KEL-TEC KSG Follower Nut Tool
KSG Follower Nut Tool is made from 4140 Steel (Rc 28-32) and has a Black Oxide coating. The supplied bolt is made of hardened steel and accepts a standard Allen Wrench.
The Only KSG Follower Nut Tool made specifically for removing the Plastic Followers in the KSG Shotgun.
As a KSG Shotgun owner you will, at some point, need to disassemble the shell tubes for either cleaning, or to replace the plastic followers. A must have for installing your KEL TEC KSG Accessories!
KSG Follower Nut Tool will allow access to the shell tubes by giving you a hex surface to attach your adjustable wrench to. The Follower Nut Tool locates into the OEM Mag Plug (part # 310) with the 4-Point Tips that mate perfectly with the machined notches in the factory Mag Plug and the included Bolt clamps them tightly together to ensure you don't damage your shotgun.
The tool has two specially machined notches to fit the follower nut's curved slot. To use the Follower Nut Tool you simply:
- The supplied bolt is inserted through the tool and into the nut's threaded center hole.
- After its snugged in, you can use an adjustable wrench to back the nut out of the shell tube with no slippage and no damage to the nut.
KEL-TEC KSG Resources:
If you're getting the KEL-TEC KSG Follower Nut Tool, then you might find the following KEL-TEC KSG Resources useful in further enhancing your firearm. Download the KSG Owners Manual or use the Exploded View of the KSG Parts Diagram to plan your next firearm project.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC KSG Follower Nut Tool. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.