CZ P10 Flat Trigger - Omega Competition Series

I originally had this in my original p10c which was just the regular model. I upgraded to a ported model , pulled it out to swap to the new one and it wouldn’t work. I contacted Mcarbo customer service to ask if their thoughts and they told me there were mixed results with the ported model. I was able to narrow it down to a slight difference in the barrel lug itself and the fact the ported one has more of a bull barrel in it.
Your mileage may vary, just be aware before you start.

I originally had this in my original p10c which was just the regular model. I upgraded to a ported model , pulled it out to swap to the new one and it wouldn’t work. I contacted Mcarbo customer service to ask if their thoughts and they told me there were mixed results with the ported model. I was able to narrow it down to a slight difference in the barrel lug itself and the fact the ported one has more of a bull barrel in it.
Your mileage may vary, just be aware before you start.

After previously installing the full CGW upgrade kit in my CZ P-10C, I did experience an improvement over the factory setup; however, several issues persisted—all of which could be traced back to the CGW trigger itself. Switching to the M*CARBO trigger completely resolved those problems.

The design of the M*CARBO trigger stands out immediately. Their method for adjusting pre-travel and over-travel is superior in both concept and execution. Installation is straightforward, and while the included jig is well-intentioned, it ultimately isn’t necessary to complete the install successfully.

Performance is where this trigger truly excels. It offers a very defined wall and a crisp, clean break with minimal creep. While it doesn’t replicate a 2011-style glass-rod break, it is unquestionably the best trigger feel I’ve experienced on any striker-fired pistol. The ergonomics are equally impressive, providing a comfortable and consistent trigger press.

If you’re considering an upgrade for your P-10 series pistol, do yourself a favor: skip the trial-and-error and go straight to the M*CARBO trigger. It’s a significant improvement and, in my experience, the best option available.

I'll just get right down to business! Every P10 owner needs this trigger! It is damn near the perfect striker fired trigger and everything one could want in a trigger! Adjustable pre travel and post travel, comes with proprietary striker spring. I installed this and polished all the trigger component contact points and I'm seriously impressed. I like it even more then my flat stroke p365 trigger from MCarbo. I have mine set to just the slightest nudge of take up to a nice firm know your there wall with NO CREEP and a carrot stick snapping in half break at a constant 3.5# before the polish 3# after the polish 4# without the striker spring. No post travel and a lovely short quick tactile and audible reset. The face is very comfy to the touch and easy to pull straight back and it doesn't pinch like the OEM trigger does. I can shoot this trigger faster then any other trigger I own for various pistols. The only thing that comes even close is my alpha timney for my Glock 19. The short strome for the p365 would be faster if it wasn't for signs trigger setup, but this CZ trigger is FAST. 17 thumbs up and every p10 owner should have this trigger, I've tried other aftermarket p10 triggers and this is by far the best,

 

I'm a loyal customer of CGW. Their P10 triggers are better than every other trigger on the market...except this one.

Have used 2 HBI triggers (they're fine) and have used 3 CGW triggers for extended periods. As long as you trust the thread locker to maintain your adjustments on the M-Carbo trigger (I do, and even JP requires it on their rifles), this is the best trigger.

Use the OEM striker and spring with this trigger. Don't mess around with light strikes or broken strikers (early model P10 did have a weaker striker, but the current one is the hardest available). May require some breaking in or polishing, but that's better than light strikes.

Trigger arrived promptly and included detailed instructions and tools for installation. Install was a breeze following the CZ disassembly videos available on YouTube. Much better than the factory trigger and has the ability to adjust to your preference. Another win for M*Carbo !!

Took literally five minutes to install. Multiple friends shot the cz against their Glocks and it out performed their guccified Glocks. Had a customer try my trigger while picking up his cz and went home and ordered the trigger.

I installed this on my P10c. An amazing improvement over he OEM trigger. Night and day. AM going to install this on my P10f as well. Talking about this trigger at my local gun range/shop a couple of the guys there said they like this trigger better than Cajun Gun Works....Let that sink in.