WHAT'S IN THE KIT:
- 1 - Lighter Custom P11 Hammer Spring
- 1 - Lighter Custom P11 Firing Pin Spring
- 1 - Lighter Custom P11 Trigger Return Spring
*Note: The Hammer Spring shown in the video is an older version. Installation is still the same the only difference on the new spring is the loops now face opposite sides.
KEL-TEC P-11 Trigger Spring Kit
The KEL-TEC P-11 Trigger Spring Kit stands out as a prime upgrade for enhancing accuracy and tightening shot groups. It is a valuable addition to your set of KEL-TEC P-11 accessories, designed to improve the firearm's reliability and performance by incorporating lighter, higher-quality springs for a smooth and consistent trigger pull. This upgrade replaces factory parts with superior aftermarket components, aiming for competition-level performance.
M*CARBO specializes in American-made KEL TEC P-11 accessories, focusing on delivering superior performance. We are open to your ideas for new KEL TEC P-11 upgrades!
This modification is aimed at providing the best KEL TEC P-11 trigger pull by reducing it by ~50%, transforming your KEL-TEC P-11 Pistol for the ultimate trigger job. Explore our custom KEL TEC P-11 9mm accessories for a remarkable trigger upgrade, designed by combat veterans for superior performance and improved reliability.
KEL-TEC P11 Resources:
If you're getting the KEL-TEC P11 Trigger Spring Kit, then you might find the following KEL-TEC P11 Resources useful in further enhancing your firearm. Download the P11 Owners Manual or use the Exploded View of the P11 Parts Diagram to plan your next firearm project.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC P-11 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
I installed the trigger spring kit, a new guide rod and 20# recoil springs. It didn't take long to install the parts and give it a cleaning. The only thing I would recommend is using a small flat screw driver to hold the firing pin in places when removing. The back side of my pin was the size of the cut out so it was smaller than the one shown in the video. This could be due to the fact that mine was made in 1996. After putting everything back together and checking function, I fire 50 rounds through it flawlessly. WOW the pull is much more smooth and the accuracy so much better. Thanks for making my P11 GREAT AGAIN.
It's a winner
Works as described. Weakens the trigger pull as described
As I was looking for a new small pocket pistol, I remembered I had this old P11 sitting in my gun case for many years because I hated the trigger and trigger pull. I ordered this spring kit and trigger and used the online video to install. The installation video was outstanding, and the gun is now excellent to shoot and carry.
Really made a difference
I installed the spring kit and guide rod on my P11, what a difference. I recommend this kit to everyone with a P11.
Kel TEC p11 trigger spring
Arrived promptly and installed with know problems after watching install videos. Night and day difference in trigger pull. Very satisfied
Kel-Tek P11 upgrades
Installed the guide rod, recoil spring, spring kit and trigger. The over travel and take up took a few minutes to work out (mine was very finicky). In the end, I had to just kiss the frame by the front of the trigger to get it to both fire and reset with every pull, every time. Very minor, and the result is a much improved trigger that should make the gun much nicer to shoot. I haven't fired it in years because I hated the trigger so much. Great value for money and the video was most helpful.
This really reduced the trigger pull on my p11. works great..
P11 spring set
Good quality spring set, easy installation, just
follow YouTube video by Mcarbo.
So the new springs face opposite directions. Contradicting the video. So which way does on orient the loops?
Can the poundage of the trigger pull be controlled when the trigger springs are changed? I would like to reduce the factory 7 lbs to 4lbs.
Will it also work for the p-40
November 19, 2022 2:54 PM
We haven't tested it on that platform; we can't recommend it if it works.