*This item will NOT work with California Complaint Sig P365 Models*
- Addresses factory-related issues with Metal Injection Molded (MIM) parts.
- Achieve an improved trigger reset and break angle with 33% less travel compared to the OEM Trigger.
- Boasts the shortest length of pull compared to the OEM and other aftermarket options.
- Features an over-travel set screw for fine-tuning and optimal reduction.
- Expertly CNC machined on a 5th Axis from solid 4140 steel billet—no MIM components.
- Enjoy extra smooth edges and a rounded tip for maximum comfort and to prevent trigger bite.
- Treated with a black nitride finish for lifelong durability.
- Improved finger placement, potentially making the trigger pull feel approximately 1/2lb lighter.
- Compatible with Sig Sauer P365 models: P365, P365 380, P365SAS, P365XL, P365X, and P365 X-Macro.
- NOT Compatible with California Compliant P365s. Due to changes made by Sig, Modification to trigger pivot pin is required for CA-Complaint Sig P365s.
- Experience a cleaner, crisper trigger pull, enhancing accuracy and overall performance.
- Do you want Us to Install the Parts and Do the Polishing Work for You?
- Having Installation Trouble? Check out these Troubleshooting Tips
- Protected by the M*CARBO 100% Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
- RED Triggers ETA Date: 2/6/2024
WHAT'S IN THE KIT:
- 1 - Precision CNC Machined Flat Trigger
- 1 - .035 Allen Key
- 1 - Black Oxide 1/8" Set Screw
Sig Sauer P365 Short Stroke Flat Trigger
This precision-engineered upgrade is CNC machined from solid 4140 steel, ensuring maximum durability and reliability. It is designed to correct common Sig Sauer P365 problems associated with MIM (Metal Injection Molded) parts, offering a significant improvement over factory components.
Experience a 33% reduction in travel over the OEM trigger, with improved reset and break angles. The Short Stroke design allows the shooter to place their finger lower on the trigger, improving leverage and creating the feel of a 1/2lb lighter trigger pull. With the included over-travel set screw, you can fine-tune your trigger to achieve maximum reduction.
This upgrade includes an extra smooth edge and rounded tip on the bottom of the trigger to prevent trigger bite. The trigger is tumbled smooth and finished with a lifetime-lasting black nitride.
We recommend installing the Sig P365 Trigger Spring Kit simultaneously for a reduced workload and an overall trigger pull reduction of up to ~40% less than the factory trigger pull. Experience an enhanced, clean, and crisp Sig P365 Trigger Pull.
Say goodbye to factory MIM parts and hello to increased reliability and performance with these precision Sig Sauer P365 accessories, designed by combat veterans. Choose the best Sig Sauer P365 upgrades for competition-level performance!
Check out this review by Dirty Civilian featuring former CAG/Delta Operator Kyle Lamb!
Sig Sauer P365 Resources:
If you're getting the Sig Sauer P365 Short Stroke Flat Trigger Upgrade, then you might find the following Sig Sauer P365 Resources useful in further enhancing your firearm. Download the Sig Sauer P365 Owners Manual or use the Sig Sauer P365 Exploded View as a Parts Diagram to plan your next firearm project.
Drop Tested and Approved:
Sig Sauer P365 Short Stroke Flat Trigger Upgrade is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The Sig Sauer P365 Short Stroke Flat Trigger Upgrade has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Sig Sauer P365 Short Stroke Flat Trigger Upgrade. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Trigger is milled wrong
After installing slide safety will not go down enough to allow the slide to be put on. Had to file the trigger down so that it would move far enough forward to allow the slide safety to drop down.
P365xmacro
You won't get it until you feel the difference. Great trigger
365 X Macro
Doesn't work in my gun. No that its been installed i can't return it based on return policy.
Trigger is out of spec - waste of $80
Trigger was out of spec. After installed, slide saftey lever doesn't completely rest flat. Had a gunsmith shave off material on the top of the trigger, he had to file off way too much just to get the slide to barely clear (still a pain in the ass to get my slide on) the saftey lever. Now the trigger sits way too far forward. Don't even bother with this trigger.
