- 1 - Custom Lighter Sear Spring
Rossi RS22 Trigger Spring Kit
Custom Rossi RS22 Trigger Spring Kit will reduce your trigger pull from a factory 5.75lbs to a crisp 3.5lb trigger pull. Rossi RS22 trigger upgrade will improve your accuracy and tighten up shot groups! If you're looking for Rossi RS22 Accessories then you need to do the Rossi RS22 Trigger Job and feel the difference for yourself!
The Rossi RS22 Trigger Spring Kit is made from the highest quality spring steel available, right here in the USA! Reduce your Rossi RS22 Trigger Pull by nearly 40% with a Custom Rossi RS22 Trigger Job by M*CARBO! This is the best way to Improve the Rossi RS22 Trigger Pull. Custom Rossi RS22 Mods for Increased Performance and Accuracy! Aftermarket Rossi RS22 Parts by M*CARBO for Competition Level Performance!
Rossi RS22 Resources:
Use the following Rossi RS22 Resources to further enhance your firearm. Download the Rossi RS22 Owners Manual or use the Rossi RS22 Exploded View of the Rossi RS22 Parts to plan your next firearm project.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Rossi RS22 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Not worth the time to install
I've got two RS22 bought within 6 month of each other. The tock trigger pull measures almost 4.25 lbs, the MCARBO spring kit reduced the other one to right at 4lbs. When I bought mine it was $12.95, it's currently $7.28 at the price it's a fun learning experience in how to disassemble your rifle, just don't expect much reduction in trigger pull.
Trigger Spring for Rossi RS22
I don't have a trigger pull gauge , but I can feel an obvious reduction in trigger pull. The install was simple.
This spring is an improvement over the factory spring and reduced the trigger pull over 1 lb. I don’t have a gauge but can definitely feel the difference.
I did have a problem though…the spring was bent out of shape enough it rubbed causing trigger pull issues. I had to Ben the end to correct shape and lightly file the end. Worked perfect after that.
Not a crazy difference but worth it
It didn't make the hugest difference but it is definitely worth doing
No Noticeable Difference
After good experience with some there Mcarbo items I figured this was a no-brainer. I was disappointed to find that there is no noticeable difference at all. I know this because my sister has a Rossi RS22 as well so I was able to compare the factory original trigger spring with this Mcarbo upgrade side-by-side at the range. I was disappointed to find that I could to tell a difference between the factory original and this one. In addition, I had a heck of a time with this replacement. While the video instructions are clear, it missed a step that caused me to really try my patience: when you have the trigger assembly out to install this spring...make sure the safety is OFF! It was a royal pain until I did that. Combine the frustration that I had with the installation with the fact that both my sister and I found no difference between the factory trigger and the trigger after this install and I can only report disappointment. At least it works, so I have the factory original as a backup.
I had a hard time with it
I have done many small projects in gun repair, but this project taxed my level of competence. I have installed other Mcarbo springs and was pleased with the ease and results. My negative review mostly reflects my view going into this that it would be a project anyone could do, but this was not the case for me.
The written instructions were of no use to me. I suggest a complete rewrite with better diagrams. The online video was better, except I took hours to reassemble the trigger mechanism; I had fits getting the trigger lined up with the pin hole to get the pin in. It required 3 hands or some specialized clamp to push the trigger bar forward and down while I inserted the pin. The little loose pins kept falling out as I struggled aligning these parts. I spent a lot of time on my hands and knees with a magnet to find them.
On top of that, I kinked the recoil return spring on removal and had to get a new one. This was entirely my fault. I ordered a new one from Mcarbo.
On balance I would say that any improved performance is unlikely to justify my level of frustration and the time it took me to do this.
Reduced trigger pull from 8+ pounds to just less than 4 pounds
A little tricky to install--the youtube video made it possible, otherwise I'd have given up. But has improved the trigger immensely. Well worth the challenge.
Trigger spring A+
Trigger spring A+ all the way with shipping price & quality if they have I by it. Quality parts.
Will this work in a citadel trakr 22lr, I've heard they use some of the same parts?
Hi Curtis, we haven't tested our spring kit in that model specifically so we cannot guarantee. Please feel free to reach out to us at firstname.lastname@example.org if you have any more detailed questions for our techs!
will this spring work in RS22M for magnum
Will this also work on the RS22 WMR?
I am sorry to say, no only the 22lr version
Will this work for the RS22M?
no only in the 22LR versions
Will this fit a Rossi RB22?
Unfortunately we have not tested our spring kit in an RB22 and cannot confirm