Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Cost effective kit to improve on an already great pistol. The trigger feel on my Micro 9 improved drastically with this kit without going into "feather" trigger mode for non-carry mode. Another great product from MCarbo. Thanks.
After installing the mcarbo "kit", my micro9 came alive, I also put a 22 pound recoil spring in her along with highly polishing the feed ramp and rod. What a difference!, thanks mcarbo!!!!
Installation was easy thanks to a truly excellent instructional video provided on YouTube. The new trigger pull is crisp as can be and promises to improve accuracy. Just so much better than the stock spring setup. The only part that absolutely sucked during installation was repinning the sear, but that's always been a pain for me with 1911 style pistols. Just be sure to have a good set of precision needle nose pliers or some really heavy duty tweezers. Pro-tip for the sear: The trigger bar and sear spring will hold the sear in place once you wedge the sear in. From there, you can swap from the needle noses to a micro screwdriver. Looking in from the right side of the frame, you should be able to see the hold in the sear. Using your micro, gently push the sear up and toward the hammer, putting pressure on the retention pin. It might take a couple of tries, but eventually you'll get the angle right with the micro and the pin will find the sear hole. After that, everything's cake.
quick shipping, good price..!! it was SUPER easy to install, with the help of the very straight forward how to video... Highly recommend this item for anyone who want to improve the triger feel, and pull...!!
Video for installation was extremely easy to understand
Easy to follow installation video, measurable difference in trigger pull. Great product, great purchase.
Except for replacing the sear, a very easy installation with immediate, positive results. Quite Impressed with the product and will consider it for other pistols.
The instructional video was great and convinced me to purchase the spring set. Before installing the trigger pull was 7.2 lbs. (average of three) after about 3.7 (average of three). Looking forward to the stronger recoil spring.
I had read about the M*Carbo kit on several Internet forums, so as soon as the 1-year warranty on my Kimber was up I ordered. Installing the firing pin and hammer springs was a cinch - but getting the seer back in place was a challenge with my fat fingers! Still, the installation video took the guesswork out of the process. The results were great, about half the trigger-pull strength and improved control. REMEMBER to save the original springs, you may need to reinstall them if you ever send your pistol in for work.
Definitely improved my groupings, made it much more accurate, and has been 100% reliable for 250 rounds. Smooth, crisp, and lighter. What else could you ask for, very reasonably priced and easy to install.
Very easy to install, cut the trigger pull in half, two hundred rounds so far and no problems at all, quick response and shipping. Will order again.
Terrible factory trigger pull. Felt like 10 lb, but probably wasn't quite that bad. After installing the conversion kit the trigger pull is a DREAM. Wow. What an improvement! So glad I found this. Love the gun so much more than before. Install was pretty easy. Highly recommend. Thanks so much you guys!
I installed the Kimber Micro 9 spring set and I’m extremely happy with the results. Watching the YouTube video made it quick and easy, probably less than an hour. Received the parts sooner than expected. Good job mcarbo.
Took about an hour...I have very big hands needed my wives help with the Sear spring...Video is a huge help...EXTREMELY happy!
Really great product. As a 1911 shooter I like the ergonomics of the pistol esp. with 8 round mag but the trigger sucked. Very hard not to pull sights off target. Installed the spring kit with sear. Pretty easy if you watch the video. Big, big, difference. Weight feels in line with my 1911's - 3.5 - 4 lbs. Great reset. Not as crisp as a 1911 but what an improvement. Thanks to you guys for making my EDC awesome.
I took my Kimber Micro .380 to the range and thought I was going to raise a blister from the heavy trigger pull. I searched around and found the MCARBO Trigger Spring Kit and ordered it right away. Following the very detailed video, the replacement went very well. What a great service! Don't hesitate to try this fix! No more blisters!! Ha!