365 X Macro
Very disappointed. Everything installed just fine until the safety bar will not drop down to allow the slide to go on. Looks to me that the trigger if sat farther forward it would allow the trigger bar farther rearward in turn letting the safety bar to drop down. I suspect a geometry issue. Hopefully it will get resolved quickly
Disappointed
I had high hopes for this trigger for an sig p365 x macro. But once I put it together I couldn’t get my slide past the manual safety lever. Redid it and watched video on it and same thing. I put the factory trigger back in and the slide went right on without problem. I emailed mcarbo and never got a response
Amazing product
Very happy with all mcarbo products, I purchased this for a compensator build I'm doing and will probably purchase for my other 365 as well
Fantastic trigger
I prefer flat triggers, and the MCarbo flat face trigger is such an upgrade. Where this is my EDC, I did not upgrade the springs and kept the factory pull weight. It feels even smoother than before, which is hard to believe as it was quite smooth already, and you can dial in the amount of pre-travel, you desire. I love it!
is there a video or instructions on how to adjust the travel of the trigger using the included tools?
How do you address the issue in some FCU where the safety will not go down far enough to allow the slide to go back on. Seems to be a common problem found with a quick Google search, but the solution is not clear.
I'd like an answer for that too. Seems that the trigger needs to be farther forward to allow the trigger to be farther back allowing the safety bar to drop down. I think its a machining issue
Answered by
/
April 14, 2024 5:34 PM
any plans on making a blue version for my off duty gun. It can be my literal thin blue line, lol.
Is the gold trigger paint?
Do you foresee offering this same trigger for the CA Compliant model P365
Is the p365 trigger in gold still in the works? I saw pictures of it on the gun show almost a year ago. I think it would be a great color addition.
CSosa December 29, 2023 11:28 PM
What ever happened to the gold version coming out? I already bought a black one but, you guys teased the release MONTHS ago. I've been diligently checking and nada.
I have the 365 California edition with the magazine disconnect. If I remove the mag disconnect will this trigger fit?
December 14, 2023 12:15 AM
Looks like it may work. SigGuy did a video of him installing it.
https://www.youtube.com/watch?v=leiPOjsglb0
I would also like to know if this works.
I have the 365 California edition with the magazine disconnect. If I remove the mag disconnect will this trigger fit?
December 14, 2023 12:15 AM
Do you have a video that addresses the install on a FCU with a manual safety?
Yes, here: https://support.mcarbo.com/hc/en-us/articles/13393980419597-Sig-P365-Troubleshooting-Flat-Trigger-Install-Tips
Will this trigger work with the 365X Macro Comp
No it will not. I tried to install it on my xmacro comp. It failed for the same reasons that were put forward by Ben Bradow and Drew Almy. Do NOT buy this for the xmacro comp.
Answered by
/
December 15, 2023 9:26 AM
I had the exact same issue as Ben Bradow (answered question below and also a lengthy explanation in the review section). Mine is an X, already have this trigger installed in 2 other guns without issue. The recent recieved trigger shoe has bad geometry not allowing the safety lever to fully seat. Cannot install slide. Swapped parts out of all 3 p365s I have and same results using newest mcarbo trigger. I hope they address my issue and don’t give me the same response Ben got
Answered by
Drew Almy /
December 10, 2023 1:54 PM
Will this work on an FCU with a manual safety?
If I purchase this with the titanium striker kit, do you recommend I also purchase the spring kit ?
Yes, the trigger spring kit will the sear spring and striker safety block spring to complete the best feeling Sig P365 Trigger Job!
Will this work with p365 x macro tacops?
Does this work with sig p365x?
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
The P365x is the same as the XL, and all P365's are the same. All the parts work on them all the models. From the regular P365,X, XL, M-Macro
I have the p365x 9mm, it is not the xl or the macro. So your parts are not compatible for it ?
I have the p365x 9mm, it is not the xl or the macro. So your parts are not compatible for it ?
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
what about the trigger for the P365X Macro
Fits & Functions in Sig Sauer P365, Sig Sauer P365 380, Sig Sauer P365SAS, Sig Sauer P365XL and Sig Sauer P365 X-Macro
Curious on if this trigger will still make the P365 drop safe?
February 11, 2023 12:27 PM
Yes! During our testing and development, we perform drop safety tests according to SAAMI Standard Z299.5 rating (12" & 48").
Does the trigger pull weight increase over the stock sig flat trigger if I use the stock springs with this trigger?
February 11, 2023 7:32 AM
Felt like maybe slightly but it was almost exactly the same.
Only thing it affected on mine was the reset.
But I have no way to measure it. Just guessing.
I still have factory springs
I have Sig Custom Works FCU. Is this trigger compatible?
