KEL-TEC SUB-2000 Glock Extended Magazine Release:
- CNC Machined Delrin Acetal Extended Mag Release!
- Custom Designed & Manufactured by M*CARBO
The KEL-TEC SUB-2000 Extended Magazine Release will fit and function in both Gen 1 & Gen 2 SUB-2000 Glock Mag
configurations. The only KEL-TEC SUB-2000 Upgrade to improve mag change efficiency!
Will not work with Massachusetts preban, Not Compatible with Glock 1-2 Magazine
The Material used to create the extended mag release is Delrin Acetal, which has Excellent Tensile and Impact
Strength. We chose this material because it was less likely to wear out your Glock polymer magazines. We would have
been happy to machine this part out of aluminum, but due to the polymer Glock magazine material constraints we had to
get creative.
Another major benefit to using Delrin Acetal is that it has a natural Impregnated Lubricity that will allow
smoother magazine changes in comparison to the cheap factory injection molded plastic. Excellent textured
serrated grip on the mag
release button and rounded corners to avoid snagging and sharpness. Works perfectly on the KEL TEC SUB 2000 Glock 19
version!
Smoother and Faster Mag Changes with new the Extended Mag Release for your SUB-2000!
Q: Will this Extended Mag Release work for the Gen 1 or Gen 2?
A: The KEL-TEC SUB-2000 Glock Extended Mag Release will work for both the Generation 1 and Generation 2 models of
the SUB-2000. Keep in mind that it's designed to only work with Glock Magazines.
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Glock Extended Mag Release, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC SUB-2000 Glock Extended Magazine Release has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Glock Extended Magazine Release. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Needs an improved spring included
Im really liking the extended mag release. I got mine in the lowers upgrade kit and it says Glock on the option but I have not had any issues using other brand magazines with this release. Working just fine.
Not for lefty
Installed next time at the range. I dumped the mag every time I shot. Have to go back to factory.
NOT for left handers!
DO NOT buy this if you are left handed!
Since installing it has become an irritation. While with the stock release I would on rare occasions accidentally bump it, I learned to hold it just slightly differently and it wasn't a big issue.
Now with the extended release I am CONSTANTLY bumping it and dropping the magazine. It is in the way. I bought the kit and it was included. I wished I had never installed it.
Mcarbo should have a warning to left hander's in the product description.
What A Difference!
The Difference From Factory Stock & This .... Like Night & Day, Esp. When Wearing Gloves, Easy To Locate And Engage!
good piece with a word of caution
much better tan the stock piece but a word of caution to lefty shooters. be aware of your hand position with this piece because you are close to release with your grip and can release mag if you are careless. nothing worse than a full mag dropped in sand
Okay a real no shitter, I had some G17 mags that were older and would not mate up with the original release, I plopped this thing in and now it takes every G17 mag I have with no feed issues, pure wizardry!
Okay a real no shitter, I had some G17 mags that were older and would not mate up with the original release, I plopped this thing in and now it takes every G17 mag I have with no feed issues, pure wizardry!
As always great product,fits perfectly video makes makes installation easy.
I have purchased and installed many accessories for my sub 2000 every things been great
Thank you for your service,and great products
I have Kel Tec Sub2000 Gen2 with Multi Mag (accepts M&P mags). Can I replace its mag release with this to use with Glock 17 mags?
Sbinh April 25, 2021 8:39 PM
You would also need to change the grip frames first to work with the Glock mags.