Marlin 60 Trigger Job Bundle
  • Reduce your trigger pull from a stock 5.75 lbs to a modified 3.75 lbs
  • Ultimate Machined Aluminum Target Trigger with Pre-Travel Adjustment
  • Hyper Velocity Recoil Spring prevents damage to your buffer and receiver when shooting Hyper Velocity Ammo
  • We recommend applying Synthetic Grease w/ PTFE to the sear and hammer engagement surface to help reduce trigger pull and get optimal results from your trigger job.
  • Factory replacement E-Clips because these things are easy to lose and commonly wear out.
  • Factory replacement Recoil Spring for standard velocity ammo
  • Protected by the M*CARBO 100% Lifetime Guarantee
  • Made in the USA!
  • Fast Same Day Shipping!

Marlin 60 Trigger Job Bundle

  • Consists of 14 different parts:
  1. Hammer Spring
  2. Sear Spring
  3. Trigger Return Spring
  4. Set of 2 - Disconnector Springs
  5. Machined 6061 Aluminum Trigger w/ pre-travel adjustment
  6. Hyper Velocity Recoil Spring
  7. Standard Velocity Recoil Spring
  8. Set of 5 - E-clips
  9. Synthetic Teflon Grease

The All in One Complete Marlin 60 Trigger Job with all of our highly recommended Marlin 60 Accessories by M*CARBO! Get the most performance out of your Marlin 60 by installing all of these Marlin 60 Parts and Accessories at the same time. Reduce your Trigger Pull by nearly 40% to a crisp 3.75 lbs and replace the factory pot metal trigger with a 6061 Aircraft Grade Aluminum Marlin 60 Trigger. Get two Marlin 60 Recoil Spring options with this bundle! It's always great to have a spare and a heavy duty option if you occasionally shoot Hyper Velocity Ammo. The Marlin 60 Trigger Job Bundle includes the best of all Marlin 60 Mods M*CARBO has to offer. Plus the convenience of installing them all at once while you have your Marlin 60 Trigger Assembly opened up.

Marlin 60 Resources:

Use the following Marlin 60 Resources to further enhance your firearm. Download the Marlin 60 Owners Manual or use the Exploded View of the Marlin 60 Parts Diagram to plan your next firearm project. Print or Download the Marlin 60 Trigger Spring Kit Instructions by M*CARBO.

Marlin 60 Printable Instructions

No Hassle 100% Lifetime Guarantee:

The Marlin 60 Trigger Job Bundle is protected by the M*CARBO 100% Lifetime Guarantee. This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible.


Tested and Approved:

The Marlin 60 Trigger Job Bundle has been tested with numerous brands of ammunition to ensure reliable operation and safety.

Veteran Owned and Operated Business:

American Made Parts designed and manufactured by Combat Veterans. We donate a portion of your purchase to the Military Foundations we humbly support.

ATTENTION:

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without this Marlin 60 Trigger Job Bundle. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

No Hassle M*CARBO 100% Lifetime Guarantee - This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. No Hassles Ever!

We pride ourselves in making quality parts for guys like us that appreciate great performance out of a well made firearm. So if you don't get the results you we're expecting or just don't like it. We will make it right by any means necessary. Send us an email to help@mcarbo.com We also pride ourselves in outstanding customer service so send us an email and we will show you.

Once you're part of the M*CARBO Brotherhood your not just a customer...you're a Brother! M*CARBO Brotherhood - Veterans, Police Officers and 2nd Amendment Patriots! A portion of all sales go to the Military Foundations we humbly support.

ATTENTION: We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon my be prohibited in your state. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that my be incurred.

Overall Customer Rating of 19 Reviews:
PA

"Must Needs Upgrade"

Rating:
Pros:
Cons:
My review is similar to the other brethren. Watch video first and during the install. I purchased an older 60 for a farm varmint rifle. The OEM pull is just short of a ton. I kept checking to see if the safety was still on...Results are SWEET....NO pull. Tight groups at fifty yards offhand. I normally match ammo lots, so I bought 200 rounds of Winchester 40 grain 1280 fps Power Points. Try a BARSKA 3-9 x 32 plinker scope with a 30/30 reticle. Under $50 online. Mine was an older model AC13087. $26 at Wally World. I hand to loose the Gold bling trigger the Marlin came with but well worth it. I had only one jam with the hyper spring early on. Round 2 or 3. No issues since. The hyper spring is super tight compared to the regular. Use caution when installing as not to bend it. In short I am happy... the wood chucks are not.............Happy shooting..












The Perfect Marlin Upgrade

Rating:
Pros:
Cons:
Arrived faster than expected. I skimmed through the video and installed the parts myself in 15-20 minutes. Took it to the range the next day and couldn't believe the improvement - my Marlin 60 is now the perfect 22 rifle. Reduced the trigger pull to just the right weight and replaced the abysmal factory trigger with one that feels right.



Thanks to the improved trigger, I can now easily put all 14 rounds in a 1"x1" square from 75+ yards. Thank you MCARBO!!!

TX

Rating:
Pros:
Cons:
I have been looking at the M-Carbo trigger/spring kit for some time, and when I field stripped my Marlin 60 [circa 1998] and found the buffer in pieces; I decided it was time to buy the kit as well as a new buffer.

I watched Chris Nelson’s install video 5 times, to get a visual in my mind. When the kit arrived, I took it and my lap top out to the shop, and used the “Watch, Pause & Do” method to disassemble and reassemble the action and trigger assembly. When I completed the upgrade, everything functioned, as it should.

Yesterday, I took the Marlin 60 out to a friend’s private range for a bit of competition. I reconfirmed zero and during the check, the rifle performed without a hitch. I then shot 20rds at 50yds scoring a 199 and 16 X’s. Another 20rds at 75yds scored 195 and 6 X’s.

The new M-Carbo trigger is a gem and breaks at 3.6# per my Lyman gauge.

The overall install is not difficult, but you must follow the video to the letter. It is great when a manufacturer sells you a quality product, supplies an excellent install video, and personally follows up to be sure the install went, as it should, and all at a fair price.

Two thumbs up for M-Carbo.




Appleseed Rifleman

Rating:
Pros:
Cons:
I had my gunsmith install mcarbo springs and target trigger on my Marlin 60. My gunsmith said it is the best Model 60 trigger he’s ever felt. I took it to an Appleseed and shot 235 out of 250.

Thank you Chris.

N.C.

trigger pull

Rating:
Pros:
Cons:
I never thought that I would mess with a Marlin model 60 spring and trigger group with all the parts and springs that I saw in there, but I bought a Marlin model 60 spring and trigger bundle which was delivered very quick and watched their video and installed everything on the first try. It dropped my trigger pull from 5.5 pounds to just over 3 pounds and it's very smooth and barely any take up. The bundle does a great job.