Need assistance? Call our experts: (727) 223-1816 or visit support.mcarbo.com
While I don't have a second LCPii or a friend with one to compare side-by-side at the range, I absolutely notice a difference in the trigger pull from the factory original. It was easy enough to install as well. I did use another online video to cross reference and clarify one thing I wanted to confirm from the instructional video on this site, but it was very easy to complete. I highly recommend the Mcarbo punch set and hammer to assist with this - they make this so easy so it is worth it to have these tools, especially if you think you'll tinker with more upgrades on other guns.
Installation was a breeze with the youtube video...Exactly what i was wanting...Great product
Super kit! Thanks to installation video, everything went smoothly.
This kit caused me to misfire 50% of the time. I have switched back to my stock hammer spring and will go to the range to test it out again. I'll update this review then.
The trigger springs are nice though.
This spring kit works exactly as it says it will. It does provide a nice trigger pull on your LCP II! That said, if you watch the video and do the work at the same time, it becomes very apparent that they have done the install(s) multiple times and you haven't. You will need to take your time and make sure you follow the steps. If you do that, you will have no problems.
I lost a spring while cleaning the weapon. I found this on line and ordered it. The part was delivered in a timely manner and well packed for shipment. It is actually of a higher quality than the original
It was a much needed product, smoother action a lot better trigger pull.
The video was great. No problems and I cut my trigger pull by 1.5 lb's . On average I get 3.5/4 lb"s. The reset is good also Thanks -CARBO
I just replaced the firing pin spring, that reduced the trigger pull from over 8 to 6 pounds. That is a big improvement. Next up is the hammer spring, I will update when completed.
I put this kit in my wife’s LCP because she thought the trigger pull made her finger sore. Solved the problem and her accuracy went up. Then I got one for mine because I shot better with her gun. Installed them by watching the video and only took 20 min.
I had installed this kit in a LCP2 so I decided to try it in a LCP Max. Other than a couple of differences the install went well.
The pin holding the firing pin has to be driven out side to side instead of from bottom of slide. Also there is a little different hammer to sear configuration which was a problem at first but once I figured it out, all went well. Trigger pull was reduced to the #’s indicated. Can’t go wrong with Mcarbo.
Cut pull in half. Easy to install. Just follow the video.
Put new springs in ruger. Made about 2lb difference in trigger pull. Great video to help with the install. I would recommend these springs.
Ordered this along with the Stainless Steel Guide Rod, Heavy Duty Takedown Pin, and Extra Power Mag Release Spring, I also bought a Galloway Short Pull Trigger. Factory was 7.5 pull, and after the Upgrades the trigger pull was 4.5 pull. Cycled perfectly. Good Job!!!
Got 2of these kits. One for my LCP 2 and one for my wife’s. Both trigger pulls improved. My wife could even tell the difference with her gun.