Need assistance? Call our experts: (727) 223-1816 or visit support.mcarbo.com

Close-up of KEL-TEC PMR-30 Stainless Steel Feed Ramp Installed in PMR 30

KEL-TEC PMR-30 Stainless Steel Feed Ramp (222292228111111)

4.87 stars, based on 211 reviews
KEL-TEC PMR-30 Stainless Steel Feed Ramp Introducing the performance-driven KEL-TEC PMR-30 Stainless Steel Feed Ramp by M*CARBO. Designed meticulously with double stack dual channel cuts, it guarantees an enhanced ramp feeding surface. The external...

Rating:
review-star review-star review-star review-star review-star

Review

Just installed the new feed ramp along with a new mag release this morning. The ramp quality is great and after polishing, even better. Installation is straight forward if you watch the video. I will say that older eyes and larger fingers didn't help. I resorted to using a pair of locking forceps to get the spring in the tiny hole. The forceps made the task much easier. It gave me the control I needed. It was also useful to hold the ramp while polishing. Now, off to the range for some shooting to see how the new ramp and release work.

Rating:
review-star review-star review-star review-star review-star

Review

Just replaced with polished feed ramp and magazine catch what an improvement good job

Rating:
review-star review-star review-star review-star review-star

Review

Hello, I purchased the stainless steel feed ramp along with the enhanced mag release and most of the kit , other than the tools. I pulled up the video on youtube on how to polish the feed ramp and also how to replace the mag release. I must say, everything went just as smooth as the video itself! I really like the step by step instructions on the video. The project of polishing the feed ramp and changing out the mag release took me 1 hr. and 8 min. If I ever need to do anything else to any of my guns you can bet I'll be looking up M Carbo! Me also being a veteran, can appreciate what you guys stand for and what we all fought for! Thank You!

Rating:
review-star review-star review-star review-star review-star

Review

works good i guess...didn't fire gun before installing new ramp...only had one. did not eject out of 60 shots...bought gun new...

Rating:
review-star review-star review-star review-star review-star

Review

Must have upgrade. The poly feed ramp was awful. Function is 100% after swap. It’s as reliable as a wheel gun!

I even polished the bolt face. Make sure you move the extractor out of the way.
review image  

Rating:
review-star review-star review-star review-star review-star

Review

just installed the new feed ramp and mag release, the gun still wont cycle CCI 30 gr, but seems to be fine with 40gr. rounds. big improvement with the new ramp.

Rating:
review-star review-star review-star review-star review-star

Review

Mcarbo is thumbs up ,quick shipping, great product. Intalled feed ramp in pmr 30 keltec but haven't had a chance to try it out yet.







Rating:
review-star review-star review-star review-star review-star

Review

Feed ramp install was easy, some improvement over factory feeding. Magazine release button install easy. However mag release button failed to take all of free play out of mag base plate to frame gap.

USPS very piss poor delivery time.

Vic Knight

Rating:
review-star review-star review-star review-star review-star

Review

Love the new feed ramp, great addition to my gun.

2nd one I've bought

Rating:
review-star review-star review-star review-star review-star

Review

This is the second feed ramp I have bought and installed. Fixed all feeding issues with both pistols.

2nd revision feeding ramp issues

Rating:
review-star review-star review-star review-star review-star

Review

It seems as if I'm the only or at least the very few that are having issues after installing the 2nd revision feeding ramp. I had high hopes for a smooth operation after completing the installation of the MCarbo feeding ramp, however now I'm having more failure to feed issues than what I had with the plastic feeding ramp. I have previously installed the enhanced mag release upgrade and that made a big difference. But the new feeding ramp problems are bumming me out. I have failure to feed with either flat nose or hollow point CCI ammo about 4-5 times with each 30 round mags. Anyway, I'll clean the gun out real good again and have more rounds through it at the next range time. Let's see if it gets better.

A must for any pmr or cmr

Rating:
review-star review-star review-star review-star review-star

Review

This really made a big difference in how my pmr fed. It just runs now! 400rds without issues. Don't think about, just do it

A Ramp That Doesn't "Squish"...

Rating:
review-star review-star review-star review-star review-star

Review

Ordered both the SS ramp and polishing kit. Spent approx three-quarters of an hour w/polish & Dremel. As a result, the ramp now fairly gleams. It's literally a mirror and does it function as advertised! Beats HELL out of the stock 'plastic' ramp w/ its "squishy" molding dimple. A tad difficult to install, BUT, what a difference!



That said, why Kel Tec didn't fab this pistol, PMR30, w/ a SS ramp to begin w/, is just *NOT* understood. A distinct "night & day" difference in cartridge feeding. Worth every cent, and minute in part prep, spent on this piece/part!

After pic

Rating:
review-star review-star review-star review-star review-star

Review

Only one photo posted this is the after pic.
review image  

AIRBORNE LRRP

Rating:
review-star review-star review-star review-star review-star

Review

After I Polish the ramp to my liking the part in stalled relatively easy I would suggest buying the take down tool I had to make my own it worked but your tool is obviously much better.90 round mag dunp no problem.

Another fine product from M CARBO

Rating:
review-star review-star review-star review-star review-star

Review

Over the years I have bought a lot of Kel-Tec upgrades from M CARBO. Like always great results. Keep up the great work, lets start making more upgrades for KelTec products like for the RDB. thanks