KEL TEC P3AT Accessories | KEL TEC P32 Accessories

KEL-TEC P3AT Heavy Duty Takedown Pin A311 Stressproof Carbon Steel replacement for Thin Metal Factory PinCustom Locking Takedown Pin Spring Replacement for your KEL TEC P3AT factory takedown pin that is known to sheer off or back out while shooting. One of the most important KEL TEC P3AT Accessories as it will prevent a catastrophic malfunction when it matters most in a real world concealed carry situation. Heavy Duty Replacement that is 10x stronger than the factory KEL TEC P3AT part for...

KEL-TEC P3AT & P32 Max Control 13lb Recoil Spring Extra Power P3AT & P32 13lb Recoil Spring Extra Heavy Duty 13lb KEL TEC P3AT Recoil Spring and compatible 13lb KEL TEC P32 Recoil Spring for increased performance. The P3AT & P32 Max Control Recoil Spring is a direct replacement for the 9lb factory recoil spring. The Aftermarket 13lb Recoil Spring is designed to reduce muzzle flip and improve handling under rapid fire. Perfect upgrade for cycling standard full power ammo. Fits KEL TEC P3AT and...

KEL TEC P3AT Grips / KEL TEC 32 Grips - Rubber Adhesive Laser Cut P3AT / P32 Grip with Propriety Textured Rubber Adhesive Material for Polymer GripsWorks for Both KEL TEC P3AT Grip Frame and KEL TEC P32 Grip Frame as they are the exact same size Strongest Adhesive for Best Possible KEL TEC P32 Grip Performance or KEL TEC P3AT Grip Performance that won't move around while shooting! A must for any KEL TEC P32 Accessories Build Out to help give you that extra competitive edge...

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner.  It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels.  Solvent safe and will not deteriorate when you apply bore cleaner to it.  One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the...

Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.