KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade - Precision Match Set

About This Item

KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade - Precision Match Set

• Select ONE: KEL-TEC SUB-2000 Curved Trigger OR Flat Trigger -  CNC Machined 6061 Aluminum
• Precision Match Set includes SUB-2000 Aluminum Trigger & Aluminum Trigger Guard Upgrade (Does not require additional hardware)
• Tighter Machined Tolerances that are Paired as a Match Set to provide Immediate Improvement over the factory plastic molded parts that are prone to wear extreme play/wobble.

Put a Real Aluminum Trigger on your KEL-TEC SUB-2000 that won't flex! The Factory Plastic Molded Trigger has a tendency to flex further towards the rear with each pull of the trigger. Any unnecessary flex, play or wobble in critical components such as the Trigger will reduce the Shooters ability to get the most Accuracy out of the Firearm. These Factory KEL TEC SUB 2000 Trigger Problems have a real impact on shooter performance.  This type of Plastic Trigger Flex will allow the Shooter to Over Pull on the Trigger and likely throw their shot inhibiting their ability to get the most Accuracy desired out of their SUB-2000. M*CARBO specializes in KEL TEC SUB 2000 Aftermarket Parts that solve problems!

The KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Precision Match Set is CNC Machined to Tighter Tolerances, over the Factory Plastic Molded Parts that are prone to wear and extreme play/wobble over time.  

The major advantage to the Custom KEL TEC SUB-2000 Trigger Replacement is that it won’t flex like the plastic trigger. Another advantage is the wider smooth blade on the trigger with no mold line hump in the middle like the factory plastic molded trigger.  Premium American Made KEL TEC SUB 2000 Aftermarket Accessories by M*CARBO!

**Note: The Trigger and Trigger Guard are NOT compatible with a Select Number of Gen 1 Sub-2000s that have A Cartridge Guide Located On The Chamber Face.

Do you want a Curved or Flat Trigger?
Both M*CARBO Trigger Options for your SUB-2000 are the same overall length and width.  Ultimately it comes down to where you prefer your finger placement on the Trigger. 

(1.)  If you prefer to place your finger as low as possible on the trigger to give you more leverage, then the FLAT TRIGGER is what we would recommend for you.

(2.)  If you prefer a more traditional finger placement more toward the center of the trigger, then the CURVED TRIGGER is what we would recommend for you.

M*CARBO Aluminum Trigger will allow you to perform at greater levels than previously possible with that flimsy plastic trigger making it a must have for KEL TEC SUB 2000 Mods. The Aluminum Trigger Guard offers an Extremely Durable Alternative to the Factory Plastic Trigger Guard that is primarily used as a lever to fold the SUB-2000 in half for storage.

The KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Precision Match Set by M*CARBO is CNC Machined out of a block of 6061 aircraft grade aluminum, then tumbled smooth to remove sharp corners and finally hard plated with black anodizing to give it superior strength and a premium lifetime finish. This a must have KEL TEC SUB 2000 Gen 2 Accessory that will outlast and out-perform the factory plastic molded parts. You will immediately notice a much smoother and more crisp trigger pull with this machined aluminum trigger. No more flex, wobble or jerky trigger pull after this upgrade!

This is one of the best trigger improvements you can make to your KEL-TEC SUB-2000 aside from the KEL-TEC SUB-2000 Trigger Spring Kit which will reduce your trigger pull from 9-10lbs to a modified 5.25lbs, and is one of the many KEL-TEC SUB-2000 Accessories used by the KEL TEC Shooting Team! 

Get both to install at the same time to get the most desirable trigger pull available on the market for your KEL-TEC SUB-2000. The KEL-TEC SUB-2000 Aluminum Trigger and Aluminum Trigger Guard Upgrade will fit both the Gen 1 and Gen 2 models making it a must have for both KEL TEC SUB 2000 Gen 2 Accessories and KEL TEC SUB 2000 Gen 1 Accessories.  M*CARBO had the shooter in mind when we designed the KEL-TEC SUB 2000 Aftermarket Trigger to correct all of the factory trigger problems. Don’t’ wait any longer to upgrade your trigger with these much needed aftermarket performance parts!

We highly recommend doing all of the internal upgrades at the same time while you have your SUB-2000 disassembled.  Take a look at the KEL-TEC SUB-2000 All In One Pro Performance Trigger Job Bundle to do just that!

**Note: The Trigger and Trigger Guard are NOT compatible with a Select Number of Gen 1 Sub-2000s that have A Cartridge Guide Located On The Chamber Face.

Q: Will this Trigger work for the Gen 1 or Gen 2?

A: Yes the KEL-TEC SUB-2000 Target Trigger will work for both the Generation 1 and Generation 2 models of the SUB-2000.

KEL-TEC SUB-2000 Resources:

If you're getting the KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade, then you might find the following KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.

M*CARBO No Hassle 100% Lifetime Guarantee:

The KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade - Precision Match Set is protected by the M*CARBO No Hassle 100% Lifetime Guarantee.

Tested and Approved:

The KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade - Precision Match Set has been tested repeatedly to ensure reliable operation and safety.

Veteran Owned and Operated Business:

American made KEL-TEC SUB-2000 Aluminum Trigger & Trigger Guard Upgrade - Precision Match Set is designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.