KSG Follower Nut Tool is made from 4140 Steel (Rc 28-32) and has a Black Oxide coating. The supplied bolt is made of hardened steel and accepts a standard allen wrench.

Original Follower Nut Tool made specifically for removing the Plastic Followers in the KSG Shotgun.

As a KSG Shotgun owner you will, at some point, need to disassemble the shell tubes for either cleaning, or to replace the plastic followers. A must have for installing your KEL TEC KSG Accessories!

The tool has two specially machined notches to fit the follower nut's curved slot. To use the Follower Nut Tool you simply:

  1. The supplied bolt is inserted through the tool and into the nut's threaded center hole.
  2. After its snugged in, you can use a standard or crescent wrench to back the nut out of the shell tube with no slippage and no damage to the nut.

KEL-TEC KSG Owners Manual & Exploded View:

If your getting the KEL TEC KSG Follower Nut Tool then you might find the following KEL-TEC KSG Resources useful in further enhancing your firearm. Download the KSG Owners Manual or use the Exploded View of the KSG Parts Diagram to plan your next firearm project.

No Hassle 100% Lifetime Guarantee on Parts & Accessories:

The KEL TEC KSG Follower Nut Tool is protected by the M*CARBO No Hassle 100% Lifetime Guarantee. This means that at any time you can send it back and we will exchange it, issue a refund or assist you in any way possible. We even pay return shipping and automate the return process here!

Tested and Approved:

The KEL TEC KSG Follower Nut Tool has been tested repeatedly to ensure reliable operation and safety.

Veteran Owned and Operated Business:

American made KEL TEC KSG Follower Nut Tool is designed and manufactured by Combat Veterans. We will donate a portion of your purchase to the Military Foundations we humbly support.


You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL TEC KSG Follower Nut Tool. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Overall Customer Rating of 6 Reviews:

Must have!

I know everybody says that certain marketed products are "must haves" but this one truly is. I don't know how in the heck I would've gotten those follower nuts off without scratching them if i hadn't had this. It fits perfectly into the grooves and is simple to use. Took me all of about 10 minutes to change both followers. Excellent product.

Vancouver. Wa

A must have.

This company thinks of everything! If your going to remove your mag followers, these are a must!

Washington State

Works perfectly

I got a change to use the Follower Nut Tool today. Works just as advertised. The only thing I did different than the instructions, I used a 7/8" deep socket instead of a crescent wrench. Perfect combo.


Perfect tool for the job

This tool worked absolutely flawlessly for the follower nuts. Couldn't ask for better tool or company! Don't forget you'll be needing the mag plug wrench as well.

Tool is awsome,,but...

So I had a broken mag spring in my KSG. ( Kel-Tec sent me two new ones under warranty ,,, I think they may have issues with this) and I wanted the right tool for it. This is that tool!

However, on MY KSG after digging into it probably could have been removed with a quarter. But I did not want any issues and did not have time to cut my own.

Mcarbo shipped fast, good communication and their product is well made in the US of friggin A ... by patriots!

With there tool, SS mag followers and Kel-Tec's springs ( I wish Wolff made for the KSG) my rig is back in service and ready to defend the home front, deer hunt ... and a lot of fun.

Thank you Mcarbo!

And the stickers are way cool!!!!