- 1 - Custom Lighter Trigger Return Spring
CZ 452/CZ 455 Trigger Spring Kit
Improve your shooting accuracy with the M*CARBO CZ 452/455 Trigger Spring Kit that reduces your trigger pull from a stock ~2.75lbs to a modified ~1.75lbs, resulting in a nearly 50% trigger pull reduction! This CZ 455 trigger adjustment is engineered to be safe and effective, and improve the overall performance of your rifle. The CZ 455 Trigger Job is fast and easy, and can be done in less than 30 minutes.
The CZ 452/455 Trigger Spring Kit is made of the highest quality spring steel available, right here in the USA! This kit will improve your accuracy and tighten your shot groups. It's a simple upgrade that will save you from having to spend a ton of money on an entire CZ 455 trigger replacement.
Please note that this kit will NOT work on CZ 457. The CZ 452 Trigger Job is designed to be very easy to adjust, and CZ even built in a trigger pull adjustment feature on their factory triggers. All you need is the specially designed trigger return spring to take it to the next level and unlock the full potential of your factory trigger. Upgrade the trigger return spring for superior shooting accuracy without breaking the bank.
CZ 452/CZ 455 Resources:
If you're getting the CZ 452/455 Trigger Spring Kit, then you might find the following CZ 452/CZ 455 Resources useful in further enhancing your firearm.
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the CZ 452 / 455 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
This is very easy to install, and decreases trigger pull so that when you fire, you're less likely to pull the rifle off target.
trigger spring for CZ 455
I followed the CZ tutorial video. No issues. Go slow, take your time, no distractions, and as he said on the video use lite taps when tapping out your pin and lite taps when putting it back in. After I replaced the spring I took it down to the lightest point it would go and then went back up just where everything engaged. Very nice trigger pull. Thank you.
Extremely happy with the new trigger spring. Awesome shipping and price
Reduced trigger pull significantly. Still needs to reduce reset. Lowered my grouping.
I installed the new trigger spring and had the nut only 1/4 turn tighter than finger tight and the best I could get was still 2.5 pounds and that was with a professional trigger scale. the website states this will lower the pull to 1 pound.
CZ455 trigger spring
Couldn't be happier. From start to finish it took 10 minutes to install. Before trigger pull was 2.70 lbs. The trigger pull after installing the spring is now 1.25 lbs. Slightly better than advertised.
Cz 452 / 455 trigger spring kit
This kit reduced my trigger pull on my cz 452 by 50% it also reduced my trigger creep by 50% also. I highly recommend this kit.
455 trigger spring
Cut trigger from 3.5 lbs. To 1 lb. Very simple and safe
Will the CZ 452 / 455 Trigger Spring Kit work for my CZ BRNO Model 2E?
Yes it will work for the CZ BRNO Model 2E
Do you send Items to Russia?