KAHR CW9 Accessories / KAHR CW40 Accessories

KAHR CM9 / CW9 / PM9 Stainless Steel Striker Guide Custom 316 Stainless Steel Striker Guide Upgrade KAHR CM9 / CW9 / PM9 Stainless Steel Striker Guide is an excellent upgrade over the factory plastic striker guide.  A must have KAHR CM9 Accessories that will provide a Lifetime of Performance over the cheap plastic striker guide that is know to wear or break.  Stainless Steel Striker Guide also works for KAHR CW9 Accessories and KAHR PM9 Accessories.   Custom KAHR...

KAHR CM9 Trigger Spring Kit Custom Lighter KAHR CM9 Striker Spring and Striker Block Spring  ***KAHR CM9 Trigger Spring Kit also works in the KAHR CM9, CM40, PM9, PM40, CW9, CW40, KAHR P380 and KAHR CW380*** Reduced Trigger Pull by Nearly 50% with KAHR CM9 Trigger Spring Kit!  This is a Must Have for your KAHR CM9 Accessories List!  Must have upgrade for KAHR CW9 Accessories and KAHR PM9 Accessories for a Competition Level Trigger Pull! Custom KAHR...

Silicon carbide is an abrasive sharp synthetic mineral that cuts fast and smooth.  Use with water or cutting oil to reduce clogging and extend abrasive life.  Due to its razor-sharp grains, silicon carbide will have no problem easily cutting glass, plastic, and metal under light pressure.

9MM / .380 / .38cal / .357 Bore-Snake Gun Barrel Cleaner Works Great with MIL-SPEC CLP! Get the inside of your barrel clean with the Bore Snake Cleaner.  It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels.  Solvent safe and will not deteriorate when you apply bore cleaner to it.  One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the...

Firearm & Feed Ramp Polishing Kit includes:1/2 oz can of Non-Abrasive Firearm Polish3 Bullet Felt Tipped Dremel Polishing Bits1 Pair of Black Nitrile Industrial Strength Gloves1 Microfiber TowelPolishing your Feed Ramp greatly Improves feeding operations by eliminating microscopic machining lines that slow down the travel of the bullet into the chamber, thus increasing the chances of an Failure to Feed (FTF) Malfunction. Watch the video below for a "How to Polish Feed Ramp" instructions. Flitz...

Gunsmith Bench BlockGunsmith Bench Block 1" Thick 3D Printed ABS Plastic - Moderately Rugged 4 holes - 3/16" - 1/4" - 5/8" - 3/4" One 1/4" slot for pushing out pins under tension Simple and Effective Design to Replace the Block of Wook with a Hole in it.