- Custom Designed Trigger Return/Sear Spring
TC Venture Trigger Spring Kit & TC Dimension Trigger Spring Kit:
One of the Best Thompson Center Venture Accessories available to improve the factory trigger. No need to spend hundreds on a TC Venture Timney Trigger when you can get a 1.5lb trigger pull with a very affordable TC Venture Trigger Replacement from M*CARBO. Custom designed Thompson Center Venture Parts and Spring Kit made from ASTM A228 Music Wire.
WILL NOT WORK WITH THE TC VENTURE II
TC Venture Accessories can take this great rifle to the next level! We're really excited about this new trigger job for the Thompson Center Venture and Thompson Center Dimension.
The Trigger Assembly is exactly the same on both the TC Venture and TC Dimension. The TC Venture Trigger Upgrade will improve accuracy and tighten up your shot groups. Remember this kit has your TC Dimension Trigger Job covered as well. You're just a few bucks and a few minutes away from a night and day improvement for your TC Dimension Trigger Upgrade. Let us know if you have any ideas for any other Thompson Center Venture Aftermarket Parts at email@example.com!
TC Venture / TC Dimension Resources:
If you're getting the TC Venture / TC Dimension Trigger Spring Kit, then you might find the following TC Venture / TC Dimension Resources useful in further enhancing your firearm. Download the TC Venture / TC Dimension Owners Manual or use the Exploded View of the TC Venture / TC Dimension Trigger Assembly Parts Diagram to plan your next firearm project. Print or Download the TC Venture / TC Dimension Trigger Spring Kit Instructions by MCARBO.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the T/C Venture & T/C Dimension Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Ok, I’m a guy and don’t always real the instructions. Since I had not worked on a venture trigger before I printed out the instruction sheet and watched the video several times. Once I got started I couldn’t believe how simple it was. Very easy to upgrade if you just take your time! I started out with a factory pull of about 4.5 pounds and after the installation, it went to just a hair over 3 pounds… just what I was looking for.
TC Venture Trigger return spring
The service, processing and shipping were all fast and efficient. The video MCARBO has out on this install was about 24 minutes long, but very well done, I had the spring installed in about 20 minutes start to finish and it works as advertised and brought the trigger break down to about 1.5 lbs. I would recommend if you have a TC Venture and you want to improve it without breaking the checkbook. If you're not familiar with firearm disassembly, consider consulting a gunsmith.
Sweet Trigger Now!
I received your TC Trigger Spring for my .204 Ruger TC Dimension in two days and did the install that night, after watching your fine instructional video on Youtube. It was really simple and straightforward. I also adjusted the over-travel and creep while the trigger was out. Adjustments are made with the two nuts on the edge of the trigger assembly. Those have a drop of glue, but it pops right off with a sharp blade.
After reassembly, it was like a brand new gun, 2 LB, 4 OZ pull with no creep or over-travel.
After I work on any rifle trigger, I always hold the gun vertical and give it a couple of good raps on the bench to be sure sear engagement holds.
This Dimension now has one sweet trigger!
I picked up a used TC Venture in 25-06 Rem. On the first trip to the range with it I found I was not happy with the weight of the trigger. It wasn't terrible, but heavier than I would have liked. After doing some searching on the internet I found MCARBO had a spring for it so I ordered one. Shipping was fast as always, install was easy and the new spring greatly improved the trigger pull. I am very happy with my purchase.
Excellent product cut trigger pull in half! Terrific installation video. I'm very happy with my purchase!
Did do much unfortunately
I used one of their springs in my browning x bolt and man what a difference. Unfortunately the same result didn't happen with this spring. The improment was from 4.4 pounds to 3.9 pounds. This is still a heavy trigger and from their video I was expecting atleast low 2lb. I'm really bummed as this trigger was alot of work to take apart as compared to some others.
T/C Venture Trigger Spring Kit
Installed spring and did a little polishing. Trigger pull was reduced from 4lbs-6ozs to 2lbs-4ozs.
Didn't like the trigger on my Venture, about the only option was to change the spring. I didn't find a after market trigger. I found the MCarbo spring and thought I would try it. The order was very fast, less than a week I had it. I watch the video on u-tube on installation which helped by putting steps in order to save me time.
The new spring made my rifle a new weapon. Shot it the next day and it great. Thank you for such an easy fix.
Can this be used with the TC venture 2?
Unfortunately, it will not be compatible for the Venture 2. It has a blade safety on that models trigger and the housings aren't quite the same.