WHAT'S IN THE KIT:
- 1 - Custom Hammer Spring
- 1 - Custom Firing Pin Spring
- 1 - Custom Trigger Return Spring
KEL-TEC PF-9 Trigger Spring Kit
Custom KEL TEC PF9 Trigger Upgrade to Reduce your PF9 Trigger Pull by nearly 50% on your KEL-TEC PF9 Pistol for the Ultimate KEL TEC PF9 Trigger Job. The KEL-TEC PF-9 Trigger Spring Kit is one of the Best KEL TEC PF9 Accessories to improve your accuracy and tighten your shot groups.
This is the best way to upgrade KEL TEC PF9 Trigger! M*CARBO specializes in American Made KEL TEC PF9 Accessories for Superior Performance! Let us know if you have any ides for New KEL TEC PF9 Upgrades!
Superior KEL TEC PF9 Mods for Best KEL TEC PF9 Trigger Pull! Custom KEL TEC PF9 Modifications to Increase Performance and Improve Reliability. KEL TEC PF9 Parts for Superior Performance by Combat Veterans!
*Caution - Factory Screws may have Loctite already applied. Be careful not to strip the screws during disassembly.*
KEL-TEC PF-9 Resources:
If you're getting the KEL-TEC PF-9 Trigger Spring Kit, then you might find the following KEL-TEC PF-9 Resources useful in further enhancing your firearm. Download the PF-9 Owners Manual or use the Exploded View of the PF-9 Parts Diagram to plan your next firearm project.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC PF9 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Trigger hammer spring kit .
Murphy's law was at work trigger pin was brutal to remove which isn't the fault of Mcarbo . Reason for four stars is I have had a few light firing pin strikes which of course led to failure to fire . Definitely a lighter trigger pull .
PF 9 Flat Trigger & Reduced Trigger Pull Spring Kit
Reduced my trigger pull from 6 pounds to 3 1/2 pounds . It still has the long Kel Tec trigger pull . Just easier .
PF9 trigger spring kit
I gave this trigger spring kit a 5 as it is everything Mcarbo say it is, I'm very impressed with ease of install and speed of which Mcarbo got this product to my front door (they shipped it the same day I ordered) and highly recommend this kit
Firing Pin Spring Foiled My Plans
I was looking forward to a full M*CARBO overhaul on my PF9. Ordered the flat trigger kit, recoil spring kit, and guide rod. Unfortunately, when I tried to install the firing spring kit, the spring diameter was too big to fit into the channel and string be compressible--it bound up in the channel. (I had thoroughly cleaned the channel prior to attempting installation, and the stock spring slips in and out without issues.) The result was that the lighter hammer spring was incompatible with the stock firing pin spring, causing a light strike misfire about every other shot. I kept the recoil springs and guide rod, and the flat trigger, and replaced the firing pin, FP spring, and hammer assembly with stock gear from KT (VASTLY less expensive than M*CARBO parts, incidentally...). So I wound up with a much nicer trigger that's still about 5 pounds, and an easier-to-run slide. Haven't been back to the range yet, but looking forward to testing the results. Disappointed that the spendy M*CARBO part didn't fit, but I'm quite happy with the guide rod and springs, and the trigger itself (if not its weight).
I should have bought these forever ago. The factory trigger was pretty terrible. Haven't gotten to the range yet, but I am certain my shots will be much more accurate since I'm not dealing with a long and heavy pull anymore. Trigger pull is now comparable to my S&W double action revolver.
Marked improvement in trigger pull
The trigger pull of my P-11 measured out at 11 pounds 7 ounces. Definitely in need of improvement. I thought I would try the MCARBO trigger spring kit. Upon receiving the kit, I found it to be of good quality - no burrs or distorted areas on the springs.
The installation process was aided by the clear and concise video provided. Well done.
This would be a great place to tie in the flat trigger installation process, there are differences in the processes and the pistol is disassembled to the required level at this point.
I did partially install the factory trigger just to see how it went, then switched to the flat trigger. The process has a difficulty rating of 3 on a scale of 5. Some care is required.
I must mention that my P-11 had a heavier trigger pull than most. The result of the installation provided a smooth trigger pull averaging 7 pounds 6 ounces. Not exactly what I had hoped for, but far better than it was!
TRIGGER SPRING KIT THE BEST MADE
I HAVE ORDERD M*CARBO PRODUCTS AND I CAN TRUEFULLY SAY THEY ARE THE BEST MADE ON THE MARKET.
Love this trigger spring
Makes the double action on my pf9 much more manageable!
Will this kit also work on the P32 & P3AT?
This is is only for the PF-9
When do you expect to have this trigger spring kit to be back in stock
Hey, Brother. This should be back in the next couple of weeks, thanks for hanging tight!