- Compatible exclusively with the METAL COLLAR of the SUB-2000; not suitable for plastic collars.
- Dual ambidextrous quick-detach sling mount.
- Crafted from lightweight aircraft-grade aluminum.
- Designed for direct attachment to the KEL-TEC SUB-2000 metal collar.
- Features a smooth finish with durable black anodizing for enhanced strength.
- Please note: The sling is not included; this is only the mount.
- Compatible with both Gen 1 & Gen 2 models of the SUB-2000.
- Quick and easy installation in under 5 minutes.
- Torque Requirement: Do not exceed 15 in*lbs while tightening the sling mount onto your Sub-2000. Over-tightening can cause damage to either your Sub-2000 or your sling mount and can possibly strip the threads of the screw.
- For optimal collar security, we recommend using Loctite 380 Black Max.
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED:
- 1 - Dual QD Single Point Sling Mount
- 1 - Black Oxide Torx Screw (See Torque Requirement info above)
- 1 - Torx L-Key
KEL-TEC SUB-2000 QD Single Point Sling Mount Upgrade
This sling mount is designed for direct attachment to the KEL-TEC's Metal Collar. Please note that it isn't compatible with the Plastic Collar. If you have a SUB-2000 with a plastic collar, check out our Single QD Single Point Sling Mount as
it will mount to the bolt tube instead.
Which Collar Do I Have?
Elevate your KEL-TEC SUB-2000 experience with this high-quality, lightweight upgrade. Essential for every SUB-2000 enthusiast, this Dual QD Single Point Sling Mount enhances your firearm without adding significant weight – just under half an ounce.
In line with the compact nature of the pistol caliber carbine, we've crafted this mount to ensure it doesn’t bulk up your versatile folding SUB-2000. Made from 6061 Aircraft Grade Aluminum, it's not just lightweight but also durable. It's meticulously smoothed to eliminate sharp edges and then hard plated with Black Anodizing to ensure a resilient finish akin to steel.
This Single Point Sling Mount offers utility without compromising the SUB-2000's design, making it an excellent choice for both left and right-handed users seeking a tactical quick detach sling mount option. It's compatible with both the Gen 1 and Gen 2 SUB-2000 models.
This sling mount stands out as one of the most adaptable KEL TEC SUB-2000 Accessories. Since the factory version of the KEL TEC SUB-2000 lacks sling mount options, our quick detach single point sling mount becomes a valuable addition. Enhance your firearm with a robust sling attachment that weighs less than half an ounce.
While the Dual QD Single Point Sling Mount is compatible with standard QD slings, we particularly recommend:
This sling mount works seamlessly with both Quick Detach QD Style Slings and Hook Style Slings.
To ensure stability and prevent unexpected movement during operation, we strongly advise using Loctite 380 Black Max to securely affix the collar to the rear of the trigger assembly. This ensures optimal performance of the QD Single Point Sling Mount.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Dual QD Single Point Sling Mount - For Metal Collar SUB-2000 has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount - For Metal Collar SUB-2000. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
I should have reviewed the video before. I would have ordered the single loop. The double is great. The installation video is right on. Only issue I had was the bolt not dropping in place. Found a Utube that resolved the issue.
Super fast install
Like the title says got it installed and tightened/thread locked in Less than 2 minutes. Don't make the mistake I made in assuming you would need their armorer's wrench to install it because you don't. Oh well that's what I get for assuming. 5/5 stars.
The single point sling mount for the Kel Tec sub 2000 is a very high quality piece. Very simple installation. The kit came with all the necessary parts
Nice
Nice addition for QD sling. Easy installation.
It’s ok, but…
This piece is fine but it doesn’t fit with the Kel-Tec factory installed CA-compliant fin grip. Unfortunately I didn’t realize that before I bought it. I’ll have to use a Dremel tool to shave off some of the top off of that fin grip in order to make it fit.
Ambidextrous
My wife is a lefty, and I am a righty. This QD makes it easier for us both to use a sling with the Sub 2000. It fits perfectly on the Gen 2 version. It is tough and made of metal. I get a firm click attaching the sling, and does not interfere at all with the operation of the gun.
Easy Install, Works well
What I really like about MCarbo products are the installation videos to make this an easy install. I have the older metal collar, which uses the Glock magazines, so this product worked for me and only took a few minutes to install. I also bought the Magpul sling and was able to try it out with quick attach/detach.
Easy install
Fellow KelTec enthusiasts...purchased the sling mount for my metal collar and installed it today. Fit easily over the tube cover, followed Chris' instruction video and install went easily. Purchased the sling separately, but love it and how it hangs center body, ready position. As a senior citizen, the sling will ease the carry weight of the Sub 2000 if I need to travel on foot for a distance. Great job guys.
Will this KEL-TEC SUB-2000 Dual QD Single Point Sling Mount - For Metal Collar SUB-2000 work on the GEN 3, which appears to have several thin, metal rings as the collar.
CSM November 30, 2024 9:01 AM
I decided to answer my own question. I ordered it taking the chance that it may not fit. I just received the Dual QD Single Point Sling Mount -For Metal Collar. I was able to install this on the GEN 3 and it tightened down nicely on the Gen 3 new collar, which is basically a series of narrow metal rings. I mounted the sling mount directly on top of them. Although the screw supplied was a shallow star screw, I was able to tighten all the way before it stripped out. Looks great and the gun operates just as before this installation. The video that MCARBO has showing the metal collar installation works for the GEN 3.
Answered by
CSM /
December 14, 2024 2:13 PM
I see someone asked this question in February but no answer so I'll ask again.
Will the dual point sling mount fit the gen 3 sub 2000?
Thanks!!
Will this fit the Gen3 Sub2000
I have a keltec sub2k gen 2, will this work considering metal is the only option to choose
Can I order the new style single point QD sling mount that works with the Plastic collar? I can only find the old style on line
Thank you for your time
Bob
Got any plans for a sling mount for guns with the plastic collar?
Got any suggestions?
Can the KEL-TEC SUB-2000 Dual QD Single Point Sling Mount not be used with the plastic collared models? The dropdown list only allows the selection of metal collar.
That is correct, our Dual QD is only compatible with metal collar S2Ks.