Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
Quality of the parts is very good visually. Can't check them to specs because I don't have any specs. So all parts fit as required and worked together so far. The other part of quality is the function over a period of time. Install was easy and didn't require any fitting so they probably fell into the acceptable dimensional tolerances. the gun itself is a basic 1944 type so if you're familiar with that it's easy, 25 minutes for me even though I shot a spring across my shop. Results were good but not as great as I would expect. Factory springs gave me trigger pulls of 6lb. 3.0oz., 7lb. 0.5oz, 7lb. 5.5oz., 7lb., 12.6oz., 7lb. 5.6oz. and 6lb. 14.8oz. The average was 7lb. 1.7oz. The low pull was 6lb. 3.0oz, high pull was 7lb. 12.60oz and variance was 1lb. 9.6oz which is quite large. M-Carbo springs gave me pulls of 5lb. 9.6oz., 5lb. 13.8oz., 5lb. 12.5oz., 6lb. 1.6oz., 5lb 13.4oz. and 5lb. 11.7oz. The average was 5lb. 13.4oz. The low pull was 5lb. 9.6oz., high pull was 6lb. 1.6oz. and the variance was 0lb. 8.0oz. (1/2 pound) which I thought was excellent for 3" barrel carry gun and says the quality is good. Overall I am satisfied with the results I got with the change. I would have liked a little lower trigger pull, close to a full pound lower would have been nice. The new the trigger pull is very smooth and has a very low variance in the weight making it very smooth. As I shoot it more I will see how it wears in and if the pull reduces at all. after 500 rounds or so if the pull is still a little high I will polish some parts down and see about reducing the pull a little more but for a carry gun this probably tolerable. Overall I would say this modification is mandatory for this pistol as the factory is unacceptable for accuracy for your average shooter.
The spring kit was easy to install. my trigger now feels as good as my Kimber grand raptor, light smooth and brakes like glass. Excellent customer service and parts
this spring kit took a good pistol and turned it into a great pistol . the trigger pull is just right .
Just got the kit today and installed. Big difference and works great! I don't have a trigger pull scale but can sure feel the difference. Easy install! Will get the AR-15 spring kits for my next order.
Great kit reduced trigger pull installed in 10 minutes after reviewing installation video. Made a pin pusher out of plastic dowel did not want to mark up anything. Did use 1/8 and 1/16 inch punch to hold spring down while inserting spring pin. I also used my drill press to push out main spring pin. Ne effort at all was needed for this. Your video is a Great help. Keep up the good work. Ed
Item was well packaged and shipped quickly. All items seem to be good quality. Installation was a 3 out of 10 for difficulty. I don't have a trigger scale but the trigger feels much better than stock. Haven't fired it yet to test for strength of primer strikes.
GREAT PRODUCT !!!
Less than 30 minutes to install. The overall performance enhancement was excellent.
It does what it supposed to do at beginning trigger pressure was 6 lb 2.2 oz And after it’s 2 lb 13.5 oz
When I first got my micro 9 I had some control problems because the gun is so light and the trigger pull was pretty firm. I installed the new spring kit which greatly reduced the trigger pull and now my groups are very tight with this great little gun. What a difference.
This spring kit is amazing! The trigger is nice about half the pull of the stock. The hammer is way lighter and easier to function. Don't hesitate to purchase! Shoots way better and I'm more accurate. Thanks mcarbo
The stock trigger pull on my Micro 9 Rapide was the worst I've seen for a higher priced pistol. Shame on Kimber! But the installation of the Trigger spring kit changed everything! Great quality parts and the installation videos are extremely helpful. Installing the sear spring gave me a little trouble but with the help of my wife, we got it done! Very satisfied!!
This spring kit does exactly what M*Carbo says it does. The trigger pull on my Micro 9 went from 8+ pounds to 4.5 lbs. But reinstalling the Ejector and Sear is not as simple as the video makes it appear. After three hours of swearing and chasing flying parts I finally got it put back together. If I ever do another one, I will PAY to have the kit installed.
Great spring kit does just what it says it’s going to do
Performs as advertised! Video was A+ with one exception My only problem was reassembling the sear and ejector. The video showed the ejector going in first and then the sear. I found it all but impossible to get the sear in position with my older eyes and arthritic hands. I wound up putting the sear in first, engaging it with the pin and then inserting the ejector and piloting the pin home. I also used a small strip of gun cleaning patch to grasp the sear with a forceps across the thickest area which made it easier to grip. Nice reduction in trigger pull 50%. Dry function check was perfect and live fire check was successful
I bought this kit based on several reviews on different websites and I must say I am not disappointed at all. The installation went smoothly and your step-by-step instructional video was extremely helpful as I had yet to tear this pistol down to that extent. The results have been awesome with a great reduction in trigger pull. Took a great little pistol to an excellent one!