Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Installing the springs was as easy as the video lays it out, the new 365's have a different slide disassembly but it all worked out I actually did the slide one day and the FCG the next day, to keep things simple for me.
Just got and installed the kit today. My 365 is newer than the one that they used to show the installation. For one, most of the internal parts are blued inside witch makes it a little harder to see the different parts. The sear is now blue also and has a hole for the one end of the spring to fit into and is a different shape as well. The biggest issue I had was getting the striker out of the slide. As it turned out, the striker has been redesigned and doesn't depress to release the slide cap the same way... and it too has been blued. All in all, it took me about an hour to get the parts installed and working just fine!! Thanks
The pull is better by far. If you have a 365 do it.
My wife and I both have P365’s and I picked up a spring kit for both our guns. The first one was a pain to put in, no fault to Mcarbo, the second kit went much smoother! Night and day difference in shooting. My wife enjoys shooting her P365 more after installing the M-Carbo spring kit. And both of our accuracy levels went up with the lighter trigger pull.
This is my 3rd set of springs and they did the job I was looking for. Putting them on a p365 is like a game of pick-up sticks but if your into guns that's part of the pleasure.
easy to install using the excellent video they have. noticeable reduction in pull
The installation took a little longer than expected. This is my faulty as I am unfamiliar with the P365 full takedown. The results are excellent. For twenty something bucks you get a great trigger!
Thanks to the instructional video, I installed this spring kit with ease. I have been very happy with this company and their products. I also purchased all their upgrades for the SUB 2000 and it was fun to work on it and was nice to have such great instruction. Buy this product, install it, you won't be disappointed and don't be intimidated by the installation, they couldn't have made it any easier. Thank you Mcarbo, your a great American company, I recommend these guys all the time.
I bought the trigger spring kit, PTFE grease and small Notch-Cut Tip flat blade tool. They all worked great. The initial trigger pull on my pistol was ~4lb 8oz and after installing the spring kit it's down to 3lb 8 oz and nice and smooth with a short reset. The Sig P365's FCU is a complicated little bugger so watching M*Carbo's video was invaluable. I brought it up on my tablet and would watch a section and pause the video while duplicating what I'd just seen. The Notch-cut Tip Flathead tool works well for removing the slide end cap and when removing and installing the trigger return spring. You can use a right angle dental pick but this tool makes it much easier. The PTFE Synthetic grease really does hold the sear spring in position while you insert the pin. A worthwhile investment in the little Sig.
Reduced trigger pull with straight forward easy install
Had a gunsmith do the install. Trigger pull before install was 5-5.25 lbs and after the install 3.25-3.5 lbs. A little low but I can live with that. Great product guys!
Shipped out quickly. Easy to install, tiny bit lighter pull with smoother action. Annnndddd less primer drag? Well that is what I noticed. Especially after I just replaced the striker. Now I read the casings after each shoot day.A noticeable smaller striker swipe. Makes my favorite carry even better. So far so good.
Improved reset & shaved pull weight from 6.7lbs down to just under 5, very pleased w/ the end result. Install wasn't a PITA, would buy again.
I wanted to take a little bit of pull weight off my Sig trigger pull. This was just the ticket. Dropped my pull weight to 4 1/4 to 4 1/2 pounds, which is right in my sweet spot for triggers. Installation was simple, just follow the video, or get a gunsmith to do it. It took me about 30 minutes, and I am very happy with the end result.
I took my time - watched the installation video multiple times - and got the install right. The information and presentation was simple and to the point. Great tips to ease the process! Once complete it absolutely smoothed out the function of the trigger as well as noticeably lightened the weight of the pull and reset! Makes the P365XL my favorite pistol I own! This kit definitely works as advertised!!! Keep up the great work!
Shipping was fast and springs fit fine. It lower my trigger pull about one pound from 4lb 11oz to 3lb 11oz. I also polished the sear and striker which smoothed out the trigger pull. The video for installing was very helpful .