- Reduce your trigger pull from a stock 6 - 7lbs to a modified 3.75 - 4lbs
(Average results can vary up to +/- 1lb)
- Improve accuracy and overall rifle performance
- Fits and Functions in the following KAHR Pistols: CM Series, PM Series, MK Series, CW Series, S Series, P
Series, K Series.
- Nearly 50% Trigger Pull Reduction!
- Get the complete KAHR CM9 Trigger Job!
- Works in the KAHR CM9, CM40, CM45, PM9, PM40, PM45, MK9, MK40, CW380, CW9, CW40, CW45, S9, P380, P9, P40, P45,
K9, K40.
- Highest Quality American Spring Steel ASTM A228 Music Wire
- KAHR CM9 Trigger Kit includes a Custom Lighter Striker Spring and Lighter Striker Block Spring
- Protected by the M*CARBO 100%
Lifetime Guarantee
- Made in the USA!
- Fast Same Day Shipping!
WHAT'S IN THE KIT:
- Custom Lighter Striker Spring
- Custom Lighter Striker Block Spring
KAHR CM9/CW9/PM9 Trigger Spring Kit
**Works for all of the following KAHR Pistols - CM Series, PM Series, MK Series, CW Series, S Series, P Series, K Series.
***KAHR CM9 Trigger Spring Kit also works in the KAHR CM9, CM40, PM9, PM40, CW9, CW40, KAHR P380 and KAHR CW380***
Reduce Trigger Pull by Nearly 50% with the KAHR CM9 Trigger Spring Kit! This is a Must Have for your KAHR CM9 Accessories List! Must have upgrade for KAHR CW9 Accessories and KAHR PM9 Accessories for a Competition Level Trigger Pull!
Custom KAHR Accessories like the KAHR Trigger Spring Kit will fit the following KAHR Pistol Models:
- KAHR CM9
- KAHR CM40
- KAHR CM45
- KAHR PM9
- KAHR PM40
- KAHR PM45
- KAHR MK9
- KAHR MK40
- KAHR CW380
- KAHR CW9
- KAHR CW40
- KAHR CW45
- KAHR S9
- KAHR P380
- KAHR P9
- KAHR P40
- KAHR P45
- KAHR K9
- KAHR K40
Watch the KAHR CM9 Disassembly and Installation Video. Get the Best KAHR CM9 Upgrades for Superior Trigger Performance!
Reduce your KAHR CM9 Trigger Pull from a Stock 6 - 7lbs to a modified 3.75 - 4lbs with M*CARBO KAHR CM9 Mods! American Made KAHR CM9 Trigger Kit for a Fully Custom KAHR CM9 Trigger Job to give you a lighter, smoother trigger pull on your KAHR CM9. New KAHR CM9 Parts for Superior Performance by MCARBO!
Custom KAHR CM9 Trigger for Lighter and Smoother Trigger Pull. Best KAHR CM9 Trigger Upgrade! Custom Accessories for KAHR CM9 Pistol! Download the KAHR CM9 Specs. Best KAHR CM9 Custom Options from MCARBO! Also reduces trigger pull on the KAHR CW380 and is a must for KAHR CW380 Accessories!
KAHR CM9/CW9/PM9 Resources:
If you're getting the KAHR CM9 / CW9 / PM9 Trigger Spring Kit, then you might find the following KAHR CM9 Resources useful in further enhancing your firearm. Download the KAHR CM9 Owners Manual or use the Exploded View of the KAHR CM9 Parts Diagram to plan your next firearm project.
Drop Tested and Approved:
KAHR CM9 / CW9 / PM9 Trigger Spring Kit is drop Tested according to SAAMI Standard Z299.5 rating (12" & 48").
Tested and Approved:
The KAHR CM9 / CW9 / PM9 Trigger Spring Kit has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the KAHR CM9 / CW9 / PM9 Trigger Spring Kit. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Easy and effective
This spring kit works great is priced right and is super easy to install.
Almost night and day difference in trigger pull.
You can't go wrong with this product.
Kahr PM9 spring kit
Installed spring kit, easy fun install using Mcarbo’s install videos. When tested at the range I used at least 7 brands of 9mm ammo. This is my carry gun and I wanted it 100% reliable. Had 3 brands of ammo with
Misfires, 2 of which I had fired with stock springs and had no problems. So I reinstalled stock springs to keep reliability as high as possible. Did make sure gun was
thoroughly cleaned with no grease or oil in or on striker cavity or striker. Pull was definitely nicer but too many misfires.
Boom Chicha!
Easy peasy. Outstanding video tutorial. We do a lot of M*Carbo mod installs and upgrades at our gun store. These products are awesome.
Chip Bulkeley
White Settlement, Texas
Barely does anything, if it does anything at all
Didn't test the before but as for the after, my trigger pull weight is 6.5 pounds. If it's acceptable to you to pay over $20 with shipping to still have a heavy ass trigger, then avoid this, as the risk of light primer strikes isn't worth the negligible reduction in pull weight
Buy it
I purchased this to lighten the pull on my Kahr CW9. It reduced it by more than half and full reliability, no light strikes or misfires at all. Just buy it and see for yourself.
Pm9 trigger spring fail
Installed a spring kit in my Kahr PM9 about four weeks ago and shot it at an indoor range. I was very pleased with my new setup, after firing 50-70 rounds. Yesterday went shooting with a friend and had nothing but light primer strikes. Couple would go off here and there, not real happy since this is a carry firearm that could have left me in a bad situation if that occasion were to arise. I was excited because of how much more accurate my hits were, but I guess it wasn’t meant to be. Sending them back for a refund.
DelDave32
Some where in Delaware
Pm9 trigger spring fail
Installed a spring kit in my Kahr PM9 about four weeks ago and shot it at an indoor range. I was very pleased with my new setup, after firing 50-70 rounds. Yesterday went shooting with a friend and had nothing but light primer strikes. Couple would go off here and there, not real happy since this is a carry firearm that could have left me in a bad situation if that occasion were to arise. I was excited because of how much more accurate my hits were, but I guess it wasn’t meant to be. Sending them back for a refund.
DelDave32
Some where in Delaware
Installed spring kits in KAHR PM40,CM40&K40 using the excellent M*Carbo installation videos and the results were as advertised. Very satisfied.
Have you tested these Kahr kits on the P9 pistol?
Hello, Yes we have! The P9 is included in our list of tested and approved models for this spring kit.
I notice that you have a trigger kit for a Kahr CW380, but not for the CT380. Will the kit for the CW work in the CT?
Hello, we have not tested our kit in the CT380 so we are unable to confirm or deny the kit's compatibility. If you do happen to try it out, we would love to hear your results!