CZ 75 Trigger Spring Kit

This is the second full kit I have bought and installed. Bought the full kit with the floating trigger pin for my CZ SP01 Tactical with DeCocker back in November, and I just installed the same kit in my CZ75 DA/SA SS with dual safeties. Following the video instructions step-by-step, the entire process took about one-and-a-half hours with no mishaps or dropped/lost springs. I do have a full set of roll pin punches as well as specialty punches and gunsmith, spring locating tools and micro tips which helped greatly. I also removed the extractor from the slide as well as trigger assembly from the frame and gave both the slide and frame a thorough cleaning in the same time span. One thing that helped greatly is that I clamped the frame in my rotating and tilting vise. That made it less clumsy.

Results are amazing once again!! Average SA trigger pull with five reading is 1.89lbs, and DA is now 5.89lbs. Have not taken it to the range yet but conducted a thorough function test, and everything appears to be in order. It does require at least some mechanical aptitude; the ability to memorize processes from videos as stopping and pausing to rewind and review is cumbersome; good manual dexterity; and at least the basic tools shown in the video: but it is not impossible. For tinkerers and DIY gunsmiths like me, it's a fun project with amazing results!!

I saw their video on YouTube and for the price figured I'd try them out. Took a good hour for the install, but as long as you take your time and follow the steps, it's very doable. Took the double action down to around six pounds, and the single to about two and a half. But, every once in awhile, it wouldn't reset. The trigger would stay stuck to the rear. Checked the seer cage, springs, pins, etc... But couldn't find anything out of sorts. Contacted them and they responded very quickly and sent out another kit to fix the issue. They also emailed to find out how things were working afterwards. I love that this is an American made product, run by Vets. But it's also a great product. I will be coming back for my next upgrade for sure.

This kit was is amazing and priced right, once the pistol was back together it did away with the DA/SA issues that are so common. I was glad to have the replacement roll pin for the slide. I had just over 200 rounds on the OEM pin and could see an appreciable indentation on the OEM pin. The instructional videos are great also !

Finally got the nerve up to perform surgery. Great video but uses the word "simple" much too often. I think that you do not know what that word means! Just kidding. I am very much a novice gunsmith and got the job done with a minimum of cussing and pausing and replaying the video maybe a few dozen times. I also got the free floating trigger pin and suggest that you mention that upgrade in the video. I got that part done and realized that I had reinstalled the OEM roll pin. Simple to drive that out with the new upgraded part however. I also had bought an increased power safety detent spring from another vendor and decided to swap that out at the same time since the sear cage was out. That was much more difficult than any of the other springs. Now have a stainless drop free magazine brake on order which should be a snap to install since I'm an old hand CZ surgeon now. Thanks for a great product and good instructions! Trigger operation feels great and I'm dying to get to the range!

Thanks guys, another very fine product. On my CZ, the trigger pin had the flair on the left side of the frame. The install was as per your video and the only problem I encountered was your spring install tool was a little short and more of a hindrance than help. I used my 1/16 pin punch to align and use as the pilot and that worked much easier than playing with the mini pin provided. I do like the replacement hinge pin for the trigger and the firing pin cross pin.
My CZ was a fine shooter to begin with, but, is now an excellent shooter.
Only a month earlier I installed the spring kit for the 92FS in my M9A1. You have great products. Can you build something for my Mini 14?
All my other guns have had trigger and spring upgrades. With the exception of my XD service 40 and Browning Black Label 380 (wife’s gun). Both of these are great shooters out of the box. I have a G23 with an Apex trigger kit and even then I prefer my XD over it. The only good thing I like about my 23 is the 9mm and Sig 357 conversion barrels I use with it.
Thanks again.
Bryan

Installed in 75BD Police. Installation video helpful but it's not much harder to disassemble the sear cage. Installation tool included in kit was essential. Polished internals prior to installation. Smooth 7.5lb DA pull and nice 3lb SA. Primer strikes still nice and deep. Bought a 2nd kit for the PCR I have on order.

The CZ 75 B New Edition is an excellent pistol, however I wanted a lighter trigger pull for competitions. The trigger replacement kit reduced the double action from 10.5 lb to 7.25 lb. More importantly, the single action reduced from 4.5 lb to 3.0 lb. It is a pleasure to shoot and my accuracy has improved.

it took me a while to get it done since that little firing pin lever return spring that the video warns you to be careful with since it gets lost easily, well, it got lost easily! LOL!

once I purchase another firing pin lever return spring, I completed the installation the trigger feels absolutely awesome! double action feels a lot let heavier, and single action is very good. Have not taken it to the range yet but I can easily feel the difference compared to the original springs. My SP01 tactical feels absolutely much better before the upgrades that I both from MCarbo. it is well worth the time and effort.

thank you for the great upgrades and at awesome prices!