- 6061 Aluminum Replacement for Factory Plastic Slide Stop
- Corrects one of the major KEL-TEC PMR-30 Problems with the Factory Slide Stop; Flying off while shooting this
- Upgraded Aluminum Slide Stop features Locking Engagement Cup Point Set Screws that locate into the
recesses of the Slide Stop Bar.
- Improved Design over Factory Plastic Slide Stop to Further Enhance Overall Slide Operation by Shooter
- 2x Taller than Factory Slide Stop!
- Protected by the M*CARBO 100%
- Made in the USA!
- Fast Same Day Shipping!
- Will only Fit & Function on KEL TEC PMR 30. WILL NOT WORK ON CMR-30 OR CP33!
Installation Services Available
WHAT'S IN THE KIT:
- 1 - Precision CNC Machined 6061 Aluminum Slide Stop Replacement
- 1 - 1/16" Locking Engagement Cup-Point Set Screws
- 1 - 0.35" Hex Key
KEL-TEC PMR-30 Aluminum Slide Stop
Custom CNC Machined KEL TEC PMR-30 Aluminum Slide Stop Upgrade to allow easier operation of the slide by the shooter and keep the slide stop mounted in place to the firearm. Performance-Driven KEL TEC PMR 30 Upgrades to Improve KEL TEC PMR 30 Reliability and Overall Performance.
Innovative KEL TEC PMR 30 Modifications that correct KEL TEC PMR 30 Problems, such as the factory plastic slide stop flying off while shooting. As the plastic wears, the factory plastic slide stop will easily fall off or fly off while shooting due to the lack of a retention method and extreme blow back pressure delivered by 22 Magnum Ammo.
Immediate Improvement over factory plastic with M*CARBO Custom KEL-TEC PMR-30 Aftermarket Parts designed and manufactured to deliver a solution for common PMR-30 problems. American made KEL-TEC PMR-30 Accessories by Combat Veterans!
KEL-TEC PMR-30 Resources:
If you're getting the KEL-TEC PMR-30 Aluminum Slide Stop, then you might find the following KEL-TEC PMR-30 Resources useful in further enhancing your firearm. Download the PMR 30 Owners Manual or use the Exploded View of the PMR 30 Parts Diagram to plan your next firearm project.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KEL-TEC PMR-30 Aluminum Slide Stop. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
PMR 30 extended mag release
Worth getting, way better than stock, easy install when you take your time and do the swap on a table where it’s easy to see those tiny little screws. Well designed product, big fan. Thank you!
Found that with younger shooters the stock parts are not ergonomically suited for them. Switched them out and now I have to “fight” for my turn with my son.
A great fix for a big issue with the PMR 30.
Great addition for the pmr30. Easy install just be careful the screws are so so small and would be easy to lose. Mcarbo supplies extra screws. Follow video and definitely use lock tight onthreads
very nice little piece
after my stock slide stop fell of and in to the abyss it was nice to find an readily available upgrade for cheap money. had to pull the pistol apart to put it on due to access for the set screws but not a huge deal. looks nice works good.
Waste of time
You know what's more annoying than losing the plastic slide stop? Losing the $30.00 aluminum slide stop that you bought to fix that problem.
A solid upgrade
An improvement over the plastic. It just feels better. This is the second slide stop I purchased. The 1st one was installed by Kel-Tec with the complete upgrade kit and it came off during my 4th mag. Got lost in the grass and I had to buy another one. I called Kel-Tec and they told me they do not use loctite on the tiny screws. I put the 2nd one on myself and used loctite. Still there after 12 mags fired
Positive Surface Area Slide Release
It is very comfortable to have additional ergonomic surface area to release the top slide. So much easier to feel and engage!
I have an old PMR30, the slide stop broke...ordered a new one from you folks and it doesn't fit it appears. I"d appreciate any suggestions. May send you a picture to help clarify? it appears that the frame is in the way
November 25, 2022 9:14 PM
Please contact us at HELP@MCARBO.com, so a tech can assist you.
Are you guys gonna make more parts for the keltec cp33
At the moment we not working on anything for the cp33 but keep an eye out on our page a lot of new things are coming out
Will this part work on the Keltec cp33
Will only Fit & Function on KEL TEC PMR 30. WILL NOT WORK ON CMR-30 OR CP33!