- The M*CARBO AK-47 Extra Power Recoil Spring is designed to enhance the efficiency of your AK-47's cycling, boasting 15% more strength than the OEM Recoil Spring.
- Mitigates the impact of the bolt carrier on the rear trunnion, reducing wear.
- Diminishes felt recoil, offering a more comfortable shooting experience.
- Contributes to prolonging the life of the AK-47 receiver and prevents the rivets from wallowing out.
- Facilitates better control of the AK-47 under rapid fire.
- Suitable for the entire Kalashnikov family of firearms, including AK-47, AKM, AK-74, AK-74M, and all Draco models.
- Results in less wear on the bolt carrier nose, ensuring longevity.
- Durably constructed, this spring is set to outlast the original factory recoil spring by thousands of rounds.
-
A notable upgrade to improve AK-47 feeding operations.
- Made In The USA!
- Fast Same Day Shipping!
WHAT'S INCLUDED:
- 1 - AK-47 Extra Power Recoil Spring
AK 47 Extra Power Recoil Spring
Our Extra Power AK-47 Recoil Spring is designed to compensate for the common issue of gas ports being drilled out too wide in most AK's, which can lead to over gassing and excessive wear on the internal action of the firearm.
Not only does our recoil spring prevent premature failure, but it also has direct benefits for the shooter. It improves cycling operations and reduces felt recoil, making it much easier to control under rapid fire. Most importantly, it reduces the destructive impact on the Rear Trunnion, which prolongs the life of your firearm and prevents rivets from wallowing out.
Our Extra Power AK-47 Recoil Spring works for all Kalashnikov Family of Firearms, including AK-47, AKM, AK-74, AK-74M, and All Draco's. It's also an excellent upgrade to aid in feeding operations when using soft point ammo or used surplus magazines.
We use Premium USA Spring Steel in our recoil spring, making it better than Wolff Extra Power Recoil Spring AK-47. We highly recommend avoiding recoil springs from Military Surplus AK-47 Parts due to limited life and deteriorated protection they offer.
Upgrade your AK-47 Recoil Spring Assembly today with our Extra Power AK-47 Recoil Spring to improve cycling operations, prevent damage, and enhance overall shooting performance.
AK-47 Resources:
If you're getting the AK-47 Extra Power Recoil Spring, then you might find the following AK-47 Resources useful in further enhancing your firearm. Download the AK-47 Owners Manual or use the Exploded View of the AK-47 Parts Diagram to plan your next firearm project.
Tested and Approved:
The AK-47 Extra Power Recoil Spring has been tested repeatedly to ensure reliable operation and safety.
ATTENTION:
You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces, with or without the AK-47 Extra Power Recoil Spring. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.
Works as it should
The spring itself is great! Awesome upgrade from stock. I had he’ll trying to install it by getting the spring down far enough to flip the bar. The easiest way I found maybe not safest was to stick an Allen wrench in and hold the spring down past the cap and install the cap that way. Maybe I’m just a weakling but it worked best for me.
what a difference!
I installed this on my ZPAP M70 and it is a night and day difference in recoil. Before I would rather shoot my 12 gauge shotgun over my AK just to avoid a beat down, now my AK is a smooth machine! Install is a little tricky like others have said, and for your sake, wear safety goggles like their install video suggests! You'll be pleased you put in the effort.
Difficult install but definable stronger
Difficult install. Definitely strong (probably more than 15 percent vs the old Romanian one). 2 person job for sure. If it doesn't cycle, can just drill out gas block bigger. Applied generous coat of miltec-1 and baked it on like 5 times. (And at least 3 coats on everything else) Runs firmly but smoothly.
Difficult install but definable stronger
Difficult install. Definitely strong (probably more than 15 percent vs the old Romanian one). 2 person job for sure. If it doesn't cycle, can just drill out gas block bigger. Applied generous coat of miltec-1 and baked it on like 5 times. (And at least 3 coats on everything else) Runs firmly but smoothly.
It works
When installed it functions as a recoil spring. I cannot really feel any difference over the Arsenal supplied spring in my SLR107.
I can tell you that when installing the new spring you will hear words bellowing from your mouth you have never heard before. To say installation is a breeze is delusional. Keep at it and despite the wife going to her mothers house taking the kids and despite your dog hiding from you, eventually you will get the spring installed and the retainer clip back on with only a sore spot on your sternum and a bit of hoarseness to show for your efforts.
I installed an ALG recoil spring in another AK I own........and found the same vocal outbursts during that install as well. Make SURE you want to replace your old spring before going down this road.
barbarosa
middle of nowhere west-central Wisconsin
Ak spring
Me and my son have many Aks. This is the spring of my choice to use. There's no better spring that I have found.
Ak spring
Me and my son have many Aks. This is the spring of my choice to use. There's no better spring that I have found.
Ak spring
Me and my son have many Aks. This is the spring of my choice to use. There's no better spring that I have found.
Will it work on YUGO'S
jm65 November 12, 2023 6:34 PM
Got one of these for my Zastava 7.62x39, curious if it would work on Zastava’s M77 in .308?
Has anyone tried running this in a 5.56 AK? I know it was speced for 7.62X39 just wondering what effect it would have running .223 or 5.56. Have an M90 with the adjustable gas block, so there might be some room for adjustment if it's not too far off.
Will this spring work in the PSL-54?
Will this work in the ZPAP M-70?
January 20, 2023 11:43 PM
I have one in my M70 and shot it today. Ram flawless with no issue. Noticeably different recoil impulse. Ordering more for my others as well.
Answered by
/
May 28, 2023 11:19 PM
Yes. It will work with the AK family of rifles.
Will this work with a N-Pap?
Nipty December 22, 2022 2:27 PM
Yes. It will work with the AK family of rifles.
Does this work in Norinco ak47 in 7.62x39 and 5.56?
November 13, 2022 7:49 PM
It will work with the 7.62x39 version, as that is the caliber the AK47 is designed for. We can not say the same for the 5.56 version as we have not tested it on any calibers outside 7.62x39
Is this spring compatable with Riley Defense Rak- 47- C- Ca?
DonC November 11, 2022 6:43 PM
Yes, that is still an AK-47 family-style firearm, just Riley Defense's twist on it.
Hello, do you have an extra power spring for a micro Draco.?
I ordered one from you that says it will work with all Draco's..... but it seams to be to long. Any help would be greatly appreciated.
thank you, Carl
Our spring is longer to give the extra strength.
Will this work on the PSA AK's?
Jopro September 12, 2022 11:54 AM
The piston system is still the exact same as a normal AK, PSA just updated the furniture and refined a few parts. It is still an AK.