust over travel since it is on the back of the trigger. Is that correct? Is there something in the design that reduces the pre travel/ takeup?
Answered by
MysterE /
December 20, 2021 2:06 PM
Yes, the set screw included is adjustable once the trigger is installed, so you can find your ideal comfort setting before adding any threadlocker locktite. The striker safety lever will not interfere.
Do these new P365 triggers take up or shorten the PRE-TRAVEL?
Mcarbo trigger breaks at 5 o'clock positon instead of 6 o'clock position.
I have already installed your Sig 365 spring kit ( and 6 of your spring kits in other guns) Nd am very pleased with all of them.
Your install videos are great. I just ordered your Sig 365 flat trigger. Do you have an install video for the trigger?
There is no video available yet, but we should have one uploaded to our YouTube Channel soon.
At what angle does the trigger break? Is it still near 90 degrees to barrel?