- Extractor Exact Edge cut to +/-.0001" Precision
-
More Positive Engagement with Bullet Casing!
- Premium Ruger PC Carbine Upgrades for Superior Performance
- Precise Hook Point Edge to Promote Extracting
- Works for 9mm and .40 Cal Ruger PC Carbine
- Wire EDM Cut from A2 Tool Steel
- Hardened to RC 58-60
- Black Oxide Premium Finish
- Will Not Lose Edge Under Impact!
-
Designed & Manufactured to Fit and Function properly in Ruger PC Carbine.
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
Ruger PC Carbine Exact Edge Extractor
- Wire EDM cut from A2 Tool Steel
- Hardened to RC 58-60
- Black Oxide Premium Finish
- Designed & Manufactured to Fit and Function properly in Ruger PC Carbine.
Ruger PC Carbine Exact Edge Extractor will fix common Ruger PC Carbine Problems with Failure to Extract Malfunctions from the Factory Stamped Metal Extractor. M*CARBO specializes in Custom Ruger PC Carbine Accessories to Improve Performance and Function.
Precision Wire EDM Cut from A2 Tool Steel & Hardened to RC 58-60 with Black Oxide Premium Finish!
Ruger PC Carbine Exact Edge Extractor is Wire EDM Cut to the tightest possible tolerances (+/-.0001") by utilizing the Wire EDM manufacturing process. The engagement area of the M*CARBO Ruger PC Carbine Exact Edge Extractor provides more Positive Engagement with the rim of the cartridge, allowing for a more complete casing extraction. This prevents the possibility of the casing getting stuck in the chamber or bolt face due to soft or worn extractor edges.
*Works for Ruger PC Carbine 9mm and Ruger PC Carbine .40 Cal!*
We highly recommend getting the Ruger PC Carbine A2 Tool Steel Bolt Head Pins and Extractor Pin Replacement Kit for Added Ruger PC Carbine Reliability & Longevity!
Ruger PC Carbine Upgrades manufactured from more premium materials over the cheaper factory parts. Custom Ruger PC Carbine Mods like the Exact Edge Extractor will improve overall function and reliability. Ruger PC Carbine Exact Edge Extractor will not lose its edge under impact like the factory extractor made from stamped steel, that will have their edges roll over and cause extraction problems after a short period of use.
Ruger PC Carbine Exact Edge Extractor is hardened to RC 58-60 to withstand years of use and still maintain its edge, making it a must have Ruger PC Carbine Aftermarket Accessory! Premium Ruger PC Carbine Upgrades for Factory Ruger PC Carbine Parts.
Designed / Tested to Fit & Function in Ruger PC Carbine.
Ruger PC Carbine Resources:
If you're getting the Ruger PC Carbine Exact Edge Extractor, then you might find the following Ruger PC Carbine Resources useful in further enhancing your firearm. Download the Ruger PC Carbine Owners Manual or use the Exploded View of the Ruger PC Carbine Parts Diagram to plan your next firearm project.
Tested and Approved:
The Ruger PC Carbine Exact Edge Extractor has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the Ruger PC Carbine Exact Edge Extractor. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Excellent upgrade
I wasn't sure if this would be necessary until I took a closer look at the stock extractor I was using and saw that More than half of the extractors edge had worn off. I put in this new one and have no problems at the range.
Reliable
Originally bought ita couple of years ago to replace factory extractor as it was worn out. Running smoth over 2 years and thousands of rounds. Bought another one just to have.
Very important upgrade!!
I bought a new PC9 in November and shot about 750 rounds thru it stock. I noticed for rounds 500-750 that I would stovepipe about 1 in ever 20 rounds.
I installed this, the shock buffer, and the upgraded pins and recoil retention clip, and have had 0 stovepipes since installation (about 500 rounds)
I am super happy with this product - comparing the two, it was obvious that the stock one was unable to reliably grip the casing for ejecting
Excellent
My PC9 had a stove pipe and FTE problem until I installed the Exact Edge Extractor from MCARBO. NO more problems with my PC9. Went to the range today and put 150 rounds down the pipe flawlessly. I also changed out the bolt pins when I did the extractor, too easy.
It works!
When I first got my pc carbine it was stovepiping ALOT. O returned it to Ruger and once I got it back it was much better. Maybe 2 in 100 rounds. I put in this extractor and now it’s 0 in 150 rounds so far.
Ruger PC exact edge extractor
I purchased a new Ruger PC carbine recently and right off the bat I was getting stovepipes about every 20-25 rounds, which was of course very disappointing. The rounds that were being ejected were done so in an erratic fashion. I was using new Remington UMC 124 grain ammo. I ordered the extractor from MCARBO and my order was delivered promptly. Installation was very easy. Since installing this part I have had no more FTE or stovepipes. The spent cases are being consistently ejected at about 3:00 and they are landing several feet away. I have shot at least 300 rounds so far and a couple different brands with no problems. I hope this will hold up over time. It was really like night and day comparing the Ruger and MCARBO part. I am happy with this purchase. Thanks
Great
I would get a failure to eject about every 20 rounds. After installing I shot 200 rounds through the PCC from 3 different brands and had no issues at all. So happy. Thank you
Rod tozour
It's nice to have my carbine not have anymore problems. Very happy with mcarbo.
What is the warranty on this? Mine broke and cost me a match today.
Thank you! I already received the replacement and installed. Crystal assisted me.
Bullseye North wanted me to wait 2 months for the replacement... Thanks to MCARBO for taking care of the replacement directly.
I'm sorry to hear this! We offer a full 100% warranty replacement on this part. If you haven't already, please email us at help@mcarbo.com and we will make sure this is taken care of for you.
Will this extractor fit the pc charger
I attempted to order the exact edge extractor and extended mag release formthe ruger pc9 this morning. They showed as in stock but when I went to checkout I got a not available notification.
Are the parts available and if so, do you ship to California?
darbur December 10, 2021 3:21 PM
yes there is no regulation on this part