Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
I installed this spring kit along with the extra heavy recoil spring and what a great difference. Went from a 7 lb trigger pull to a little over 4 lbs. The heavy recoil spring definitely helps with muzzle flip.
Took about 40 minutes to upgrade using their video installation and some patience. Trigger is not just lighter and a better reset, bit smoother and a noticeable wall in the travel now. Great upgrade you will not be disappointed.
My Micro 9 tested at 7.5 with a Wheeler Mechanical tester. After installation of the spring kit it tested at 5.2. I tested again after firing 40 rounds and it came in at 4.6. The Pro's Good price, great Installation Video, Much improved accuracy Con's. I did have one misfire out of 40 rounds. Will keep an eye on the lighter Firing Pin spring. Photo shows lighter spring strike compared to a factory Glock 19.
Kimber Micro 9 out of box had very heavy trigger pull. I don’t have trigger pull gage but estimate it was over 10 lbs. Spring kit easily installed by following video. Substantially reduced trigger pull. Note: Watch safety spring/plunger assembly when taking down & reassembling pistol. It can easily get away and is a pain to find if you don’t contain it.
Made a big improvement on trigger pull.
Very happy with this product, brought my Micro 9 driver pull from over 9# down to under 5#. Excellent instructional video as well.
It took me a little while to install (because I am a lefty), but the video was spot on. I recommend having all of the right tools prior to install. Trigger pull is perfect. Thanks MCarbo!
Installation was fairly easy with the use of the video and a few simple tools. I wasn't able to test my trigger pull before or after but you can definitely notice a difference. This greatly improved my accuracy at the range as I was no longer pulling my shots. Trigger pull is super light on the reset. In fact, one time, I inadvertently fired two shots in rapid succession. I'm very happy with this product, it does exactly what it says it will do.
The new springs were effective. My trigger pull was reduced from 7.9 lb to 4.2 lb. The installation video was very helpful and really well done. The installation went smooth, despite a small struggle putting in the sear. But, the video was really helpful here. Thanks M*CARBO!
I bought the Kimber Micro 9 / 9MM trigger package to help with the heavy trigger pull of the Micro 9 that will be my daughter’s first carry and it works great! She was not doing well at all with it due to the heavy trigger pull and really started to lose confidence in herself. But after I Installed your package yesterday, she she shot very well at the range today and had a lot of confidence with the gun. I wanted to say Great Job! And thanks!
My wife struggled with the factory trigger being so heavy the first day at the range and was disappointed with the new Kimber micro 9. After a quick and easy install of the new spring kit she is loving it. She was all over the place but now she is grouping like a pro. Thanks for the great product.
installed micro 9 trigger spring kit. printed instructions donot cover the sear spring. went to video and tried to remember,steps to install extractor and sear. big fingers and old eyes did not help. i finally suceeded. i recomend needle nose vise grip pliers. results well worth the effort. reduced trigger by over 2lbs and much smoother. thanks for a great product! Matt.
Followed the video and everything went together easily except for the pointed lower stand off in the hammer spring. I ended up putting the standoff in a vice and then it snapped right in. Everything else was a breeze to install and the trigger is noticeably lighter. I have tighter groups now and the gun runs flawlessly. Fantastic product and fantastic installation video.
Purchased the Mcarbo Micro 9 for my wife earlier in the year, but had to wait until 2 weeks before Christmas to order one. Installation was not as easy as portrayed in the video (probably more due to my fingers than the kit). But the results were worth it. Increased my wife's accuracy on first and follow-up shots. The trigger pull was reduced to 3 lbs Really nice upgrade!
Did exactly what it should. Install went very good.