- WILL ONLY FIT THE METAL COLLAR ON THE SUB-2000! NOT FOR PLASTIC COLLAR!
- Custom KEL-TEC SUB-2000 Dual Quick Detach Sling Mount
- Dual Ambidextrous Single Point Sling Mount with QD functionality
- Machined from Lightweight Aircraft Grade Aluminum
- Attaches Directly to the Metal Collar for KEL-TEC SUB-2000
- Tumbled Smooth and Hard Plated with Black Anodizing for Maximum Strength
- SLING NOT INCLUDED
- Functions in both the Gen 1 & Gen 2 models of the SUB-2000
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
- Installs in less than 5 minutes!
- Kit Includes 7/64" Allen Key required to tighten screw.
- Recommend Loctite 380 Black
Max to properly secure collar
KEL-TEC SUB-2000 QD Single Point Sling Mount Upgrade - What's Included:
- Dual QD Single Point Sling Mount
- One 6-32 x 1/2 Black Oxide Mounting Screw
- One 7/64" Allen Key
- SLING NOT INCLUDED. SLING MOUNT ONLY
Attaches Directly to the Collar so it will only work with the Metal Collar
from KEL-TEC. Will not work with the Plastic Collar, but this one will as
it will mount to the bolt tube instead.
Introducing a high quality lightweight upgrade for your KEL-TEC SUB-2000! A must have for every SUB-2000 owner. The
KEL-TEC SUB-2000 Dual QD Single Point Sling Mount will only add just under 1/2 an ounce to your overall firearm weight
but will provide you with a rock solid ambidextrous quick detach single point sling mount for your
SUB-2000.
In keeping with the pistol caliber carbine ideology, we didn't want to overload your multi-functional folding
SUB-2000 with standard sling mount options or heavy parts made out of steel. This KEL-TEC SUB-2000 Dual QD Single
Point Sling Mount is machined out of a block of 6061 Aircraft Grade Aluminum to get the weight down and then tumbled
smooth to reduce any sharp corners. The Aluminum Single Point Sling Mount is then Hard Plated with Black Anodizing to
give it the strength of steel and a lifetime durable finish.
Kit includes 7/64" Allen Key required to tighten screw.
This Lightweight Single Point Sling Mount for your KEL-TEC SUB-2000 adds a massive amount of utility to your
SUB-2000 without limiting the form or function of the firearm, giving both left and right handed shooters a preferred
tactical quick detach sling mount option.
The M*CARBO KEL-TEC SUB-2000 Single Point Sling Mount will fit and function
properly on both the Gen 1 and Gen 2 SUB-2000!
What Gen is my SUB-2000?
KEL TEC SUB 2000 Single Point Sling Mount is one of the most universal KEL TEC SUB 2000 Accessories out there. As we
all know, the KEL TEC SUB 2000 doesn't have any sling mount options from the factory, thus making a KEL TEC SUB 2000
quick detach single point sling mount a must have. Get this aluminum KEL TEC SUB 2000 sling attachment to add a rock
solid mount for less than .5 ounces!
Any Standard QD sling will work with the Dual QD Single Point Sling Mount but we really recommend the
following:
Magpul MS4 Dual QD
Sling (Quick Detach "QD" Style
Sling)($74.95)
SMT Tactical Single Point QD Sling ($27.45)
***The QD Single Point Sling Mount will work with both types of Single Point Slings to include the Quick Detach QD
Style Slings and Hook Style Slings***
We highly recommend using Loctite
380 Black Max to properly secure your collar to the back of the trigger assembly as there are no threads but
adhesive holding it in place. Otherwise there is a chance that the collar will move unexpectedly during
operation with the QD Single Point Sling Mount.
Q: Will this Single Point Sling Mount work for the Gen 1 or Gen 2?
A: Yes the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount will work for both the Generation 1
and Generation 2 models of the SUB-2000.
Q: The collar on the back of the receiver is moving and making my sling mount move with it. What can
I do to keep it in place?
A: Apply a good amount of blue loctite onto 3-4 of the inside threads on the collar then twist it
back onto the receiver/trigger assembly. Then re-install the single point sling mount. Let it dry for 24 hours.
Q: What's the make and model of the sling pictured in your marketing photos?
A: It's a
MidwayUSA generic single point sling. Works Great! Can't beat the price.
Q: Do you know if your Kel-Tec Sub-2000 QD Single Point Sling Mount allows the carbine to be folded if a Red Lion
Precision fore end (base unit - no rails) is also installed?
A: No it will not work properly with the RLP fore end.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Dual QD Single Point Sling Mount has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
It’s ok, but…
This piece is fine but it doesn’t fit with the Kel-Tec factory installed CA-compliant fin grip. Unfortunately I didn’t realize that before I bought it. I’ll have to use a Dremel tool to shave off some of the top off of that fin grip in order to make it fit.
Ambidextrous
My wife is a lefty, and I am a righty. This QD makes it easier for us both to use a sling with the Sub 2000. It fits perfectly on the Gen 2 version. It is tough and made of metal. I get a firm click attaching the sling, and does not interfere at all with the operation of the gun.
Easy Install, Works well
What I really like about MCarbo products are the installation videos to make this an easy install. I have the older metal collar, which uses the Glock magazines, so this product worked for me and only took a few minutes to install. I also bought the Magpul sling and was able to try it out with quick attach/detach.
Easy install
Fellow KelTec enthusiasts...purchased the sling mount for my metal collar and installed it today. Fit easily over the tube cover, followed Chris' instruction video and install went easily. Purchased the sling separately, but love it and how it hangs center body, ready position. As a senior citizen, the sling will ease the carry weight of the Sub 2000 if I need to travel on foot for a distance. Great job guys.
Nice addition to my Gen 2
I like running this QD Sling mount. I favor a one-point sling and this suits me great. Weight of the gun is distrubited well for me at this point when not folded. I see guys running QD sling mounts off the M-LOK, and the bottom of the buttstock piccanty and I think it looks horrible and would never work for me at those locations. But to each his own. If it work for you it works for you, enough said. I think MCARBO hit the nail on the head with this part and it just really works well for me. I'd like to see it in a FDE finish, and I plan to paint mine in the future.
AlexN1PPHDAR
Chattanooga, TN
Perfect Solution
This qd mount works perfectly on my gen 1 sub 2k. I have struggled for years with diffirent sling mounts and this was the perfect solution. Many Thanks!
Necessary addition
If you work transitions this is required kit.
Simple to install
Use a single point sling. The original point had my 2000 barrel almost touching the ground. My wife is shorter than me and she would have to hold it up to keep it from touching the ground. This is nice, it keeps our 2000 out off the dirt and because it rides higher, it is faster and easier to get it in to position.
I have a keltec sub2k gen 2, will this work considering metal is the only option to choose
Can I order the new style single point QD sling mount that works with the Plastic collar? I can only find the old style on line
Thank you for your time
Bob
Got any plans for a sling mount for guns with the plastic collar?
Got any suggestions?
Can the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount not be used with the plastic collared models? The dropdown list only allows the selection of metal collar.
That is correct, our Dual QD is only compatible with metal collar S2Ks.