• Simply grip, rip and you are good to go!
  • Integrated bronze bore brushes
  • 160x more surface area than standard patches
  • Fastest 3 Action Bore Shine
  • Brass weight on the pull cord is stamped with the barrel size
  • 12 GA Bore Snake has a 12 stamped on Brass Weight
  • Machine Washable & Reusable
  • Lightweight & Compact
  • A Must for the Range Bag!
  • Works Great with MIL-SPEC CLP!

12 Gauge Shotgun Bore-Snake Gun Barrel Cleaner

Get the inside of your barrel clean with the Bore Snake Cleaner. It’s a flexible bore cleaning device that is designed to clean the bore of pistol and rifle barrels. Solvent safe and will not deteriorate when you apply bore cleaner to it. One piece design removes fouling with the integrated corrosive-resistant bronze brushes and wipes it away in one pull thorough the bore of the barrel. One pass loosens large particles, scrubs out the remaining residue with a bronze brush, then swabs it all spotless with a cleaning area 160X larger than a standard patch.  Just make sure you are using the correct Bore Snake for the Caliber Firearm your cleaning.  Size is stamped on the brass weight; in this case a 12 is stamped for 12 Gauge Shotgun Bore-Snake

The pull cord is 2ft long has a weighted brass tip to allow easy drop/locate into the Bore of the Barrel. The cord itself is Mil-Spec 550 Parachute Cord. The Bore Cleaner Webbing is 2ft long and has 2 integrated bronze brushes with a double layered Wipe at the end that is 160 times larger than a standard cleaning patch. It's also much easier to use and store! 12 Gauge Shotgun Gun Bore Snake Cleaning Tool!

Bore Snake vs Cleaning Rod - Instead of Jamming a Rod down the bore of the barrel and potentially impacting the rifling, you can gently pull the Bore Snake Cleaner through the Bore without any concern of damaging your rifling. The Bore Snake also does a better job cleaning the bore and is faster than a standard cleaning rod that can potentially damage your rifling inside your barrel if used incorrectly.

Add to the longevity of your handgun or rifle by cleaning your barrel bore!

Packs easily into your gun case or pocket.

Machine washable or just use soap & water.


**Method is Universal and will Apply all Firearm Types and Calibers**

Step 1 - Make sure your firearm is clear

Step 2 - Apply CLP to your Bore Snake around the Bronze Bristles.

Step 3 - Drop the Brass Weight down into the barrel and pull the direction of bullet travel

Step 4 - Pull all the way through the end of the barrel

Keep Pulling All The Way Through...

Step 5 - Repeat all steps 2-3 times.

Overall Customer Rating of 2 Reviews:
review-star review-star review-star review-star review-star

Great Product

review-star review-star review-star review-star review-star
I live the quality of this poor snake


It's a bore snake!

review-star review-star review-star review-star review-star
It's a tight fit. that's really all I can say about this. Took some muscle to pull it through the barrel. Hopefully with repeated use it will get a little easier.

Number of questions: 0