-
Allows for Fast Action Deployment from Folded SUB-2000 Configuration to Shooter Ready
Configuration!
- Quickly Deploy your KEL-TEC SUB-2000 from the Folded Position to the Un-Folded Position with the Rapid
Deployment Latch!
- Can be Operated with One Finger as opposed to the Two Finger requirement with the Factory Latch Tab
- Securely Locks and Holds SUB-2000 in Folded Configuration Better than Factory Tab
- Improved SUB-2000 Latching Tab Release for Faster Deployment and Easier Locking Operations
- A Must have Pick for KEL TEC SUB 2000 Gen 2 Upgrades!
-
Easier, Faster and Smoother to Operate over the Factory Latching Tab
- Premium Grip Texture and Rear Pull Tabs for Superior Traction and Leverage!
- SUB-2000 Rapid Deployment Latch is Oversized and More Functional than small factory latch tab
- Premium Injection Molded High Strength Polymer Construction
-
Do you want Us to Install the Parts and Do the Polishing Work for You?
- Excellent Tensile Strength, Impact Strength and Impregnated Lubricity
-
Works for Gen 2 Models of the SUB-2000 (9mm or 40Cal)
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED
- One SUB-2000 Rapid Deployment Latch
KEL-TEC SUB-2000 RDL (Rapid Deployment Latch)
- Rapidly Deploy your KEL-TEC SUB-2000 from Folded Position to Shooter Ready Position!
- Superior Design for Fast Action Release and More Secure Locking System
- Premium Injection Molded High Strength Polymer Construction
- A Must have for Custom KEL TEC SUB 2000 Accessories!
When seconds count, the RDL will ensure you can Rapidly Deploy your KEL-TEC SUB-2000 from the Stored/Folded Configuration to Shooter-Ready Unfolded Configuration! Can be easily operated with One Finger by pressing down and back on the side of the RDL. Premium Grip Texture promotes a solid and secure rear-ward pull!
Additionally the Extended Rear Pull Tabs assist the shooter with more purchase on the latch when pulling the release tab. Corrects one of the major KEL TEC SUB 2000 Gen 2 Problems with difficult unfolding operations when compared to the KEL TEC SUB 2000 Gen 1 Design.
**Fits and Functions in the Gen 2 Model KEL-TEC SUB-2000 Carbines Only (All Calibers)**
What Gen is my SUB-2000?
A must have KEL TEC SUB 2000 Gen 2 Accessory to Increase Speed when Deploying your SUB2K!
Designed and Tested Proprietary Blend Material to prevent wear to mating OEM polymer parts. Proprietary Injection Molded Polymer Material with Excellent Tensile Strength, Impact Strength and Impregnated Lubricity for less drag and superior strength in comparison to factory latching tab. Custom KEL TEC SUB 2000 Mods for Best Performance Possible!
Unfolding your KEL-TEC SUB-2000 should physically take less than 1 second to pull off. Don't take a chance you don't have to with the small factory tab. Premium Grip Texture and Rear Pull Tabs for Superior Traction and Leverage that make for a Much Faster Deployment Operation, making it a must have for KEL TEC SUB 2000 Gen 2 Mods. Don't skip this one! M*CARBO is your source for Custom KEL TEC SUB 2000 Aftermarket Accessories that take this Carbine to the Next Level!
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Rapid Deployment Latch, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 RDL (Rapid Deployment Latch) has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 RDL (Rapid Deployment Latch). Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Easy installation. Compared to stock, big difference.
If Juuuust a little taller.
I myself do not like bare pic rail so I always want unused rails covered. I have a very low profile rail cover on my top rail and it just barely keeps the factory latch from catching. I was told the mcarbo rdl is point something taller so i gave it a try and it still is just not tall enough. As far as looking better and havibg way more surface area,the video isnt joking. If you do keep yours folded and use the factoey latch quite often,yiu definately will love the difference between the factory and rhis upgrade.
Don't bother
Easy to install? Yes
Any difference in the way the gun opens when folded? Nope!!
Worth the price? Nope!!
I installed this on my sub-2000 40 cal and it mounts easy and works verry well.
would I buy it again yes.
I just picked up the sub-2000 9mm
Easy
Very easy to install and deploy.
Rdl
Makes deployment easier and faster, happy camper.
Kel tec gear
Mcarbo is always on point, all their products high quality, the customer service is out of this world, satisfied customer here….
Is this latch taller than the stock latch?
December 9, 2022 11:18 PM
Will this work on the Sub CQB?
Hi Jason! Our RDL will not work with the Sub CQB.