WHAT'S IN THE KIT:
- 1 - Custom Lighter Trigger Return Spring
- 1 - Custom Lighter Sear Spring
HK VP9/VP9SK/VP40 Trigger Spring Kit
Enhance your HK VP9 with a 35% trigger pull reduction and heightened performance using the M*CARBO HK VP9 Trigger Spring Kit! This drop-in kit ensures a smoother, crisper, and lighter trigger upgrade, offering an immediate ~2lb reduction in trigger pull.
Compatible with HK VP9, VP9SK, VP9 Tactical, & VP40.
Upgrade your factory HK VP9 trigger with our superior aftermarket parts, designed for competition-level performance! Experience noticeable improvements with our custom HK VP9 modifications, crafted for significant results.
Our American-made HK VP9 parts are developed by combat veterans, ensuring top-notch quality and performance. The Trigger Spring Kit is manufactured using the highest quality American Spring Steel - ASTM A228 Music Wire, providing the best HK VP9 trigger pull available.
Choose M*CARBO for the best HK VP9 custom parts, designed to improve accuracy and produce tighter shot groups! Maximize the potential of your HK pistols with our custom upgrades. If you're planning any modifications for your HK VP9, make sure to add this essential upgrade to your list – you'll love the transformed trigger pull!
HK VP Series Resources:
If you're getting the HK VP9 / VP9SK / VP40 Trigger Spring Kit, then you might find the following HK VP9 Resources useful in further enhancing your firearm. Download the HK VP9 Owners Manual to plan your next firearm project.
Drop Tested and Approved:
HK VP9 / VP9SK / VP40 Trigger Spring Kit is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The HK VP9 / VP9SK / VP40 Trigger Spring Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the HK VP9 / VP9SK / VP40 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
But why don't you deliver to Germany?
Hello!
Thanks for the great video. But why don't you deliver to Germany?
I would like to buy the trigger spring kit for my HK SFP9 (HK VP9)!!!
Thanks and best regards from Germany.
USA is great ! I like Donald Trump !!
2nd M*Carbo spring kit
A year or two ago I got a trigger spring kit for my Hellcat. Very satisfying experience and result. So I decided to upgrade my VP9. I am familiar with German engineering and tolerances from times past: they can be difficult. Also I suffered a stroke 5 years ago rendering my left hand less than productive. Nevertheless, I decided to try the trigger kit. Shying away from such things isn't in my makeup. Although some pins very tight, I soon had the gun apart. The safety spring was truly problematic. This of course isn't M*Carbo's fault. My safety latch just wouldn't catch and hold that little spring! So, being very careful, I used my Dremel to put a small groove in the dimple that holds the spring. That worked well. The rest of the parts reinstalled pretty easily. Although I haven't fired the HK yet, the trigger pull is much lighter than before. The video was a lifesaver for me and enabled a successful reassembly despite my handicapped left arm. Great job on the video!
VP 9 Spring Kit
the VP 9 spring kit was easy to install. The tutorials online were very helpful with tips on the procedure to reassemble the trigger spring and sear spring.
Tom Ireland
Louisville, Tennessee
Had some difficulty. But worked it out in the end so read on.
I followed the video instructions and had an issue with the small half pin that is above the trigger as it was in there solid. Had I pried any more I would have broken the plastic gun body. Yet I did manage to install the trigger spring without its removal. Next I installed the rear small spring by carefully getting the rear assembly out at an angle. I went to the range and found that the trigger was way too light and dangerous. I was shooting and it fired by itself during recoil. I took it home and put the original rear spring back in and did another test at the range. This time it was just right and now safe to use. I still think that this upgrade was well worth the effort. Even though it gave me hell. I think the only reason I was able to accomplish it, is because of my automotive mechanical experience and picks and tools I have. I only hope that others don't run into the pin that won't come out like mine. Its not worth breaking the gun over if you can't get it to come out, even with heat and lube. It's not MCARBO"S fault that HK put that pin in so tight. I think the kit is a great value and improvement overall. If you too run into a hard case pin I say, take it to a pro and let them install the kit. Good luck with yours! You can always try to remove that pin first before ordering your kit. Its never worth breaking your gun body!
makes a nice difference
I installed three kits in a hour. VP9 Match, VP9 and VP9SK all three are OR. (If you’re careful you can skip the pita step which is to remove the middle metal bracket.) The YouTube video is great for the full takedown.
The installation video was very helpful - had a hard time getting the trigger pin to release but everything else went fine - trigger pull was reduced to a little under 4#'s so it was right where you said it should be - very happy with the whole process - definitely would recommend buying this kit & watching the install video...
Very Effective
Initially turned my vp9 trigger into mush, but later realized I had locking block issues. After polishing disco and trigger bar, the lower pwr mcarbo springs complimented the work. Sear and striker engagement still crispy after 1 year installation and use. Good stuff.
Great Set
Installed this on my optics ready VP9. As long as you follow the videos on you tube for installation, it is pretty simple until the very last step. Having the right plyers and patience the spring will go in. Took it to the range. Works great!
I have heard some people complain about the trigger reset being weak. I did not have any problems.
Lowers pull by 1 pound
Does it work also with HK SFP9-L?
JacekB January 24, 2024 11:16 AM
Does this work on a H & K P30SK?
Is it possible to remove just the sear housing without disassembly of the trigger block? Or does the block and trigger assembly need to be removed in order to remove the sear block?
The sear housing will not come out without removing the other internal parts first.
Answered by
Jessicak /
January 30, 2023 12:37 PM
Can I assume that this will work on a VP9L?
December 10, 2022 5:45 PM
Yes. I believe the only difference is slide and barrel length.
Can you use this spring package in conjunction with after market triggers such as the lazy wolf VP series?
Hello Jeffrey, we have only tested our springs with the factory trigger so unfortunately, we are able to confirm the functionality or compatibility with the lazy wolf VP series. Please let us know how it works out for you if you decide to test it out.
Answered by
/
December 16, 2021 2:02 PM
Does this kit help shorten the reset on the VP9?
October 29, 2021 12:44 PM
It does not. It will only lighten the trigger pull weight