Custom Flat Ruger PC Carbine Trigger Upgrade and Ruger PC Charger Trigger Upgrade
One Trigger Compatible with both PC Carbine and PC Charger!6061 Aluminum Flat Trigger will eliminate Stock Plastic Trigger Problems!Precision CNC Machined from Billet of Aluminum, Ruger PC Carbine Fully Flat Trigger provides maximum leverage.Trigger, Overtravel Pin and Trigger Return Spring reduce pull weight by 15% without affecting trigger reset performance.Flat Trigger Upgrade provides Clean & Crisp Ruger PC Carbine Trigger Pull Improvement.Competition Ready Ruger PC Carbine Mods and Ruger PC Charger Mods for Improved Accuracy!Check out this Install Video made by one of our M*CARBO Design Engineers!
https://support.mcarbo.com/hc/...
Protected by the M*CARBO 100% Lifetime GuaranteeMade in the USA!Fast Same Day Shipping!
WHAT'S INCLUDED:
- Ruger PC Carbine/PC Charger Flat Trigger MOD-2
- Ruger PC Carbine/PC Charger Overtravel Pin
- Custom Ruger PC Carbine/PC Charger Trigger Return Spring
Ruger PC Carbine/PC Charger Flat Trigger MOD-2
The Ruger PC Carbine Trigger Upgrade has a flat-faced design which allows the Shooter to place their finger lower on the trigger face, maximizing leverage and lowering the feel of the trigger pull. Custom Ruger PC Carbine Aftermarket Accessories for Improved Accuracy and Performance!
Precision Machined 6061 Aluminum Ruger PC Charger Flat Trigger won't flex or warp under rapid fire like the factory plastic trigger! Aftermarket Aluminum Trigger Upgrade corrects Ruger PC Carbine Problems with Plastic Factory Trigger. Ruger PC Carbine Flat Trigger design allows the shooter to pull straight back, making it easier to tell if you’re pulling too far to the left or right.
Best Ruger PC Carbine Trigger Job to Replace Plastic Factory Trigger. Build a Custom Ruger PC Carbine with Ultimate Precision and Maximum Performance!
The Ruger PC Carbine Flat Trigger by M*CARBO is CNC Machined out of a billet of 6061 aircraft grade aluminum, then tumbled to remove sharp corners and finally hard plated with black anodizing to give it superior strength and a premium finish. Precision Ruger PC Carbine Parts CNC Machined in America! Best Ruger PC Carbine Aftermarket Solutions by M*CARBO!
Changes from MOD-1:
- Completely Flat Face
- Recessed Walls
- Reduced Gap with Trigger Guard
- Improved Reset Response with Custom Trigger Return Spring
- Aluminum Type 3 Anodized vs Type 2
This is the Ultimate Machined Aluminum Flat Trigger for your Ruger PC Carbine or PC Charger that will outlast and out-perform the factory plastic trigger. You will immediately notice a much smoother and more crisp trigger pull with this machined aluminum Ruger PC Carbine Flat Trigger. No more flexing or jerky trigger pull!
Ruger PC Carbine Trigger Problems have a real impact on shooter performance. The major advantage of the Aluminum Ruger PC Carbine Trigger Replacement is its custom design and premium material that won’t flex like the plastic trigger. Another advantage is the wider smooth blade on the trigger with no hump in the middle or plastic ribs like the factory plastic trigger, making it the most ideal Ruger PC Carbine Trigger Upgrade available.
Tested and Approved:
The Ruger PC Carbine/PC Charger Flat Trigger Upgrade MOD-2 has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Ruger PC Carbine/PC Charger Flat Trigger Upgrade MOD-2. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Excellent upgrade
Solid and well made. A huge upgrade from the stock plastic trigger, the difference was certainly noticable.
Flat trigger
The feel of the new FLAT is better than the stock but I was hoping to get the spring kit that is Discontinued . I do like the feel of the flat, not sure IF I would put that much money out again for one. There is a little more room for big finders. It was easy to put in with the video helping.
Very cool and inexpensive upgrade
Not to hard to install thanks yo video provided,plus I got this trigger less than a week after ordering
These guys are fantastic! Always quality products and prompt shipping. 100% pleased, Thanks!
Awesome trigger upgrade!!
I had the Mod-1 trigger that I liked. Decided to try the Mod-2 because I like the straighter trigger style and no set screw! Wow... Easy install, incredible improvement in trigger pull feel!
As always, great customer service with lightning quick shipping. M-Carbo products are always top notch craftsmanship and flawless performance.
You will love this upgrade; well worth the money!
Very nice
This is my favorite upgrade to my Ruger PC. I purchased this because I was getting all the other upgrades from MCARBO for the PC. I did not expect it would make much of a difference, but for the price I decided to try it. Let me tell you the feel is amazing allowing your finger slip right to the sweet spot on the trigger. Although I did nothing else to the trigger mechanism it feels smoother and lighter. The short reset feels great. NOTE MCARBO recommends two twists of the screw for the reset. For my gun it was one and half for it to work properly, so make sure you check before completely reassembling your gun.
Awesome trigger
This upgrade is a no brainier. Replace stock trigger with this superb smooth upgrade and shooting does improve. Highly recommend this upgrade.
Ruger PC Carbine Flat Trigger
I purchased this part and installed it in accordace with the video by the President of Mcarbo. Although it is very stylish don't let it fool you. It took me about a month to get out to the range after installation and right away problems. The weapon would only fire one round at a time while having to chamber every round.
I emailed and called Mcabro several times "NO ONE HAS REACHED OUT TO ME BY PHONE OR EMAIL". I took the gun to a gunsmith and was still having the same problem until I reinstalled the original trigger it's all working as perfectly normal as before.
The take away from this is everything that looks good/stylish is "NOT".
Does this work on both 9mm and 22 Chargers?
Does this work on both 9mm and 22 Chargers?
We have not tested this trigger in the 22 Charger, so I can not say for certain if it will or will not work.
I have the mod 1 should I upgrade to the mod 2? What are the benefits of doing so?
Burn March 13, 2023 3:48 PM
This one has a flat face compared to the older one, This one also reduces trigger pull by 15% on average.
does this mod2 trigger assembly work for a Ruger PCC40 cal?
EClark March 13, 2023 12:23 PM
Yes, it will work in the 40cal version.
I don’t see the springs that support the trigger performance on your site. Am I blindly missing them?
November 26, 2021 8:37 AM
Is there a kit with springs for a lighter trigger?
October 12, 2021 12:30 PM
Unfortunately, we have discontinued the PC Carbine Trigger Spring Kit and PC Carbine Recoil Spring due to us being unable to confirm the efficiency or safety of them in all Ruger PC Cabines.
Answered by
/
December 16, 2021 12:05 PM
Do you still offer the Trigger Spring Kit for the Ruger PC Carbine? Could not locate it in the parts or trigger spring section.
Ted S October 11, 2021 8:20 PM
Unfortunately, we have discontinued the PC Carbine Trigger Spring Kit and PC Carbine Recoil Spring. With the introduction of the PC Charger, we found Ruger also made internal adjustments to the PC Carbine. These changes created negative effects that didn’t enhance the performance or function. Since we can no longer guarantee the safety or efficacy of these parts, we have decided to discontinue these items. We apologize for any inconvenience this causes, but would rather be safe than sorry.
Answered by
/
December 16, 2021 12:04 PM