-
Performance-Driven KEL-TEC P17 Aftermarket Parts for Immediate Results!
-
Custom 6061 Aircraft Grade Aluminum P17 Flat Trigger Upgrade!
- Competition Ready KEL TEC P17 Accessories for Improved Accuracy!
- Flat Trigger Upgrade provides Clean & Crisp Lighter P17 Trigger Pull Improvement
- Flat Trigger Design allows shooter to place finger lower on trigger improving leverage and making the trigger pull
feel 1/2lb lighter.
- Tumbled Smooth & Hard Plated with Black or Red Anodizing Options Available!
- Precision CNC Machined from Billet Aluminum KEL-TEC P17 Flat Trigger
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S IN THE KIT:
- Aircraft Grade Aluminum P17 Flat Trigger
KEL-TEC P17 Flat Trigger
- Flat Trigger Profile Design provides a straight, flat trigger face with a curve at the bottom to insure consistent finger placement lower on the trigger.
- Available in Black or Red Anodizing
- Custom Designed & Manufactured by M*CARBO
KEL TEC P17 Aluminum Flat Trigger Upgrade to Replace Plastic Factory Trigger! Custom KEL-TEC P17 Flat Trigger will give the shooter a more consistent and lighter trigger pull. Additionally the Flat Trigger design allows you to pull the trigger straight back consistently and makes it easier to tell if you're pulling too far left or right.
Allows you to place your finger lower on the trigger to give you more leverage and a 1/2lb trigger pull reduction. Best KEL TEC P17 Accessories for Lifetime Reliability and Functional Performance! Custom KEL TEC P17 Mods for Improved Performance and Function.
Custom 6061 Aircraft Grade Aluminum KEL TEC P17 Upgrades to replace plastic factory parts. Corrects KEL TEC P17 Problems with Plastic Factory Trigger! Get yourself a KEL TEC P17 Trigger Upgrade! Best KEL TEC P17 Aftermarket Part to Improve Reliability and Performance! Full Line-Up of Custom P17 Accessories in Production now by Combat Veterans!
Best KEL TEC P17 Aftermarket Parts to give you the Ultimate Competitive Edge! Custom KEL TEC P17 Accessories for Competition Level Performance! KEL TEC P-17 Flat Aluminum Trigger Upgrade over Plastic!
KEL-TEC P17 Resources:
If you're getting the KEL-TEC P17 Flat Trigger, then you might find the following KEL-TEC P17 Resources useful in further enhancing your firearm. Download the KEL TEC P17 Owners Manual or use the P17 Exploded View and Parts Diagram to plan your next firearm project.
Tested and Approved:
The KEL-TEC P17 Flat Trigger has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC P17 Flat Trigger. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Flat Trigger Works!
Thought I would give it a try and it has made a big difference in my point of impact. It's easier to squeeze straight back before the sear breaks.
Keltec P17 flat trigger
Arrived super fast and at a great price.
Was very easy to install after watching video..
Shoots so much better and faster than factory trigger.
Thank You and have a Great Day
Keltec P17 flat trigger
Arrived super fast and at a great price.
Was very easy to install after watching video..
Shoots so much better and faster than factory trigger.
Thank You and have a Great Day
Keltec P17 trigger
Awesome! Easy to install . Lightweight and really soft trigger pull. Wish I could have this on my browning buckmark. Thank you MCARBO for an awesome product.
The Red Trigger
It's a great trigger and a perfect fit. Watch the M*Carbo video before you start disassembly. Take your time it has a lot of loaded springs. I had one fall out and I did not see where the spring and pin came from. Got it reassembled on the 2ND try without the pin and spring. It worked fine for dry fire but when test firing it would reload 2 or 3 round and then lock open. Well, that told me where the spring and pin went and what function the worked, so I disassembled the gun again and took out the slide stop and the pin and spring went behind the slide stop and the left grip frame to hold the slide stop down and the barrel and chamber cover it from sight. A little trick I used to help hold in a few of these loaded springs is to put a small drop of Super Glue on the spring to keep them from flying away. I now have it put back together again and test fired, and the new trigger and gun work perfectly.
The Red Trigger
It's a great trigger and a perfect fit. Watch the M*Carbo video before you start disassembly. Take your time it has a lot of loaded springs. I had one fall out and I did not see where the spring and pin came from. Got it reassembled on the 2ND try without the pin and spring. It worked fine for dry fire but when test firing it would reload 2 or 3 round and then lock open. Well, that told me where the spring and pin went and what function the worked, so I disassembled the gun again and took out the slide stop and the pin and spring went behind the slide stop and the left grip frame to hold the slide stop down and the barrel and chamber cover it from sight. A little trick I used to help hold in a few of these loaded springs is to put a small drop of Super Glue on the spring to keep them from flying away. I now have it put back together again and test fired, and the new trigger and gun work perfectly.
P17 trigger
What a big difference, removing the hook, and replacing it with the high quality flat Mcarbo trigger.
stephan.patterson
Knoxville
Trigger Replacement
After watching Mcarbo's video on you tube, I ordered a trigger for my P17 and had only one problem installing. That was when I had to remove the r/s safety lever and screw. The screw was in so tight and assume lock tite was used and rounded the screw head and not able to remove it. Had to break the plastic lever and use a exacto knife in order to remove from frame . Called Kel Tec and explained to then and they sent a new set. Love Kel Tec's products and MCarbo' as well . Great folks and products from Both.
I just installed the flat trigger, and I noticed that my P-17 did not have the 3D printed part that inserts under the barrel trunion, as shown in the video. My pistol was manufactured in August of 2022. Has Kel-tec implemented another solution, or was this part left out at the factory? BTW, the trigger upgrade made a huge difference.
Kel Tec phased out the 3d printed part over time. They do not include it on the exploded diagrams anymore either. They did not provide an explanation.
After watching your video for the install of this trigger and looking at my P17 for over a month, I decided to try it. Everything went well until I attempted to remove the screw holding the right side safety. Apparently, KelTec decided to lock tite both safety screws as neither side screw would move. After stripping the head on the right side 2mm screw i decided to drill it out. Perfectly centered, good drill out procedure; used too small of a drill (#45) and left enough of the screw that it still holds just like a solid screw with lock tite! I know that you will say go to the next size up drill to eliminate more of the screw, but I'd really like to see if you've run into this before, and what you're currently doing with it
I haven't even fired this pistol yet, and the modification isn't going as planned. By the way, this is the first time ive run into a modification that isn,t going according to your instructions?????......
December 11, 2022 9:27 PM
Please contact us at Help@MCARBO.com, so a tech can help with your situation.