KEL-TEC SUB-2000 Accessories

Gunsmith Shank Installation Tool This handy Gunsmith Shank Installation Tool with a Notch Cut Micro-Tip Flathead by M*CARBO is a valuable addition to any Armorer's or Gunsmith's Tool Kit. Designed...

Gunsmith Shank Installation Tool This handy Gunsmith Shank Installation Tool with a Notch Cut Micro-Tip Flathead by M*CARBO is a valuable addition to any Armorer's or Gunsmith's Tool Kit. Designed as a universal tool, it's particularly useful for reaching hard-to-access parts inside firearms, especially springs situated in tight places. The Gunsmith Shank serves as a Spring Adjustment Tool, assisting you in managing gun springs under tension in challenging areas of your firearm. It’s an...

KEL-TEC SUB-2000 Gen 2 Forend Screws Part number 210 & 211 on Exploded View ...

KEL-TEC SUB-2000 Gen 2 Forend Screws Part number 210 & 211 on Exploded View

KEL-TEC SUB-2000 Gen 2 Forend Lock Nuts Pack of 10 for Full Forend Replacement! KEL-TEC SUB-2000 Parts for the Gen 2 Forend. Part number 212 on Exploded View ...

KEL-TEC SUB-2000 Gen 2 Forend Lock Nuts Pack of 10 for Full Forend Replacement! KEL-TEC SUB-2000 Parts for the Gen 2 Forend. Part number 212 on Exploded View

KEL-TEC SUB-2000 Safety C-Clips (2 Pack) KEL-TEC SUB-2000 Safety C-Clips (2 Pack)Fits Gen 1 and Gen 2 Part number 315 on Exploded View ...

KEL-TEC SUB-2000 Safety C-Clips (2 Pack) KEL-TEC SUB-2000 Safety C-Clips (2 Pack)Fits Gen 1 and Gen 2 Part number 315 on Exploded View

2.5mm T-Handle Wrench Fastest way to remove SUB-2000 Screws by hand with the "Flywheel Effect" Bondhus 2.5mm T-Handle Hex Wrench is Made in America. Recommended for removing the 2.5mm screws on your...

2.5mm T-Handle Wrench Fastest way to remove SUB-2000 Screws by hand with the "Flywheel Effect" Bondhus 2.5mm T-Handle Hex Wrench is Made in America. Recommended for removing the 2.5mm screws on your SUB-2000. Cushioned, Ergonomic, curved handle increases comfort and reduces fatigue. Handle is welded directly to blade for a tool that will last a lifetime. Handles are designed to match torque capacity of blade. The slight downward angle of the handles is ergonomically superior to a straight...

KEL-TEC SUB-2000 Mag Catch Spring Replacement This small part is easy to lose or damage during disassembly — always good to keep a spare on hand. OEM Replacement for Part #208 on the SUB-2000...

KEL-TEC SUB-2000 Mag Catch Spring Replacement This small part is easy to lose or damage during disassembly — always good to keep a spare on hand. OEM Replacement for Part #208 on the SUB-2000 Exploded View Diagram.

2.5mm Hex Keys (Set of 2) 2.5mm Hex Keys to assist with the installation of our SUB-2000 Carbon Steel Screw Upgrade Kit and SUB-200 Carbon Steel Grip Pin Kit. Set of 2 Hex Keys. ...

2.5mm Hex Keys (Set of 2) 2.5mm Hex Keys to assist with the installation of our SUB-2000 Carbon Steel Screw Upgrade Kit and SUB-200 Carbon Steel Grip Pin Kit. Set of 2 Hex Keys.

M*CARBO 2nd Amendment Patriot T-Shirt We hold no punches, We don't Apologize for our Love of Country... We are Relentlessly Patriotic! A well regulated Militia, being necessary to the security of a...

M*CARBO 2nd Amendment Patriot T-Shirt We hold no punches, We don't Apologize for our Love of Country... We are Relentlessly Patriotic! A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. 2nd Amendment Patriots... Wear it with Pride and show them where you Stand... For America and the Freedoms Our Country was Founded On! Features: DryBlend Shirt Material - 50% Polyester/50% Cotton makes it a...

