Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
I purchased a trigger spring kit recently and found every part of the transaction to be awesome. Website easy to follow and order, make a payment. Super fast shipping. I will purchase additional items from this company.
Markedly lightened the trigger pull , thus reducing my shot group size. Installation instruction video was easy to follow. Highly recommended!
The trigger pull was reduced by 2lbs from the stock 6 down to a crisp clean 4. The original trigger felt squishy and springy. It now feels solid and breaks like glass. I also upgraded to the flat trigger with short take-up and reset.
Parts arrived on time and easily installed. Trigger pull went from 6.5 to 4.25#. The trigger is smooth and the creep is gone. It feels great. First trip to the range, no malfunctions, trigger is so smooth that I was shooting just as accurate free hand as from a bench rest. The p365 with the kit installed will be my EDC. I know I can shoot it well and carry it with confidence.
I bought my 365xl over the competitions sub compact nearly exclusively because of the factory trigger. However this kit has made it even nicer. Use the video from M*Carbo to help with the install as it is easier to follow than other videos I've found. The only difficulty I experienced was that all the videos for this install didn't address the thumb safety on the XL. It really should come out to make the install easier.
Springs went in easy and the result is a far superior shooting experience and faster re-acquisition. Nice work guys!
Installed, with the sig flat trigger and its at an avg of 4.5 lbs. I didn't have a 1/16 punch, so I used my micro flat head to lift the sear spring end inorder to insert the safety pin. Other than that it was a relatively easy installation. Now the trigger is more similar to my p320 x5 legion. Very satisfied! Thanks
Hadn't considered a trigger up grade for my P365 seen the one offered by MCARBO decided to give it a try got it put in, it is a nice up grade did a trigger pull test before and after 5.8 before and 4.2 after so definite improvement to a really nice pistol the reset is even better would highly recommend this upgrade.
Spring kit was received very quickly and is a superb fit and function; crisp feel--extremely satisfied with M*CARBO and product--highest recommendation
I ordered the trigger spring kit and in 3 days had it on my desk. I watched the video twice to make sure I had the overall idea and then, with the video still queued up began the process. In less than 30 minutes everything was installed and I was on my way to the range. I love the new lighter pull! M*CARBO made everything easy and painless for me!
I was pretty impressed with how easy this install was thanks to Chris’ great video. I watched it the day it came out and didn’t even have to rewatch to install. It was super easy. The pull weight is great now we just need a flat faced trigger with adjustable pretravel and over travel. More so pretravel but both would be excellent
The springs are fine. Unless you are an octopus, you don't have enough hands to fit them. The Sig P365 has a high number of minute parts that all leap off the fire control mechanism as you handle it. It took me several hours to eventually get it back together. Have 40 years engineering experience and wondered at times if I would end up buying a replacement FCM. The striker body is plastic with a bendable tab to release it. The aft end of the body is a tight fit in the sliding rear cover, requiring considerable force to release it, whilst mangling the back of the striker body out of shape. If you don't have a high degree of engineering common sense and appreciation coupled with infinite patience, take it to a gun smith. If you do decide to do it, the long, detailed video is absolutely essential. Be sure to photograph from every angle before starting, and at each major stage.
Great upgrade and easy to follow video. This was my first time modifying a gun. The MCarbo customer service was excellent- not good, not great....excellent. Ill be a customer for a long time!
good product and great support. two tips one take a picture of the trigger assembly before disassembling helps when your pins are slightly different then video. I had a tough time capturing the trigger spring leg with the pin but after a number of try's got it with a pointy pick rater then a punch.
Ordered this part in on a whim honestly, have installed a Million triggers/trigger kits in my glock’s and numerous other guns... never a Sig though, surprisingly! Recently acquired the Sig P365XL and no doubt, love the gun but always looking for ways to make My Things, “My very own Things” and to customize to My Standards. This one I was surprised by, a person wouldn’t think that by changing Simply the springs out in a gun would matter much but Trust me, they Do!! This kit is Perfect for this gun, the pre-travel is about the same as stock which I’m Perfectly fine with, but the “wall” and the reset are absolutely Flawless, it is Much lighter pull weight and Such a tight reset I am in Love with the results, I appreciate the company and I appreciate the products being offered by them.
I purchased and installed this spring kit along with a short stroke trigger and my Sig P365X began to have frequent misfires, which I believe were due to light fire pin strikes. I called customer service and they could not help me. They told me that I needed to write an email to their support staff and that their gunsmith would respond. After a couple of weeks, no response. I contacted customer service again and they said they would talk to the gunsmith about the delay in response. Now a week later, still no response. This is my everyday carry gun. I finally removed the MCarbo springs and replaced them with the original factory springs. I have had no misfires since this change. Based upon this experience, I have come to the conclusion that MCarbo’s customer support is very poor, if not nonexistent. I also questioned the quality of their products. As a final note, thinking there might be a break-in period, I put about 400 rounds through my pistol with their springs before replacing them with the original manufacturer ones. Breaking them in didn’t fix the problem.