I am not even an amateur gunsmith, guns are my hobby not a lifestyle or occupation. However I did get the M Carbo kit for my SCCY CPX2. I did not have all of the proper tools, but I did manage to change the hammer spring and the trigger return spring, without changing the firing pin spring. I thought maybe changing the firing pin spring would be kind of sketchy because it might affect the safety of the firing pin being held away from the primer should the gun be dropped. This proved ill-advised, because out of a box of 50 cartridges I had Two failures to fire, due to light primer hits. Having replaced the other two springs did result in a much lighter trigger pull, But evidently the HammerFall was much too light to overcome the standard firing pin spring. That’s two failures to fire out of 50 rounds. That’s a 4% failure rate. 4% more than I wanted. Both cartridges went off on the second strike. So definitely light strikes first time around, and I can only attribute it to the fact that I did not install the lighter firing pin spring. Otherwise this kit did everything for my gun that it was supposed to do, and is of excellent quality. When I get the proper punches I will again try to reinstall the entire kit, and then take the gun to the gun range for testing. I cannot advise just changing the springs in your EDC, Without subsequent functioning testing. It will bite you in the butt. I can recommend this kit to other SCCY Owners, but do a better job of installing the kit than I did.

Trying your product on backup EDC. Your vid on installation was thumbs up, first time on a SCCY, took maybe 35 minutes. Reduced pull by half, I’ve taken a few readings…….3.6 to 4. Have only put about 400 rounds threw it so I’ll see after a 1000 or so. So far highly recommend the kit and again👍🏻👍🏻 On video.

This kit is simple and easy to install, especially if you are following the installation video. The result is a significant reduction in trigger pull!

I had your spring kit installed by a certified gunsmith. It cost approximately $40 which I thought was a fair price. The next day I went to the indoor range I am a member at and there was a contest 10 rounds 3 yards or further. I shot @ 6 yards. One shot went through the very center of the zero on the target the other nine shots were three MOA. I got a call two days later and they said I was one of the winners. The trigger is fantastic in comparison to the original. Very shootable makes the firearm much more enjoyable to utilize.

I had your spring kit installed by a certified gunsmith. It cost approximately $40 which I thought was a fair price. The next day I went to the indoor range I am a member at and there was a contest 10 rounds 3 yards or further. I shot @ 6 yards. One shot went through the very center of the zero on the target the other nine shots were three MOA. I got a call two days later and they said I was one of the winners. The trigger is fantastic in comparison to the original. Very shootable makes the firearm much more enjoyable to utilize.

What a difference!! This actually makes the gun shootable!! Follow up shots much easier to acquire!

Watching the video it was down in 30 mins
Worked great

 

This kit, in conjunction with the step by step YouTube install video, is solid gold. I was interested in swapping frames but the Sccy website lists it as “professional gunsmith installation only”, so the thought of complete disassembly for this kit was daunting. I bought two of these kits and two brand new CPX-2s. I won’t lie, I had a TON of trouble with the first one. The frame pins just wouldn’t budge. I spray lubed, used a full sized hammered it, even froze the frame overnight. Eventually it came free, and it took all of 15 minutes to complete the kit install. The second gun from start to finish might have taken 10 minutes so I guess something freaky was going on with the polymer in the first gun. Regardless, the product and video are fantastic even for a first timer!