SUB-2000 Collar Adhesive - Loctite 380 "Black Max" The Loctite 380 "Black Max" is a black, cyanoacrylate adhesive that comes in a 3g tube. This is what KEL TEC uses from the factory to secure the...

SUB-2000 Collar Adhesive - Loctite 380 "Black Max" The Loctite 380 "Black Max" is a black, cyanoacrylate adhesive that comes in a 3g tube. This is what KEL TEC uses from the factory to secure the Collar to the back of the SUB-2000.  You really need a strong adhesive like the Loctite 380 "Black Max" to bond the aluminum collar to the plastic trigger assembly since there are no threads for the collar to tighten up against on the firearm. This low viscosity, durable adhesive is great for a...

Loctite Threadlocker - Blue 242 Great for preventing screws from backing out during shock and vibration. Ideal for firearm applications. Removable Blue Threadlocker is most ideal for keeping screws...

Loctite Threadlocker - Blue 242 Great for preventing screws from backing out during shock and vibration. Ideal for firearm applications. Removable Blue Threadlocker is most ideal for keeping screws in place that may need to be removed again in the future. Recommended for most Firearm Applications Loctite Threadlocker Properties Chart Temperature rating up to 300 degreesTorque rating up to 110 in-lbs MFG# 24200 .20 FL. OZ. (6ml) Tube Designed for locking and sealing of threaded fasteners which...

M*CARBO Brotherhood 2A Patriot Morale Patches Custom Embroidered High-Detail Polyester Thread Hook and Pile Adhesion 2" x 3" M*CARBO Tactical Morale Patches can be applied to Hats, Uniforms, Range...

M*CARBO Brotherhood 2A Patriot Morale Patches Custom Embroidered High-Detail Polyester Thread Hook and Pile Adhesion 2" x 3" M*CARBO Tactical Morale Patches can be applied to Hats, Uniforms, Range Bags, you name it! These Velcro-Backed Patches are the perfect way to show off your 2nd Amendment Support! ...

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Maintain the cleanliness of your barrel effortlessly with the 9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner by M*CARBO. This...

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Maintain the cleanliness of your barrel effortlessly with the 9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner by M*CARBO. This flexible cleaning device is meticulously designed to cleanse the bores of both pistol and rifle barrels, providing a solvent-safe solution that won’t deteriorate with the application of bore cleaner. Featuring a one-piece design, this bore snake integrates corrosive-resistant bronze brushes to...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging...

KEL TEC SUB-2000 Assembly Dowel - 3/8" x 8" Used to push the hammer back inside the SUB-2000 during re-assembly. The wooden Birch Dowel is nonabrasive.  Highly recommended to avoid damaging internal parts and components. We had them custom manufactured just for this application! Made in the USA!

RocksettRocksett by Flexbar has a Temperature rating of up to 1,500 degrees Fahrenheit, which far exceeds that of Red or Blue Loctite. Rocksett is the Industry Standard for Muzzle Brake...

RocksettRocksett by Flexbar has a Temperature rating of up to 1,500 degrees Fahrenheit, which far exceeds that of Red or Blue Loctite. Rocksett is the Industry Standard for Muzzle Brake Applications due to the temp rating and removable strength rating, similar to Blue Loctite. It's far superior to Red or Blue Loctite due to the massive 1,500 degree temperature rating, which is 3 times that of Loctite. Instructions for Using Rocksett: Rocksett is a ceramic cement (not a contact cement)....

1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to...

1/2 x 28 Crush Washer - .22LR / .223 / 5.56 / 9mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to fulfill the functional requirement of being crushed without cracking.Designed for the installation of AR-15 flash hiders, muzzle brakes, or compensators on barrels with 1/2x28 threading, this Crush Washer is compatible with every standard AR-15 on the market chambered in 5.56/.223. It is also suitable...

5/8 x 24 Crush Washer - 10mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to fulfill the functional...

5/8 x 24 Crush Washer - 10mm These Crush Washers are crafted from specially engineered, heat-treated steel, achieving a fine balance between high spring rate and ductility to fulfill the functional requirement of being crushed without cracking. Designed for the installation of muzzle brakes, compensators, or flash hiders on barrels with 5/8x24 threading, this Crush Washer is ideal for 10mm platforms requiring proper alignment and secure fitment. Please note: Crush Washers are intended for...