WHAT'S IN THE KIT:
- 1- 6061 Aluminum SCCY CPX Flat Trigger Upgrade
- 2 -1/4" Set Screws
- 2 - 3/16" Set Screws
- 1 - 1/16" Trigger Cam
- 1 - 0.050" Allen Key
SCCY Flat Trigger Upgrade CPX-1 / CPX-2 / CPX-3 / CPX-4
- Precision CNC Machined from Block of 6061 Aircraft Grade Aluminum
- Custom SCCY CPX Flat Trigger Upgrade with Short Stroke Adjustments
- Reduce Overall Pull Length by 25%
- SCCY Flat Trigger Upgrade Fits & Functions in SCCY CPX-1 / CPX-2 / CPX-3 / CPX-4
SCCY CPX Flat Trigger Profile provides a straight, flat trigger face with another angled flat at the bottom to insure consistent finger placement much lower on the trigger. SCCY Flat Trigger Upgrade Voted #1 Mod for SCCY CPX-2 9mm Accessories!
Must Have Upgrade for All Time Double Action Only Pistols like the SCCY CPX Models! Helps reduce Felt Trigger Pull Weight and Overall Length of Pull on all CPX Models.
SCCY Trigger Upgrade includes all Set-Screws necessary to Fine Tune the Short Stroke Adjustment for your CPX Pistol.
Pre-Travel and Over-Travel Distance may vary due to SCCY production tolerances / changes over time. We recommend starting with a 1/4" set screw in the front and a 3/16" set screw in the rear of the trigger to start.
Replace your Plastic SCCY CPX 2 Trigger with a CNC Machined 6061 Aircraft Grade Aluminum SCCY CPX 2 Trigger Upgrade! SCCY Trigger Upgrade designed to Fit & Function in all SCCY CPX Models.
M*CARBO Specializes in Custom SCCY CPX 2 Aftermarket Parts for Drop In Performance! Custom SCCY CPX-1 Upgrades & SCCY CPX-2 Upgrades! SCCY Flat Trigger Upgrade Fits & Functions in SCCY CPX-1 / CPX-2 / CPX-3 / CPX-4
SCCY CPX 2 & CPX 1 Resources:
If you're getting the SCCY CPX Series Flat Trigger Upgrade, then you might find the following SCCY CPX 2 & SCCY CPX 1 Resources useful in further enhancing your firearm. Download the CPX 2 and CPX 1 Owners Manual or use the SCCY CPX 2 Exploded View as a Parts Diagram to plan your next firearm project.
SCCY CPX 3 & CPX 4 Resources:
Tested and Approved:
The SCCY CPX-1 / CPX-2 / CPX-3 / CPX-4 Flat Trigger has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the SCCY CPX-1 / CPX-2 / CPX-3 / CPX-4 Flat Trigger. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Sccy flat trigger kit
Installed as video showed would not reset trigger made adjustments as told still would not reset. Ask for refund 3 times no reply
Better than the factory
Easy install the factory trigger was worn and not holding onto the trigger cam. New trigger has much better feel and has a set screw to lock it to the cam, also eliminated some of the over travel
aluminum trigger
the trigger fit very good no pinched fingers easy install not your fault but still a lousy trigger your spring kit helped alot still a crummy pull. Good install videos
Frank Lang
Hardenville,missouri
sensible improvement
Very easy install. The one thing that the video did not cover was the care needed when re-installing the frame pins to not let the safety detent pin (on the models with an external safety) fall out. Mine did and I did not fully notice, until a considerable while later in the day. The pin showed up in an odd place near where I had done the work. I reinstalled it without issue and it worked fine (wondered immediately afterward why the safety felt a little vague moving it between the two functions) both on final inspection, and at the range. Trigger is markedly improved. Feels and functions significantly better than stock.
Not usable
Trigger looks good,seems to be well made but it was much too loose on the cam bar. Trigger would wobble side to side after being installed. It would pivot on the set screw that is designed to lock it down. The side to side movement was enough for the trigger to ride the side of the opening in the frame which would cause it to hang enough to have to be pushed forward in order for it to reset. Trigger definitely has a better feel than the factory trigger and does allow more finger room inside the trigger guard. I really wanted to like it but it was just unusable in my pistol.
Sccy Trigger
I really love the feel of this trigger, now that it is installed. Installation is not a problem if your hands don't shake like mine (like a leaf in the wind....) I didn't give it 5 starts only because of the confusion of finding the right length screws for the front and rear of the trigger; the instructions detail this for you, but it is a little bit of a pain.
After adjusting the trigger screws I found that the trigger felt very good, even felt a bit (maybe 1/2 to 1 lb) lighter, and the movement was consistent with no stacking. Overall it is very much worth the installation.
Trigger CPX-3
I like the shape of the trigger but I can't get any adjustments pre or post travel.. it's good looking trigger though. I think between installing it and the spring kit they worked well together. Also I wish the videos yall had were one with a CPX-3 but everything was 1 or 2
SCCY CPX-2 flat trigger
I'm very impressed with the quality of this product and the speed of delivery. Top notch all the way.
The only thing I'd like to see changed is a way to adjust the pre-travel and over-travel by not having to change out the screws. Other than that, a top-notch product at a fair price.
My new SCCY CPX-4 has a thinner trigger than the older models. Will this trigger fit the new CPX-4?
Tadz February 15, 2023 2:28 PM
We have not tested it in the newest generation of the CPX- 4 so I can not guarantee it.
Is this a product I can install myself-not a gunsmith
If you can follow directions by watching a step by step instructional video and have the tools. You can do it. I did it
We always recommend our parts be installed by a gunsmith, but the help of our videos, and instructions a novice should be able to install just fine!