- Precision Machined A311 Stress-proof Carbon Steel Muzzle Brake
- Muzzle Brake and Compensator Hybrid!
- Reduces Felt Recoil and Muzzle Flip
- New Style 9mm Muzzle Brake works for any 9mm barrel with 1/2"-28 threads
- 9mm Muzzle Brake comes with Crush Washer - Recommend Barrel
Jaws!
- Must have KEL TEC SUB 2000 Gen 2 Accessories! Your Threaded Barrel Wants One!
- 9mm Muzzle Brake works for any 9mm barrel with 1/2"-28 threads
- Use a standard AR-15 Armorers Tool or 3/4" Wrench to Install. Use 1 or 2 layers of masking tape if you want to
protect the brake from scratches.
- VISE AND SUB-2000 VISE JAWS REQUIRED FOR 9mm OPTION!
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
KEL-TEC SUB-2000 Muzzle Brake:
The M*CARBO KEL-TEC SUB-2000 Muzzle Brake offers maximum recoil reduction and compensation but may be too long for some (adds
approx. 1" to overall length of the firearm after subtracting the length of threads). Great for
Competition or Home Defense use.
Tools Needed: Standard AR-15 Armorers Tool or 3/4" Wrench to Install.
**Add 1 or 2 layers of masking tape if you want to protect the brake from scratches.**
**Attention!**
We've officially changed over to the New Crush Washer Style Muzzle Brake for the KEL-TEC SUB-2000. No longer
do we offer the Jam Nut Version for the 9mm Muzzle Brake. The Jam Nut Version didn't require using a vise and the
New Crush Washer Style requires you to use a Vise and Vise Jaws. Nothing changed in terms of the Muzzle Brake
Size or Style for Function, just the way it's installed on the barrel.
​
​We made this move to ensure you don't
get any exposed threads on the barrel after timing the muzzle brake which could happen with the older style Jam Nut
version. Although the older Jam Nut version didn't require special tools or a vise this new version will ensure you
get the tightest possible lock up and will not require you to use Rocksett as previously required with the Jam Nut
Version.
​
​SUB-2000
Barrel Jaws Available Here!
**WARNING!**
Do Not Install a Crush Washer Style Muzzle Brake onto your KEL TEC SUB-2000 without this set of Barrel Jaws or
you will need to send back to KEL-TEC for repair of part number 102 (which is the
Plastic Hinge that houses the barrel). Improperly installing a Crush Washer Style Muzzle Brake could allow the
barrel to twist and snap the Plastic Hinge which houses the barrel.
DO NOT OVER-TIGHTEN MUZZLE BRAKE - WILL SNAP THREADS OFF OF BARREL!
9mm Muzzle Brakes: Come with a Crush Washer and we highly recommend getting the SUB-2000 Barrel
Jaws for compressing the SUB-2000 Barrel in your Vise. A Vise is required with the 9mm Muzzle Brake
Installation.
Precision CNC Machined KEL TEC SUB 2000 Gen 2 Muzzle Brake to allow your Carbine to Shoot Flatter under Rapid Fire.
Works for all 9mm on any pistol or rifle barrel and especially designed as the Official KEL TEC SUB 2000 Muzzle Brake.
KEL TEC SUB 2000 Muzzle Brake Reduces Felt Recoil like a Muzzle Brake and Reduces Muzzle flip like a Muzzle
Compensator.
- 9mm Muzzle Brake works for any 9mm barrel with 1/2"-28 threads
- Use a standard AR-15 Armorers Tool or 3/4" Wrench to Install. Use 1 or 2 layers of masking tape if you want to
protect the brake from scratches.
We took the best of both worlds and made our Custom Machined Precision KEL TEC SUB 2000 Muzzle Brake to
reduce felt recoil and eliminate muzzle rise to allow more stable, accurate and controllable rapid
fire!
Custom KEL TEC SUB 2000 Gen 2 Mods from M*CARBO to boost your Carbine Performance to that Next Level! Must have
KEL TEC SUB 2000 Muzzle Brake to Keep your Carbine on Target under Rapid Fire! M*CARBO Specializes in Custom KEL
TEC SUB 2000 Gen 2 Mods for Superior Performance! KEL TEC SUB 2000 Gen 2 Muzzle Brake available in 9mm
only.
Q: Will it work for the Gen 1?
A: Yes as long as it has a threaded barrel
KEL-TEC SUB-2000 Resources:
If you're getting the KEL-TEC SUB-2000 Muzzle Brake, then you might find the following
KEL-TEC SUB-2000 Resources useful in further enhancing your firearm. Download the SUB-2000 Owners Manual or use the
Exploded View of the SUB-2000 Parts Diagram to plan your next firearm project.
M*CARBO No Hassle
100% Lifetime Guarantee:
The KEL-TEC SUB-2000 Muzzle Brake is protected by the M*CARBO No Hassle 100% Lifetime Guarantee.
