• Highest Quality American 302 Stainless Steel Spring Wire
  • Reduce Felt Recoil and Muzzle Flip!
  • Improve accuracy and overall performance
  • Functions in both the PF-9 and PF-11
  • Protected by the M*CARBO 100% Lifetime Guarantee
  • Made in the USA!
  • Fast Same Day Shipping!

KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring

  • Custom 302 Stainless Steel Spring Wire - Inner and Outer Recoil Spring

Maximum Control for your PF-9 or P-11 with this Custom Heavy Duty Recoil Spring Set. The Recoil Spring Set functions with the Stainless Guide Rods and the Plastic Factory Guide Rods. Factory spring rate is 16lbs, we offer a 20lb unit for max control to help reduce recoil and muzzle flip. Recommend using with standard velocity or high velocity ammo. KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring is a must for KEL TEC P11 Accessories or KLE TEC PF9 Upgrades.

Custom Recoil Spring will improve the KEL TEC P11 reliability and common KEL TEC P11 problems. Max Control 20lb Recoil Spring is an Excellent KEL TEC PF9 Accessory for improved function and performance! Best Choice for KEL TEC P11 9mm Accessories that install in 5mins or less!

KEL-TEC PF-9 and P-11 Owners Manual & Exploded View:

If you're getting the KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring, then you might find the following KEL-TEC PF-9 and P-11 Resources useful in further enhancing your firearm. Download the PF9 / P11 Owners Manual or use the Exploded View of the PF9 / P11 Parts Diagram to plan your next firearm project.

M*CARBO No Hassle 100% Lifetime Guarantee:

The KEL-TEC PF-9/P11 Max Control 20lb Recoil Spring is protected by the M*CARBO No Hassle 100% Lifetime Guarantee.

M*CARBO Lifetime Guarantee

Tested and Approved:

The KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring has been tested repeatedly with numerous brands of ammunition to ensure reliable operation and safety.


Veteran Owned and Operated Business:

American made KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.


ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC PF-9 / P-11 Max Control 20lb Recoil Spring. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Overall Customer Rating of 46 Reviews:
Pennsylvania

Rating:
Pros:
Cons:
Well made upgraded spring. Works very well better than stock spring. Fast shipping

Cherry on the pie

Rating:
Pros:
Cons:
Adding these springs completed the upgrade for my P11. Along with the trigger, the trigger spring kit, the stainless guide rod, and the 12 round magazine, this pistol is now fully complete and I am confident carrying this pistol every day. Don't misunderstand, my P11 was good right out of the box, however these upgrades tend to validate this weapon. It is a super sweet shooter, and really didn't cost to much, or take too long to upgrade with M*CARBO.

WV

Rating:
Pros:
Cons:
I replaced the trigger, trigger springs and guide rod in my p11 and considered each modification to be a considerable upgrade. However I was not pleased with the recoil spring kit. After reassembling the firearm with the new max control recoil springs, I could feel the coils dragging on the bottom of the barrel when working the slide by hand. The binding was severe enough that it was difficult to get the slide back far enough to lock the slide and remove the slide pin. I fired the gun and wasn’t too surprised that it malfunctioned after just a few shots. I noticed that the new spring had more side to side movement on the guide rod than the original spring and Upon measuring the outside diameter of the outer spring, found it to be .010 larger than the original. Also noticed that unlike the original spring set the new inner and outer springs were wound in the same direction allowing them to overlap and go farther off center on the guide rod which I believe added to the clearance problems I was having. I changed back to my original springs and have no more issues.

Florida

P11 Max Recoil Spring

Rating:
Pros:
Cons:
Fast shipping and worked great with the MCARBO Guide Rod

Great product

Rating:
Pros:
Cons:
Just what I expected. Made very well. Improved my pf9.

Number of questions: 0