Need assistance? Call the experts: (727) 223-1816
OR
Sign In
Review
This is the first time I ever left a review for anything or anyone. The results were as advertised on your youtube video. Easy to follow and 100% results. Trigger pull for both single and double action has improved, which improved my accuracy!!! Awesome product!
I started with a SA pull of about 5 lbs and a slightly gritty feel before the break. I found the youtube video and it seemed to be the solution. I purchased the Mcarbo spring kit and the stainless steel guide rod. I also acquired a Beretta skeletonized hammer and Wilson Combat short reach trigger (smaller fingers) to complete my upgrade. Following the video was straight forward except on the slide detent springs. Instead of a towel I tried putting the slide in a clear plastic bag so I can see what I'm doing and to capture them when they flew. It worked most of the time. Saves a lot of searching time and you can see what is going on. Anyway the key part of the video was the polishing of the sear and hammer which I think really clean up the feel of the trigger. After reassembly the SA trigger pull was about 4 lb and DA at 7 lb. The feel of the trigger was very clean and very crisp break. A very nice kit and excellent step by step video. Very easy to follow.
Made my trigger feel as light as air. The Beretta 92fs trigger is heavy from factory but with this trigger spring kit the pull is not only light but also as smooth as butter! Highly recommend it and with the install video, it was as easy to install as my new trigger is to pull!!
I bought my new 92FS and was honestly a little disappointed. It looked amazing but didn't preform as expected and the trigger/hammer weight was way too high. I decided to buy this upgrade kit and HOLY SMOKES, it made all the difference in the world. Use this kit along with the polishing kit and smooth out all the internals and Its night and day. Also the instructional video on youtube for installing them was very easy to follow. I opted to use the 12lb hammer spring and have had no issues so far with light primer strikes. My 92fs is now one of my favorites to shoot.
I installed this spring kit on a Gersan Regard. The outcome was as promised. Noticeably lighter trigger pull, I glad I went through the process. The MCarbo installation video was easy to follow, I would not have attempted it without that video.
I have 2 92s, one Italian, one USA. I've always loved the Beretta style, and performance. However I found the trigger pull, not so great from the factory. This is exactly what I needed to lighten the trigger pull. Instalation is difficult, but the video walks you through it step by step. I recommend watching it a few times before attempting to get familiar with the parts. The most difficult install I've ever attempted. But I did it, and it's worth it. I also got a kit for my Savage Axis. Not only did it reduce the trigger weight, it also feels so much smoother. I installed the kit on my USA one to compare to stock, night and day difference. I'm ordering another one for my Italian Beretta.
I installed the 13lbs hammer spring, trigger spring, and sear spring that came in the kit on my 92X. The pull weight is reduced and smooth. I further polished the internals as MCARBO did on their YouTube video which was essential to getting a smooth pull. The video is the best I have seen as of yet how to do this type of work and saved me money by not needing to feel like I had to pay a gunsmith to do the same work. A few of my friends were surprised at how smooth the trigger is now. Most of them shot M9s in the past, but hated the trigger weight and grit of the old M9s. I did not replace the original firing pin spring as I don’t feel the need for it now and with the the plans of getting a LTT trigger bar down the road, I think the gun is good to go. Unfortunately, I have only been able to dry fire the gun since I installed the parts, but there was no front sight movement while pulling in SA or DA. I will report further after I get some rounds out at the range. Can’t beat the results for the price so far.
Order the Beretta 92fs trigger parts, going though it I’ve gotten 2 trigger return strings instead of 1 return spring and 1 sear email them the issue no response. Besides that good parts
Another great product from a great company.
Great product, ALL INLUSIVE with the light sear spring and light firing pin spring! Top notch music wire is the best. Installed on a G model so you need 3 hands unlike the video, but it's do-able. M-CARBO hit a home run again!
Fast enough shipping.This kit made a world of difference in my Beretta 90-Two 40 cal. Easier to shoot with my Severe Rheumatoid Arthritis.
This is the second set of springs purchased from MCARBO. The first was for a Marlin 60. I was sold after that. I bought a Taurus PT92 with a 8.25 pound single action trigger - BAD ! This kit wasn't available then. I installed a Wilson Combat hammer spring and it helped some. The missing components were the trigger return and sear spring. This company dialed me in. Excellent service ! This gun now rocks. New single action pull is 5 pounds and breaks almost like 1911. No it's not a 2 pound trigger, but it breaks so clean and is so accurate. Fun to shoot. Install this kit and your 92 will be a shooter. Hope this helps and may God Bless !
Buying the beretta trigger kit has been the best online purchase I've made in a very long time. The customer service is second to none. The installation video makes it possible for anyone to install at home. And the product itself, YES, it definitely reduces trigger weight and makes the beretta feel like a whole different pistol. I wish I could do the whole thing over form start to finish...it was truly that pleasant to experience. Thanks guys!
Most other sites that sell trigger job kits, typically sell them for a lot more, and while they work, the end result is the same. So I'd say this is a great deal.
i bought the spring kit, steel guide rod and replaced all the components. i could not belive the performance at the range. it was like shooting a new gun. the recoil was so much less the trigger pull so much faster. the price for the kit cannont be beat. the how to video is great to show how to change everything. this has made me want to go shooting with it again. not your old issue duty pistol anymore for those of us who still carry it with these great upgrades.
This is a great upgrade for the M9! I followed along with the video and successfully installed the springs and polished my sear and hammer. I have the Girsan Regard gen 4 and everything works flawlessly. The safety/decocker is a bit different than a standard Beretta but easy to figure out. Don't hesitate to buy, I would/will again if I ever buy another M9! Thanks MCARBO for the great kit and video!!!