Yes, all FCU are the same, just different colors
Does installation of this trigger differ when using a FCXXXXXXX custom sig works FCU?
The installation is the same for all FCU
Will the short stroke trigger work in the new xmacro? The only reason I ask is due to a fitment issue I had with a different trigger that worked fine in my xl, but when I installed it in the macro there was clearence issues to the rear. Thanks for your time.
Kraig September 16, 2022 6:43 AM
I had the same issue with my new 365 X-Macro there was not enough clearance in the rear. I tried to even to Dremel the rear or trigger so it would pass and ended up giving up and put the stock trigger back in with trigger spring kit
Answered by
Mark Dill /
April 26, 2023 12:32 PM
We have tested it in the xMacro without issue.
Is there an instruction manual on how to install the trigger?
We have a fully detailed video on how to breakdown and install the trigger on our Product Information page.
Do you ship this item to Sweden?
You can find the dealer page in our international orders, but we can only ship to specific dealers
AF&K Sport Sweden AB - Stockholm, Sweden
Anyone able to confirm this trigger and sear spring group will work in the new version P365X with manual safety?
The FCU for the 365 models are the same, the only difference is slide length and grip size of the pistols. We also have had good feed back from our 365x customers.
Is there a date of these triggers being available? Or is is it best/quickest to order and will ship when ready?
We recommend placing your order and we will ship it out as soon as possible! We are currently non-stop running these triggers in our CNC machines and are sending them out in batches to our Vendor for the surface finishing process. All backorders are being filled oldest to newest, so placing your order will keep your spot in line :) We are working as hard as we can to try to catch back up!!
If I order one on 4-13-2022 when would it ship with the back order?
we are sending out batches of machined triggers to our Second Process vendor for surface finishing on a consistent basis and will fill all backorders in the order of when they were placed! The average lead time between batches is around 3-4 weeks, depending on our vendor's lead times and shipping.
How's the trigger reach on this versus the standard curved trigger? I tried the factory flat trigger and went back to the curved because it was easier for me to reach.
The resting position of our Flat Trigger sits further back than both of the OEM triggers, with the "short-stroke" shortened pre-travel instilled in its design. This will allow you more space for your finger between the trigger and the guard and will be a much more comfortable reach. Chris does cover this in our recently uploaded video as well!
Will this retrofit into the SAS and if so, are the benefits the same?
Whaduu January 4, 2022 8:37 AM
Yes and YES! :) Our trigger has been tested and verified as compatible with the SAS models.
So if I understand,the p365 & the p250 have the same fire control module. So would this kit work in it also or am I misinformed.
December 26, 2021 6:36 AM
We have not tested our P365 Trigger in the P250 and cannot confirm it's proper fit or function in that model.
So if I understand,the p365 & the p250 have the same fire control module. So would this kit work in it also or am I misinformed.
December 26, 2021 6:35 AM
Would this work on the Sig 365 XL?
I installed it on the new P365 .380 and it works perfectly
Answered by
/
April 5, 2022 10:57 PM
Yes this trigger will fit and work in all Sig P365 models!
Yes this trigger will fit and work in all Sig P365 models!
Does this trigger reduce the pre travel of the P365 and by how much? And if it does, does the striker safety lever interfere with assembly/disassembly?
I apologize yes the set screw is to adjust over-travel. The trigger will sit at a better starting angle (right at 80 degrees) compared to Sig's MIM flat trigger (which is about 68-69 degrees), and due to this improved starting angle of the trigger face, being a short-stroke trigger, no pre-travel adjustment is available.
I thought and it appears that the set screw is used to adjust over travel since it is on the back of the trigger. Is that correct? Is there something in the design that reduces the pre travel/ takeup?
Answered by
MysterE /
December 20, 2021 2:06 PM
Yes, the set screw included is adjustable once the trigger is installed, so you can find your ideal comfort setting before adding any threadlocker locktite. The striker safety lever will not interfere.
Do these new P365 triggers take up or shorten the PRE-TRAVEL?
Mcarbo trigger breaks at 5 o'clock positon instead of 6 o'clock position.
I have already installed your Sig 365 spring kit ( and 6 of your spring kits in other guns) Nd am very pleased with all of them.
Your install videos are great. I just ordered your Sig 365 flat trigger. Do you have an install video for the trigger?
There is no video available yet, but we should have one uploaded to our YouTube Channel soon.
At what angle does the trigger break? Is it still near 90 degrees to barrel?