- Made from alloy steel.
- Effectively reduces felt recoil and muzzle flip.
- Hybrid design combining features of both muzzle brake and compensator.
- Compatible with many .40 S&W and 10mm carbines, and 350 Legend rifles.
- Fits 9/16-24 barrel threads.
- Easy installation with a standard AR-15 armorer's tool or 13/16" wrench.
- Consider using 1 or 2 layers of masking tape during installation to protect from scratching.
- Protected by the M*CARBO 100% Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED:
Smith and Wesson M&P FPC Muzzle Brake (10mm)
Warning! Avoid over-tightening to prevent snapping the barrel threads.
The M*CARBO Smith and Wesson M&P FPC Muzzle Brake (10mm Only) not only maximizes recoil reduction and compensation but also extends the firearm by approximately 1" after accounting for the thread length. Suitable for competition or home defense use.
Installation requires a standard AR-15 armorers tool or a 13/16" wrench. To prevent scratches, consider adding 1 or 2 layers of masking tape to the brake.
This muzzle brake combines the advantages of both a muzzle brake and a compensator, allowing for more stable and controllable rapid fire, keeping you on target consistently.
For optimal performance, while Rocksett is not mandatory, it is recommended due to its 1,500-degree temperature rating and removable strength properties. M*CARBO excels in producing high-quality aftermarket parts, enhancing the Smith and Wesson M&P FPC's performance.
Enhance your shooting experience by reducing both felt recoil and muzzle flip with this single upgrade. Stay tuned for more custom modifications from M*CARBO to elevate the Smith and Wesson M&P FPC factory capabilities!
Smith and Wesson M&P FPC Resources:
If you're getting the Smith and Wesson M&P FPC Muzzle Brake (10mm), then you might find the following
Smith and Wesson M&P FPC Resources useful in further enhancing your firearm. Download the FPC Owners Manual or use the
Exploded View of the M&P FPC Parts Diagram to plan your next firearm project.
Tested and Approved:
The Smith and Wesson M&P FPC Muzzle Brake (10mm Only) has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Smith and Wesson M&P FPC Muzzle Brake (10mm Only) . Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Outstanding Muzzle Break!
Installed this muzzle break on my 10mm S&W M&P FPC. Went to the range yesterday and shoulder fired from a standing position with the Holosun HS510C GR reflex sight, no magnification, and no sling. Zero misses on a 6” AR500 steel plate at 100 yards, even with a fast-firing sequence. The 10mm caliber is effective at that distance with the 180-grain bullet and muzzle velocity of 1200+ FPS, and the muzzle break helped with target reacquisition time, particularly during fast fire.
Bob - Viet Nam Vet '69-'70
Eagle, Idaho
While tightening the brake (with or without the crush washer) I am unable to orient the device to keep it straight....flat side on bottom. Do you recommend shims? Why would this be an issue?
I just ordered the threaded barrel from Springfield for my XDM 10mm. Will this fit it?
No - The threading is not the same.
Will this fit the RUGER 10mm LC Carbine?
We have a 10mm muzzle brake listed on the Ruger LC Carbine Page.
will this work on the 40 cal fpc rifle
Yes - this will fit the .40 cal
What is the size and thread count? (e.g. 1/2"x24, 5/8"x24, 5/8"x28, etc.)
September 3, 2025 10:41 PM
From the product description
Fits 9/16-24 barrel threads
Answered by
kalen37 /
September 4, 2025 9:57 PM