Tested and Approved:
The KEL-TEC SUB-2000 Muzzle Brake has been tested repeatedly to ensure reliable operation and safety.
Veteran Owned and Operated Business:
American made KEL-TEC SUB-2000 Muzzle Brake are designed and manufactured by Combat Veterans. We will donate
a portion of your purchase to the Military Foundations we humbly support.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our
inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state.
Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC SUB-2000 Muzzle Brake. Before
installing please be sure to check all local state and federal laws. By installing this part you agree to take full
responsibility for any and all legal, health and warranty consequences that may be incurred.
9 mm Muzzle Brake - Well Made & Easy to Install
The product is well made and Chris's installation video is great. The brake went on just as described. HOWEVER, I did have problem with the factory front sight moving. I checked to make sure the sight was tight before I started, as recommended in the video. But when I got to tightening the muzzle brake to time it into the correct position, the friction between the crush washer and the jam nut for the front sight was so great that as I turned the wrench on the brake, the jam nut on the sight and the sight started to move. I guess the front sight wasn't as tight as I thought. Easy fix, thought. I loosened everything, got the front sight squared up, tightened the jam nut and then left a backup wrench on the jam nut to keep it from moving while tightening and timing the muzzle break. The front sight still moved a little bit but I tapped it back into position with a rubber mallet. Now everything is tight and lined up. Easy, peasy. Also, the aluminum vise jaws worked as advertised. I had to tighten the crap out of my vise but the aluminum jaws held the barrel without a hint of movement. No scratches anywhere during the process.
Warren
Hello, the two-jaw system will not grip onto the barrel no matter how tight I clamp down with my vise, and I tried masking tape the whole bit. Actually, I cracked my vise and had to order a new one. In doing so I can't continue until it arrives. I do not like this system. Also, I'm unable time it just because it just so hard to turn the muzzle brake utilizing your jaw locking system. So, the saga will continue when I get the new vise delivered.
Perfect upgrade
These carbines don't have much recoil to begin with but this mini brake makes it even softer. They're just so much fun. It just became my daughter's(11yr) favorite range toy. MCARBO always has the perfect upgrades!
Thumbs up
T2000 muzzle brake is the only modification I made to the T2000, 9mm. Easy installation and the quality of the muzzle brake just enhance the very well made firearm. By the way, the price and customer service can't beat it. Thank you to my brother's from Mcarbo!!
Muzzle brake is good, but the supplied barrel jaw sucks
the two small jaw will not grip onto the barrel no matter how tight I clamp down with my vise, and I tried masking tape and all the different tapes I got..
I did finally managed to get the muzzle brake into position....
Bad A__
This makes the sub look BA again can’t say enough about install service I know this is a easy install but remember one price covers it all my sun was already on the schuss get it all done
Looks B.A.!
Fits perfectly, looks bad A**! Fast shipping. Another Mcarbo addition to the sub2k.
Install it EXACTLY like Chris in the video
Great addition. Last modification to my Sub 2000 that I have planned.
I watched the installation video but I only have woodworking vices. Not strong enough by a long shot. I stopped immediately when I saw the woodworking vice wasn’t going to work. Went to my neighbor’s house and used his metal vice (like the one Chris tells us to use) and it was super easy and fast. You HAVE to use a metal shop/bench vice.
Is this CA compliant? Thanks.
Yes our Muzzle Brake is a Brake/Compensator hybrid and is not a suppressor in any way. We do include these Muzzle Brakes on Cali-compliant M-Series orders! As state laws are always changing, however, we always recommend checking with your local authorities for any aftermarket upgrades if you are unsure.
why isn't the "laser cut" crush washer wrench included with the muzzle brake?
Hi Tommy, The wrench was only necessary for our old-style brakes that came with a jam nut. Our current upgraded "crush-washer" version can be installed with a standard 3/4" wrench.
What is the difference between the mini and the full size?
Does the full interfere with folding?
You can check the comparisons in the Description above! neither brake will interfere with the rifle's folding capabilities :)
Do they make a suppressor for a sub 2000.?
Hello, yes there are suppressors available out there! As long as your barrel has 1/2 x 28 threads on it, you will find one compatible for the 9mm or 40 cal. Unfortunately, we don't happen to carry them here.
I thought you had a muzzle break in .40 cal (Sub 2000 .40 cal)???? You only have it for the 9mm
Hello, if you contact us directly by phone or email, we can search your order # and provide you with an accurate update. 727-223-1816 M-F 9am-3pm or help@mcarbo.com
I ordered the m series kel-tec. How long does it take for it too come in ?
Answered by
/
July 19, 2021 9:49 PM
Hello,
Unfortunately we discontinued the 40 cal muzzle brake due to an overall lack of interest.
Please let us know if we can assist you with anything else!